mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 23:53:55 +08:00
d2bf75f4f6
In the initial driver we cancelled deferred work, but there is still a
window of time where a new interrupt could result in new deferred work
executed after the link is disabled, leading to an IO error. While we
did not see this IO error on RT711-sdca-based platforms, the code pattern
is similar to the RT700 case where the IO error was noted, so the fix
is added for consistency.
This patch uses an 'disable_irq_lock' mutex to prevent new interrupts
from happening after the start of the system suspend. The choice of a
mutex v. a spinlock is mainly due to the time required to clear
interrupts, which requires a command to be transmitted by the
SoundWire host IP and acknowledged with an interrupt. The
'interrupt_callback' routine is also not meant to be called from an
interrupt context.
An additional 'disable_irq' flag prevents race conditions where the
status changes before the interrupts are disabled, but the workqueue
handling status changes is scheduled after the completion of the
system suspend. On resume the interrupts are re-enabled already by the
io_init routine so we only clear the flag.
The code is slightly different from the other codecs since the
interrupt callback deals with the SDCA interrupts, leading to a much
larger section that's protected by the mutex. The SoundWire interrupt
scheme requires a read after clearing a status, it's not clear from
the specifications what would happen if SDCA interrupts are disabled
in the middle of the sequence, so the entire interrupt status
read/write is kept as is, even if in the end we discard the
information.
BugLink: https://github.com/thesofproject/linux/issues/2943
Fixes: 7ad4d237e7
('ASoC: rt711-sdca: Add RT711 SDCA vendor-specific driver')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210614180815.153711-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
478 lines
14 KiB
C
478 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
//
|
|
// rt711-sdw-sdca.c -- rt711 SDCA ALSA SoC audio driver
|
|
//
|
|
// Copyright(c) 2021 Realtek Semiconductor Corp.
|
|
//
|
|
//
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/soundwire/sdw_registers.h>
|
|
#include <linux/module.h>
|
|
|
|
#include "rt711-sdca.h"
|
|
#include "rt711-sdca-sdw.h"
|
|
|
|
static bool rt711_sdca_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0x201a ... 0x2027:
|
|
case 0x2029 ... 0x202a:
|
|
case 0x202d ... 0x2034:
|
|
case 0x2200 ... 0x2204:
|
|
case 0x2206 ... 0x2212:
|
|
case 0x2220 ... 0x2223:
|
|
case 0x2230 ... 0x2239:
|
|
case 0x2f01 ... 0x2f0f:
|
|
case 0x2f30 ... 0x2f36:
|
|
case 0x2f50 ... 0x2f5a:
|
|
case 0x2f60:
|
|
case 0x3200 ... 0x3212:
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_GE49, RT711_SDCA_CTL_SELECTED_MODE, 0):
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_GE49, RT711_SDCA_CTL_DETECTED_MODE, 0):
|
|
case SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_CURRENT_OWNER, 0) ...
|
|
SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_MESSAGE_LENGTH, 0):
|
|
case RT711_BUF_ADDR_HID1 ... RT711_BUF_ADDR_HID2:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rt711_sdca_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0x201b:
|
|
case 0x201c:
|
|
case 0x201d:
|
|
case 0x201f:
|
|
case 0x2021:
|
|
case 0x2023:
|
|
case 0x2230:
|
|
case 0x202d ... 0x202f: /* BRA */
|
|
case 0x2200 ... 0x2212: /* i2c debug */
|
|
case RT711_RC_CAL_STATUS:
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_GE49, RT711_SDCA_CTL_DETECTED_MODE, 0):
|
|
case SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_CURRENT_OWNER, 0) ...
