2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/include/linux/mfd/ti_am335x_tscadc.h
Linus Torvalds db0b2d0116 For the 3.13 merge window we have a couple of new drivers for the AMS
AS3722 PMIC and for STMicroelectronics STw481x PMIC.
 
 Although this is a smaller update than usual, we also have:
 
 - Device tree support for the max77693 driver.
 
 - linux/of.h inclusion for all DT compatible MFD drivers, to avoid build
   breakage in the future.
 
 - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver.
 
 - A small arizona update for new wm5110 DSP registers and a few fixes.
 
 - A small palmas update as well, including an of_device table addition
   and a few minor fixes.
 
 - Two small mfd-core changes, one including a memory leak fix for when
   mfd_add_device() fails.
 
 - Our usual round of minor cleanups and janitorial fixes.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.15 (GNU/Linux)
 
 iQIcBAABAgAGBQJShjufAAoJEIqAPN1PVmxKRoEP/jKe0UgrNA6G4xHSPX1Xcktc
 /kaQdcwJcTTHMpkIyQPFayItCcBPyb8bN1SdrQs4sds4ut7xyjve2uHz0KpZI6JO
 F+Rh6UVNkUIbcEx3jfh0DDv3pHv0vryFPnerkOIr0TFmSF1Tj29dRORQzpEqZ2fZ
 rstxmxNTG0ggP0Ug4ivv/YWjhGmO9CvKePJzQyImrC8QWCRDiARu072bG8xhVyHZ
 PkJTzJr2kjkI3whIY7Z04Nx90AtpikM4G27JiCwsHyv4vCCOtTtC9lRYb/IBUHWJ
 UhJiPvTygsU63opGOyAodR9LJxta0UCWm2Qn71ZuBAJmQ4oFxdZ7iVkWePjeSF5U
 2Jx9dUi1UWJQNCSB8HEpaUExybXdsNTwnSw8NIb6Gg2kygClj5KvzPMwz3ZHRKU/
 Ef1TGpWTeuok0zOijhBDUqAhq4KQv/H9Xjbm8FIMSBVGQgRBT3dkYTRZv30deeg/
 SIzoJGg7QiMDwlu/33k7aX7aIwJA2r6st/Q3OUKp/aBVqd6i24rL5+ZMykqcx5HJ
 x9GnvjrHgz+nAgF2yU6KQT1FrX1IQEM4F1tgMtroXQcCAGgoWoJRjW82gQqp6NE+
 eVbvsE56z2MiSNbiYUL4hdC03b/z8LbzP1zEt95Xc+sOf7NewMHYln7XkByBxrPH
 tlR20ZV44W25s7DYg7xh
 =nQ/p
 -----END PGP SIGNATURE-----

Merge tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD updates from Samuel Ortiz:
 "For the 3.13 merge window we have a couple of new drivers for the AMS
  AS3722 PMIC and for STMicroelectronics STw481x PMIC.

  Although this is a smaller update than usual, we also have:

   - Device tree support for the max77693 driver

   - linux/of.h inclusion for all DT compatible MFD drivers, to avoid
     build breakage in the future

   - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver

   - A small arizona update for new wm5110 DSP registers and a few fixes

   - A small palmas update as well, including an of_device table
     addition and a few minor fixes

   - Two small mfd-core changes, one including a memory leak fix for
     when mfd_add_device() fails

   - Our usual round of minor cleanups and janitorial fixes"

* tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits)
  Documentation: mfd: Update s2mps11.txt
  mfd: pm8921: Potential NULL dereference in pm8921_remove()
  mfd: Fix memory leak in mfd_add_devices()
  mfd: Stop setting refcounting pointers in original mfd_cell arrays
  mfd: wm5110: Enable micd clamp functionality
  mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH
  mfd: max77693: Fix up bug of wrong interrupt number
  mfd: as3722: Don't export the regmap config
  mfd: twl6040: Remove obsolete cleanup for i2c clientdata
  mfd: tps65910: Remove warning during dt node parsing
  mfd: lpc_sch: Ignore resource conflicts when adding mfd cells
  mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock
  mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled
  mfd: Add support for ams AS3722 PMIC
  mfd: max77693: Include linux/of.h header
  mfd: tc3589x: Detect the precise version
  mfd: omap-usb: prepare/unprepare clock while enable/disable
  mfd: max77686: Include linux/of.h header
  mfd: max8907: Include linux/of.h header
  mfd: max8997: Include linux/of.h header
  ...
2013-11-15 16:37:40 -08:00

