2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/arch/arm/mach-omap2/devices.c
Arnd Bergmann 0081b77d98 SoC related changes for omaps for v3.17 merge window:
- Add device tree and hwmod data for various devices
   for new SoCs
 
 - Remove legacy mailbox hwmod data that's no longer
   needed for SoCs that are DT only. Note that this may
   cause a minor merge conflict in mach-omap2/devices.c
   with omap_init_mbox() and omap_init_hdmi_audio(), both
   are legacy code that is getting removed
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT0PR7AAoJEBvUPslcq6VzcUkP/RlSR5qip8BgSsar600B/W11
 JFKl8t4VNcoutv109UYrmHaodYDsou6Sgj3QhZk1iQ8Sl76TCXDbF2LUtlpEt4VR
 tpzr01o9gRw7SqxOxpIo6AB6owNmfiEhlRX9OsbGC5efgVFPJUO3ycK7ap2JdKbr
 Cr976YBE6RVe5JDrQAbKGThilOoidOxUAFToXNbo72VM59V0E8J8LQQJHHs6oWeR
 fz6p1sj1P45xUO8/LQ11Aaz5iQ/6bai4sHHZffFcglfjqxEHx5xFbFriEuUS5s+9
 dmfyvP1fy7dkiLVFo5KZuDVUBMnLGFUWUWlmxf/dMH+dw4yjxRlyXSxLHa2U8vAO
 ttRHBBCph5y2gxSYBvkVXdqV4DdgrIjS7yWUJBnXo+73N/8CfFjOv/kc7l7p2vCu
 7uNa7c03+xVG/+EhZPMPxI4nzhb8KRLqZ9k8+FhIfvzuHdA2x//BGYvjmLdi84fk
 aEptRjeM5Shvgf89r/OThAiQmQYjMCxUB16jcZVyTaIj6C3sFnudWJR/N0VEaPnZ
 QdlbvgN9w+/cvWWFA1P11wgriDKWWS6nWz24tp/YvBI12cIl//NXO8FNv+sOV6Jt
 zpjqJTa16c3SxPKTkv6yIzdB5h5Jxouw/EXzrT0Uj5gL0kRqwA17FEdySR31uSDl
 F/T9CcZK7JMIx9uCQ8Hf
 =lKl0
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.17/soc-new' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Merge "SoC related changes for omaps for v3.17 merge window"
from Tony Lindgren:

- Add device tree and hwmod data for various devices
  for new SoCs

- Remove legacy mailbox hwmod data that's no longer
  needed for SoCs that are DT only. Note that this may
  cause a minor merge conflict in mach-omap2/devices.c
  with omap_init_mbox() and omap_init_hdmi_audio(), both
  are legacy code that is getting removed

* tag 'omap-for-v3.17/soc-new' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: DRA7: hwmod: Add data for RTC
  arm: dra7xx: Add hwmod data for MDIO and CPSW
  arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
  arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
  ARM: DRA7: hwmod: Add OCP2SCP3 module
  ARM: DRA7: hwmod: remove interrupts for DMA
  ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver
  ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs
  ARM: OMAP4: hwmod_data: Remove legacy mailbox addrs
  ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
  ARM: OMAP2+: Avoid mailbox legacy device creation for DT-boot
  ARM: DRA7: hwmod_data: Add mailbox hwmod data
  ARM: dts: DRA7: Add mailbox nodes
  ARM: dts: AM4372: Correct mailbox node data
  ARM: dts: AM33xx: Add mailbox node
  ARM: dts: OMAP4: Add mailbox node
  ARM: dts: OMAP2+: Add mailbox fifo and user information
  ARM: AM43xx: hwmod: add DSS hwmod data