|
|
SDW_SDCA_CTL(FUNC_NUM_HID, RT711_SDCA_ENT_HID01, RT711_SDCA_CTL_HIDTX_MESSAGE_LENGTH, 0):
|
|
case RT711_BUF_ADDR_HID1 ... RT711_BUF_ADDR_HID2:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rt711_sdca_mbq_readable_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0x2000000 ... 0x20000ff:
|
|
case 0x5600000 ... 0x56000ff:
|
|
case 0x5700000 ... 0x57000ff:
|
|
case 0x5800000 ... 0x58000ff:
|
|
case 0x5900000 ... 0x59000ff:
|
|
case 0x5b00000 ... 0x5b000ff:
|
|
case 0x5f00000 ... 0x5f000ff:
|
|
case 0x6100000 ... 0x61000ff:
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU05, RT711_SDCA_CTL_FU_VOLUME, CH_L):
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU05, RT711_SDCA_CTL_FU_VOLUME, CH_R):
|
|
case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_USER_FU1E, RT711_SDCA_CTL_FU_VOLUME, CH_L):
|
|
case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_USER_FU1E, RT711_SDCA_CTL_FU_VOLUME, CH_R):
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU0F, RT711_SDCA_CTL_FU_VOLUME, CH_L):
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_USER_FU0F, RT711_SDCA_CTL_FU_VOLUME, CH_R):
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_PLATFORM_FU44, RT711_SDCA_CTL_FU_CH_GAIN, CH_L):
|
|
case SDW_SDCA_CTL(FUNC_NUM_JACK_CODEC, RT711_SDCA_ENT_PLATFORM_FU44, RT711_SDCA_CTL_FU_CH_GAIN, CH_R):
|
|
case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_PLATFORM_FU15, RT711_SDCA_CTL_FU_CH_GAIN, CH_L):
|
|
case SDW_SDCA_CTL(FUNC_NUM_MIC_ARRAY, RT711_SDCA_ENT_PLATFORM_FU15, RT711_SDCA_CTL_FU_CH_GAIN, CH_R):
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static bool rt711_sdca_mbq_volatile_register(struct device *dev, unsigned int reg)
|
|
{
|
|
switch (reg) {
|
|
case 0x2000000:
|
|
case 0x200001a:
|
|
case 0x2000046:
|
|
case 0x2000080:
|
|
case 0x2000081:
|
|
case 0x2000083:
|
|
case 0x5800000:
|
|
case 0x5800001:
|
|
case 0x5f00001:
|
|
case 0x6100008:
|
|
return true;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static const struct regmap_config rt711_sdca_regmap = {
|
|
.reg_bits = 32,
|
|
.val_bits = 8,
|
|
.readable_reg = rt711_sdca_readable_register,
|
|
.volatile_reg = rt711_sdca_volatile_register,
|
|
.max_register = 0x44ffffff,
|
|
.reg_defaults = rt711_sdca_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(rt711_sdca_reg_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static const struct regmap_config rt711_sdca_mbq_regmap = {
|
|
.name = "sdw-mbq",
|
|
.reg_bits = 32,
|
|
.val_bits = 16,
|
|
.readable_reg = rt711_sdca_mbq_readable_register,
|
|
.volatile_reg = rt711_sdca_mbq_volatile_register,
|
|
.max_register = 0x40800f12,
|
|
.reg_defaults = rt711_sdca_mbq_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(rt711_sdca_mbq_defaults),
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.use_single_read = true,
|
|
.use_single_write = true,
|
|
};
|
|
|
|
static int rt711_sdca_update_status(struct sdw_slave *slave,
|
|
enum sdw_slave_status status)
|
|
{
|
|
struct rt711_sdca_priv *rt711 = dev_get_drvdata(&slave->dev);
|
|
|
|
/* Update the status */
|
|
rt711->status = status;
|
|
|
|
if (status == SDW_SLAVE_UNATTACHED)
|
|
rt711->hw_init = false;
|
|
|
|
if (status == SDW_SLAVE_ATTACHED) {
|
|
if (rt711->hs_jack) {
|
|
/*
|
|
* Due to the SCP_SDCA_INTMASK will be cleared by any reset, and then
|
|
* if the device attached again, we will need to set the setting back.
|
|
* It could avoid losing the jack detection interrupt.
|
|
* This also could sync with the cache value as the rt711_sdca_jack_init set.