184 lines
5.3 KiB
C

#ifndef __LINUX_TI_AM335X_TSCADC_MFD_H
#define __LINUX_TI_AM335X_TSCADC_MFD_H
/*
* TI Touch Screen / ADC MFD driver
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mfd/core.h>
#define REG_RAWIRQSTATUS 0x024
#define REG_IRQSTATUS 0x028
#define REG_IRQENABLE 0x02C
#define REG_IRQCLR 0x030
#define REG_IRQWAKEUP 0x034
#define REG_CTRL 0x040
#define REG_ADCFSM 0x044
#define REG_CLKDIV 0x04C
#define REG_SE 0x054
#define REG_IDLECONFIG 0x058
#define REG_CHARGECONFIG 0x05C
#define REG_CHARGEDELAY 0x060
#define REG_STEPCONFIG(n) (0x64 + ((n) * 8))
#define REG_STEPDELAY(n) (0x68 + ((n) * 8))
#define REG_FIFO0CNT 0xE4
#define REG_FIFO0THR 0xE8
#define REG_FIFO1CNT 0xF0
#define REG_FIFO1THR 0xF4
#define REG_FIFO0 0x100
#define REG_FIFO1 0x200
/* Register Bitfields */
/* IRQ wakeup enable */
#define IRQWKUP_ENB BIT(0)
/* Step Enable */
#define STEPENB_MASK (0x1FFFF << 0)
#define STEPENB(val) ((val) << 0)
#define ENB(val) (1 << (val))
#define STPENB_STEPENB STEPENB(0x1FFFF)
#define STPENB_STEPENB_TC STEPENB(0x1FFF)
/* IRQ enable */
#define IRQENB_HW_PEN BIT(0)
#define IRQENB_FIFO0THRES BIT(2)
#define IRQENB_FIFO0OVRRUN BIT(3)
#define IRQENB_FIFO0UNDRFLW BIT(4)
#define IRQENB_FIFO1THRES BIT(5)
#define IRQENB_FIFO1OVRRUN BIT(6)
#define IRQENB_FIFO1UNDRFLW BIT(7)
#define IRQENB_PENUP BIT(9)
/* Step Configuration */
#define STEPCONFIG_MODE_MASK (3 << 0)
#define STEPCONFIG_MODE(val) ((val) << 0)
#define STEPCONFIG_MODE_SWCNT STEPCONFIG_MODE(1)
#define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2)
#define STEPCONFIG_AVG_MASK (7 << 2)
#define STEPCONFIG_AVG(val) ((val) << 2)
#define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4)
#define STEPCONFIG_XPP BIT(5)
#define STEPCONFIG_XNN BIT(6)
#define STEPCONFIG_YPP BIT(7)
#define STEPCONFIG_YNN BIT(8)
#define STEPCONFIG_XNP BIT(9)
#define STEPCONFIG_YPN BIT(10)
#define STEPCONFIG_INM_MASK (0xF << 15)
#define STEPCONFIG_INM(val) ((val) << 15)
#define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8)
#define STEPCONFIG_INP_MASK (0xF << 19)
#define STEPCONFIG_INP(val) ((val) << 19)
#define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4)
#define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8)
#define STEPCONFIG_FIFO1 BIT(26)
/* Delay register */
#define STEPDELAY_OPEN_MASK (0x3FFFF << 0)
#define STEPDELAY_OPEN(val) ((val) << 0)
#define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098)
#define STEPDELAY_SAMPLE_MASK (0xFF << 24)
#define STEPDELAY_SAMPLE(val) ((val) << 24)
#define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0)
/* Charge Config */
#define STEPCHARGE_RFP_MASK (7 << 12)
#define STEPCHARGE_RFP(val) ((val) << 12)
#define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1)
#define STEPCHARGE_INM_MASK (0xF << 15)
#define STEPCHARGE_INM(val) ((val) << 15)
#define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1)
#define STEPCHARGE_INP_MASK (0xF << 19)
#define STEPCHARGE_INP(val) ((val) << 19)
#define STEPCHARGE_RFM_MASK (3 << 23)
#define STEPCHARGE_RFM(val) ((val) << 23)
#define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1)
/* Charge delay */
#define CHARGEDLY_OPEN_MASK (0x3FFFF << 0)
#define CHARGEDLY_OPEN(val) ((val) << 0)
#define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(1)
/* Control register */
#define CNTRLREG_TSCSSENB BIT(0)
#define CNTRLREG_STEPID BIT(1)
#define CNTRLREG_STEPCONFIGWRT BIT(2)
#define CNTRLREG_POWERDOWN BIT(4)
#define CNTRLREG_AFE_CTRL_MASK (3 << 5)
#define CNTRLREG_AFE_CTRL(val) ((val) << 5)
#define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1)
#define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2)
#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3)
#define CNTRLREG_TSCENB BIT(7)
/* FIFO READ Register */
#define FIFOREAD_DATA_MASK (0xfff << 0)
#define FIFOREAD_CHNLID_MASK (0xf << 16)
/* Sequencer Status */
#define SEQ_STATUS BIT(5)
#define ADC_CLK 3000000
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
#define FIFO1_THRESHOLD 19
/*
* time in us for processing a single channel, calculated as follows:
*
* num cycles = open delay + (sample delay + conv time) * averaging
*
* num cycles: 152 + (1 + 13) * 16 = 376
*
* clock frequency: 26MHz / 8 = 3.25MHz
* clock period: 1 / 3.25MHz = 308ns
*
* processing time: 376 * 308ns = 116us
*/
#define IDLE_TIMEOUT 116 /* microsec */
#define TSCADC_CELLS 2
struct ti_tscadc_dev {
struct device *dev;
struct regmap *regmap_tscadc;
void __iomem *tscadc_base;
int irq;
int used_cells; /* 1-2 */
int tsc_cell; /* -1 if not used */
int adc_cell; /* -1 if not used */
struct mfd_cell cells[TSCADC_CELLS];
u32 reg_se_cache;
spinlock_t reg_lock;
unsigned int clk_div;
/* tsc device */
struct titsc *tsc;
/* adc device */
struct adc_device *adc;
};
static inline struct ti_tscadc_dev *ti_tscadc_dev_get(struct platform_device *p)
{
struct ti_tscadc_dev **tscadc_dev = p->dev.platform_data;
return *tscadc_dev;
}
void am335x_tsc_se_update(struct ti_tscadc_dev *tsadc);
void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val);
void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val);
#endif