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-26 11:33:34 +02:00

448 lines
10 KiB
C

/*
* linux/arch/arm/mach-omap2/devices.c
*
* OMAP2 platform device setup/initialization
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/mailbox-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <linux/omap-dma.h>
#include "iomap.h"
#include "omap_hwmod.h"
#include "omap_device.h"
#include "soc.h"
#include "common.h"
#include "mux.h"
#include "control.h"
#include "devices.h"
#include "display.h"
#define L3_MODULES_MAX_LEN 12
#define L3_MODULES 3
static int __init omap3_l3_init(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/*
* To avoid code running on other OMAPs in
* multi-omap builds
*/
if (!(cpu_is_omap34xx()))
return -ENODEV;
snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
oh = omap_hwmod_lookup(oh_name);
if (!oh)
pr_err("could not look up %s\n", oh_name);
pdev = omap_device_build("omap_l3_smx", 0, oh, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
return PTR_RET(pdev);
}
omap_postcore_initcall(omap3_l3_init);
static int __init omap4_l3_init(void)
{
int i;
struct omap_hwmod *oh[3];
struct platform_device *pdev;
char oh_name[L3_MODULES_MAX_LEN];
/* If dtb is there, the devices will be created dynamically */
if (of_have_populated_dt())
return -ENODEV;
/*
* To avoid code running on other OMAPs in
* multi-omap builds
*/
if (!cpu_is_omap44xx() && !soc_is_omap54xx())
return -ENODEV;
for (i = 0; i < L3_MODULES; i++) {
snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
oh[i] = omap_hwmod_lookup(oh_name);
if (!(oh[i]))
pr_err("could not look up %s\n", oh_name);
}
pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0);
WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
return PTR_RET(pdev);
}
omap_postcore_initcall(omap4_l3_init);
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource omap2cam_resources[] = {
{
.start = OMAP24XX_CAMERA_BASE,
.end = OMAP24XX_CAMERA_BASE + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device omap2cam_device = {
.name = "omap24xxcam",
.id = -1,
.num_resources = ARRAY_SIZE(omap2cam_resources),
.resource = omap2cam_resources,
};
#endif
#if defined(CONFIG_IOMMU_API)
#include <linux/platform_data/iommu-omap.h>
static struct resource omap3isp_resources[] = {
{
.start = OMAP3430_ISP_BASE,
.end = OMAP3430_ISP_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CCP2_BASE,
.end = OMAP3430_ISP_CCP2_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CCDC_BASE,
.end = OMAP3430_ISP_CCDC_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_HIST_BASE,
.end = OMAP3430_ISP_HIST_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_H3A_BASE,
.end = OMAP3430_ISP_H3A_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_PREV_BASE,
.end = OMAP3430_ISP_PREV_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_RESZ_BASE,
.end = OMAP3430_ISP_RESZ_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_SBL_BASE,
.end = OMAP3430_ISP_SBL_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CSI2A_REGS1_BASE,
.end = OMAP3430_ISP_CSI2A_REGS1_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CSIPHY2_BASE,
.end = OMAP3430_ISP_CSIPHY2_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3630_ISP_CSI2A_REGS2_BASE,
.end = OMAP3630_ISP_CSI2A_REGS2_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3630_ISP_CSI2C_REGS1_BASE,
.end = OMAP3630_ISP_CSI2C_REGS1_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3630_ISP_CSIPHY1_BASE,
.end = OMAP3630_ISP_CSIPHY1_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3630_ISP_CSI2C_REGS2_BASE,
.end = OMAP3630_ISP_CSI2C_REGS2_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE,
.end = OMAP343X_CTRL_BASE + OMAP343X_CONTROL_CSIRXFE + 3,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP343X_CTRL_BASE + OMAP3630_CONTROL_CAMERA_PHY_CTRL,
.end = OMAP343X_CTRL_BASE + OMAP3630_CONTROL_CAMERA_PHY_CTRL + 3,
.flags = IORESOURCE_MEM,
},
{
.start = 24 + OMAP_INTC_START,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device omap3isp_device = {
.name = "omap3isp",
.id = -1,
.num_resources = ARRAY_SIZE(omap3isp_resources),
.resource = omap3isp_resources,
};
static struct omap_iommu_arch_data omap3_isp_iommu = {
.name = "mmu_isp",
};
int omap3_init_camera(struct isp_platform_data *pdata)
{
if (of_have_populated_dt())