|
|
*/
|
|
sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INTMASK1,
|
|
SDW_SCP_SDCA_INTMASK_SDCA_0);
|
|
sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INTMASK2,
|
|
SDW_SCP_SDCA_INTMASK_SDCA_8);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Perform initialization only if slave status is present and
|
|
* hw_init flag is false
|
|
*/
|
|
if (rt711->hw_init || rt711->status != SDW_SLAVE_ATTACHED)
|
|
return 0;
|
|
|
|
/* perform I/O transfers required for Slave initialization */
|
|
return rt711_sdca_io_init(&slave->dev, slave);
|
|
}
|
|
|
|
static int rt711_sdca_read_prop(struct sdw_slave *slave)
|
|
{
|
|
struct sdw_slave_prop *prop = &slave->prop;
|
|
int nval;
|
|
int i, j;
|
|
u32 bit;
|
|
unsigned long addr;
|
|
struct sdw_dpn_prop *dpn;
|
|
|
|
prop->scp_int1_mask = SDW_SCP_INT1_BUS_CLASH | SDW_SCP_INT1_PARITY;
|
|
prop->quirks = SDW_SLAVE_QUIRKS_INVALID_INITIAL_PARITY;
|
|
prop->is_sdca = true;
|
|
|
|
prop->paging_support = true;
|
|
|
|
/* first we need to allocate memory for set bits in port lists */
|
|
prop->source_ports = 0x14; /* BITMAP: 00010100 */
|
|
prop->sink_ports = 0x8; /* BITMAP: 00001000 */
|
|
|
|
nval = hweight32(prop->source_ports);
|
|
prop->src_dpn_prop = devm_kcalloc(&slave->dev, nval,
|
|
sizeof(*prop->src_dpn_prop), GFP_KERNEL);
|
|
if (!prop->src_dpn_prop)
|
|
return -ENOMEM;
|
|
|
|
i = 0;
|
|
dpn = prop->src_dpn_prop;
|
|
addr = prop->source_ports;
|
|
for_each_set_bit(bit, &addr, 32) {
|
|
dpn[i].num = bit;
|
|
dpn[i].type = SDW_DPN_FULL;
|
|
dpn[i].simple_ch_prep_sm = true;
|
|
dpn[i].ch_prep_timeout = 10;
|
|
i++;
|
|
}
|
|
|
|
/* do this again for sink now */
|
|
nval = hweight32(prop->sink_ports);
|
|
prop->sink_dpn_prop = devm_kcalloc(&slave->dev, nval,
|
|
sizeof(*prop->sink_dpn_prop), GFP_KERNEL);
|
|
if (!prop->sink_dpn_prop)
|
|
return -ENOMEM;
|
|
|
|
j = 0;
|
|
dpn = prop->sink_dpn_prop;
|
|
addr = prop->sink_ports;
|
|
for_each_set_bit(bit, &addr, 32) {
|
|
dpn[j].num = bit;
|
|
dpn[j].type = SDW_DPN_FULL;
|
|
dpn[j].simple_ch_prep_sm = true;
|
|
dpn[j].ch_prep_timeout = 10;
|
|
j++;
|
|
}
|
|
|
|
/* set the timeout values */
|
|
prop->clk_stop_timeout = 20;
|
|
|
|
/* wake-up event */
|
|
prop->wake_capable = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rt711_sdca_interrupt_callback(struct sdw_slave *slave,
|
|
struct sdw_slave_intr_status *status)
|
|
{
|
|
struct rt711_sdca_priv *rt711 = dev_get_drvdata(&slave->dev);
|
|
int ret, stat;
|
|
int count = 0, retry = 3;
|
|
unsigned int sdca_cascade, scp_sdca_stat1, scp_sdca_stat2 = 0;
|
|
|
|
dev_dbg(&slave->dev,
|
|
"%s control_port_stat=%x, sdca_cascade=%x", __func__,
|
|
status->control_port, status->sdca_cascade);
|
|
|
|
if (cancel_delayed_work_sync(&rt711->jack_detect_work)) {
|
|
dev_warn(&slave->dev, "%s the pending delayed_work was cancelled", __func__);
|
|
/* avoid the HID owner doesn't change to device */
|
|
if (rt711->scp_sdca_stat2)
|
|
scp_sdca_stat2 = rt711->scp_sdca_stat2;
|
|
}
|
|
|
|
/*
|
|
* The critical section below intentionally protects a rather large piece of code.
|
|
* We don't want to allow the system suspend to disable an interrupt while we are
|
|
* processing it, which could be problematic given the quirky SoundWire interrupt
|
|
* scheme. We do want however to prevent new workqueues from being scheduled if
|
|
* the disable_irq flag was set during system suspend.
|
|
*/
|
|
mutex_lock(&rt711->disable_irq_lock);
|
|
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT1);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
rt711->scp_sdca_stat1 = ret;
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT2);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
rt711->scp_sdca_stat2 = ret;
|
|
if (scp_sdca_stat2)
|
|
rt711->scp_sdca_stat2 |= scp_sdca_stat2;
|
|
|
|
do {
|
|
/* clear flag */
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT1);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
if (ret & SDW_SCP_SDCA_INTMASK_SDCA_0) {
|
|
ret = sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INT1,
|
|
SDW_SCP_SDCA_INTMASK_SDCA_0);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
}
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT2);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
if (ret & SDW_SCP_SDCA_INTMASK_SDCA_8) {
|
|
ret = sdw_write_no_pm(rt711->slave, SDW_SCP_SDCA_INT2,
|
|
SDW_SCP_SDCA_INTMASK_SDCA_8);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
}
|
|
|
|
/* check if flag clear or not */
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_DP0_INT);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
sdca_cascade = ret & SDW_DP0_SDCA_CASCADE;
|
|
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT1);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
scp_sdca_stat1 = ret & SDW_SCP_SDCA_INTMASK_SDCA_0;
|
|
|
|
ret = sdw_read_no_pm(rt711->slave, SDW_SCP_SDCA_INT2);
|
|
if (ret < 0)
|
|
goto io_error;
|
|
scp_sdca_stat2 = ret & SDW_SCP_SDCA_INTMASK_SDCA_8;
|
|
|
|
stat = scp_sdca_stat1 || scp_sdca_stat2 || sdca_cascade;
|
|
|
|
count++;
|
|
} while (stat != 0 && count < retry);
|
|
|
|
if (stat)
|
|
dev_warn(&slave->dev,
|
|
"%s scp_sdca_stat1=0x%x, scp_sdca_stat2=0x%x\n", __func__,
|
|
rt711->scp_sdca_stat1, rt711->scp_sdca_stat2);
|
|
|
|
if (status->sdca_cascade && !rt711->disable_irq)
|
|
mod_delayed_work(system_power_efficient_wq,
|
|
&rt711->jack_detect_work, msecs_to_jiffies(30));
|
|
|
|
mutex_unlock(&rt711->disable_irq_lock);
|
|
|
|
return 0;
|
|
|
|
io_error:
|
|
mutex_unlock(&rt711->disable_irq_lock);
|
|
pr_err_ratelimited("IO error in %s, ret %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
static struct sdw_slave_ops rt711_sdca_slave_ops = {
|
|
.read_prop = rt711_sdca_read_prop,
|
|
.interrupt_callback = rt711_sdca_interrupt_callback,
|
|
.update_status = rt711_sdca_update_status,
|
|
};
|
|
|
|
static int rt711_sdca_sdw_probe(struct sdw_slave *slave,
|
|
const struct sdw_device_id *id)
|
|
{
|
|
struct regmap *regmap, *mbq_regmap;
|
|
|
|
/* Regmap Initialization */
|
|
mbq_regmap = devm_regmap_init_sdw_mbq(slave, &rt711_sdca_mbq_regmap);
|
|
if (IS_ERR(mbq_regmap))
|
|
return PTR_ERR(mbq_regmap);
|
|
|
|
regmap = devm_regmap_init_sdw(slave, &rt711_sdca_regmap);
|
|
if (IS_ERR(regmap))
|
|
return PTR_ERR(regmap);
|
|
|
|
return rt711_sdca_init(&slave->dev, regmap, mbq_regmap, slave);
|
|
}
|
|
|
|
static int rt711_sdca_sdw_remove(struct sdw_slave *slave)
|
|
{
|
|
struct rt711_sdca_priv *rt711 = dev_get_drvdata(&slave->dev);
|
|
|
|
if (rt711 && rt711->hw_init) {
|
|
cancel_delayed_work_sync(&rt711->jack_detect_work);
|
|