omap3_isp_iommu.name = "480bd400.mmu";
omap3isp_device.dev.platform_data = pdata;
omap3isp_device.dev.archdata.iommu = &omap3_isp_iommu;
return platform_device_register(&omap3isp_device);
}
#else /* !CONFIG_IOMMU_API */
int omap3_init_camera(struct isp_platform_data *pdata)
{
return 0;
}
#endif
static inline void omap_init_camera(void)
{
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
if (cpu_is_omap24xx())
platform_device_register(&omap2cam_device);
#endif
}
#if defined(CONFIG_OMAP2PLUS_MBOX) || defined(CONFIG_OMAP2PLUS_MBOX_MODULE)
static inline void __init omap_init_mbox(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
struct omap_mbox_pdata *pdata;
oh = omap_hwmod_lookup("mailbox");
if (!oh) {
pr_err("%s: unable to find hwmod\n", __func__);
return;
}
if (!oh->dev_attr) {
pr_err("%s: hwmod doesn't have valid attrs\n", __func__);
return;
}
pdata = (struct omap_mbox_pdata *)oh->dev_attr;
pdev = omap_device_build("omap-mailbox", -1, oh, pdata, sizeof(*pdata));
WARN(IS_ERR(pdev), "%s: could not build device, err %ld\n",
__func__, PTR_ERR(pdev));
}
#else
static inline void omap_init_mbox(void) { }
#endif /* CONFIG_OMAP2PLUS_MBOX */
static inline void omap_init_sti(void) {}
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
static struct platform_device omap_pcm = {
.name = "omap-pcm-audio",
.id = -1,
};
static void omap_init_audio(void)
{
platform_device_register(&omap_pcm);
}
#else
static inline void omap_init_audio(void) {}
#endif
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <linux/platform_data/spi-omap2-mcspi.h>
static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
struct platform_device *pdev;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
struct omap2_mcspi_dev_attr *mcspi_attrib = oh->dev_attr;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
pr_err("Memory allocation for McSPI device failed\n");
return -ENOMEM;
}
pdata->num_cs = mcspi_attrib->num_chipselect;
switch (oh->class->rev) {
case OMAP2_MCSPI_REV:
case OMAP3_MCSPI_REV:
pdata->regs_offset = 0;
break;
case OMAP4_MCSPI_REV:
pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET;
break;
default:
pr_err("Invalid McSPI Revision value\n");
kfree(pdata);
return -EINVAL;
}
spi_num++;
pdev = omap_device_build(name, spi_num, oh, pdata, sizeof(*pdata));
WARN(IS_ERR(pdev), "Can't build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
}
static void omap_init_mcspi(void)
{
omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL);
}
#else
static inline void omap_init_mcspi(void) {}
#endif
/**
* omap_init_rng - bind the RNG hwmod to the RNG omap_device
*
* Bind the RNG hwmod to the RNG omap_device. No return value.
*/
static void omap_init_rng(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("rng");
if (!oh)
return;
pdev = omap_device_build("omap_rng", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap_rng\n");
}
static void __init omap_init_sham(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("sham");
if (!oh)
return;
pdev = omap_device_build("omap-sham", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-sham\n");
}
static void __init omap_init_aes(void)
{
struct omap_hwmod *oh;
struct platform_device *pdev;
oh = omap_hwmod_lookup("aes");
if (!oh)
return;
pdev = omap_device_build("omap-aes", -1, oh, NULL, 0);
WARN(IS_ERR(pdev), "Can't build omap_device for omap-aes\n");
}
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
};
#else
static struct resource omap_vout_resource[2] = {
};
#endif
static struct platform_device omap_vout_device = {
.name = "omap_vout",
.num_resources = ARRAY_SIZE(omap_vout_resource),
.resource = &omap_vout_resource[0],
.id = -1,
};
int __init omap_init_vout(void)
{
return platform_device_register(&omap_vout_device);
}
#else
int __init omap_init_vout(void) { return 0; }
#endif
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
{
/* Enable dummy states for those platforms without pinctrl support */
if (!of_have_populated_dt())
pinctrl_provide_dummies();
/*
* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_init_audio();
omap_init_camera();
/* If dtb is there, the devices will be created dynamically */
if (!of_have_populated_dt()) {
omap_init_mbox();
omap_init_mcspi();
omap_init_sham();
omap_init_aes();
omap_init_rng();
}
omap_init_sti();
return 0;
}
omap_arch_initcall(omap2_init_devices);