cancel_delayed_work_sync(&rt711->jack_btn_check_work);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdw_device_id rt711_sdca_id[] = {
|
|
SDW_SLAVE_ENTRY_EXT(0x025d, 0x711, 0x3, 0x1, 0),
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(sdw, rt711_sdca_id);
|
|
|
|
static int __maybe_unused rt711_sdca_dev_suspend(struct device *dev)
|
|
{
|
|
struct rt711_sdca_priv *rt711 = dev_get_drvdata(dev);
|
|
|
|
if (!rt711->hw_init)
|
|
return 0;
|
|
|
|
cancel_delayed_work_sync(&rt711->jack_detect_work);
|
|
cancel_delayed_work_sync(&rt711->jack_btn_check_work);
|
|
|
|
regcache_cache_only(rt711->regmap, true);
|
|
regcache_cache_only(rt711->mbq_regmap, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused rt711_sdca_dev_system_suspend(struct device *dev)
|
|
{
|
|
struct rt711_sdca_priv *rt711_sdca = dev_get_drvdata(dev);
|
|
struct sdw_slave *slave = dev_to_sdw_dev(dev);
|
|
int ret1, ret2;
|
|
|
|
if (!rt711_sdca->hw_init)
|
|
return 0;
|
|
|
|
/*
|
|
* prevent new interrupts from being handled after the
|
|
* deferred work completes and before the parent disables
|
|
* interrupts on the link
|
|
*/
|
|
mutex_lock(&rt711_sdca->disable_irq_lock);
|
|
rt711_sdca->disable_irq = true;
|
|
ret1 = sdw_update_no_pm(slave, SDW_SCP_SDCA_INTMASK1,
|
|
SDW_SCP_SDCA_INTMASK_SDCA_0, 0);
|
|
ret2 = sdw_update_no_pm(slave, SDW_SCP_SDCA_INTMASK2,
|
|
SDW_SCP_SDCA_INTMASK_SDCA_8, 0);
|
|
mutex_unlock(&rt711_sdca->disable_irq_lock);
|
|
|
|
if (ret1 < 0 || ret2 < 0) {
|
|
/* log but don't prevent suspend from happening */
|
|
dev_dbg(&slave->dev, "%s: could not disable SDCA interrupts\n:", __func__);
|
|
}
|
|
|
|
return rt711_sdca_dev_suspend(dev);
|
|
}
|
|
|
|
#define RT711_PROBE_TIMEOUT 5000
|
|
|
|
static int __maybe_unused rt711_sdca_dev_resume(struct device *dev)
|
|
{
|
|
struct sdw_slave *slave = dev_to_sdw_dev(dev);
|
|
struct rt711_sdca_priv *rt711 = dev_get_drvdata(dev);
|
|
unsigned long time;
|
|
|
|
if (!rt711->first_hw_init)
|
|
return 0;
|
|
|
|
if (!slave->unattach_request)
|
|
goto regmap_sync;
|
|
|
|
time = wait_for_completion_timeout(&slave->initialization_complete,
|
|
msecs_to_jiffies(RT711_PROBE_TIMEOUT));
|
|
if (!time) {
|
|
dev_err(&slave->dev, "Initialization not complete, timed out\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
regmap_sync:
|
|
slave->unattach_request = 0;
|
|
regcache_cache_only(rt711->regmap, false);
|
|
regcache_sync(rt711->regmap);
|
|
regcache_cache_only(rt711->mbq_regmap, false);
|
|
regcache_sync(rt711->mbq_regmap);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops rt711_sdca_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(rt711_sdca_dev_system_suspend, rt711_sdca_dev_resume)
|
|
SET_RUNTIME_PM_OPS(rt711_sdca_dev_suspend, rt711_sdca_dev_resume, NULL)
|
|
};
|
|
|
|
static struct sdw_driver rt711_sdca_sdw_driver = {
|
|
.driver = {
|
|
.name = "rt711-sdca",
|
|
.owner = THIS_MODULE,
|
|
.pm = &rt711_sdca_pm,
|
|
},
|
|
.probe = rt711_sdca_sdw_probe,
|
|
.remove = rt711_sdca_sdw_remove,
|
|
.ops = &rt711_sdca_slave_ops,
|
|
.id_table = rt711_sdca_id,
|
|
};
|
|
module_sdw_driver(rt711_sdca_sdw_driver);
|
|
|
|
MODULE_DESCRIPTION("ASoC RT711 SDCA SDW driver");
|
|
MODULE_AUTHOR("Shuming Fan <shumingf@realtek.com>");
|
|
MODULE_LICENSE("GPL");
|