Andreas Fenkart b7a5646fa5 ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin ... board-rx51 has no card detect pin in the mmc slot, but can detect that the (cell-phone) cover has been removed and the card is accessible. The semantics between cover/card detect differ, the gpio on the slot informs you after the card has been removed, cover removal does not necessarily mean that the card has been removed. This means different code paths are necessary. To complete this we also want different fields in the platform data for cover and card detect. This separation is not pushed all the way down into struct omap2_hsmmc_info which is used to initialize the platform data. If we did that we had to go over all board files and set the new gpio_cod pin to -EINVAL. If we forget one board or some out-of-tree archicture forgets that the default '0' is used which is a valid pin number. Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2015-03-27 12:19:37 +01:00
..
ad5449.h	iio:dac: Add support for the ad5449	2012-10-19 18:46:51 +01:00
ad5755.h
ad7266.h
ad7291.h	staging:iio:ad7291: Move out of staging	2014-07-08 21:17:30 +01:00
ad7298.h	staging:iio: Move the ad7298 driver out of staging	2012-11-19 22:22:15 +00:00
ad7303.h	iio:dac: Add support for the AD7303	2013-06-11 20:25:58 +01:00
ad7791.h
ad7793.h	staging:iio: Move ad7793 driver out of staging	2012-11-30 12:57:08 +00:00
ad7887.h	staging:iio: Move the ad7887 driver out of staging	2012-11-05 20:39:54 +00:00
adau17x1.h	ASoC: Add ADAU1381/ADAU1781 audio CODEC support	2014-05-27 20:54:51 +01:00
adau1977.h	ASoC: Add ADAU1977 CODEC driver	2014-02-19 13:36:15 +09:00
ads7828.h	hwmon: (ads7828) driver cleanup	2012-12-05 10:55:54 -08:00
arm-ux500-pm.h	ARM: ux500: move PM-related PRCMU functions to machine	2013-04-08 13:57:53 +02:00
asoc-imx-ssi.h	ARM: imx: remove header file mach/irqs.h	2012-10-15 10:05:43 +08:00
asoc-kirkwood.h
asoc-mx27vis.h
asoc-palm27x.h
asoc-s3c24xx_simtec.h	ASoC: s3c24xx: Remove invalid file reference	2014-02-25 21:29:31 +09:00
asoc-s3c.h	ASoC: Samsung: Add quirk for internal DMA	2014-11-07 10:38:17 +00:00
asoc-ti-mcbsp.h	ASoC: mcbsp: Trivial cleanup in asoc-ti-mcbsp.h	2013-12-30 11:50:16 +00:00
asoc-ux500-msp.h	ARM: ux500: Don't use enums for MSP IDs - for easy DT conversion	2014-01-07 15:36:09 +00:00
at24.h	misc: (at24) move header to linux/platform_data/	2013-09-30 06:02:34 +02:00
at91_adc.h	iio: adc: at91_adc: Add support for touchscreens without TSMR	2014-05-07 18:28:40 +02:00
ata-pxa.h
ata-samsung_cf.h	ata: pata_samsung_cf: removes s5pc100 related ata codes	2014-06-30 10:48:08 -04:00
atmel.h	TTY/Serial driver patches for 3.16-rc1	2014-06-03 09:01:02 -07:00
bcmgenet.h	net: bcmgenet: enable driver to work without a device tree	2014-12-08 20:26:59 -05:00
bd6107.h	backlight: Add ROHM BD6107 backlight driver	2013-07-16 13:01:19 +09:00
bfin_rotary.h	Input: bfin_rotary - move pin lists into into platform data	2015-02-15 16:06:27 -08:00
brcmfmac-sdio.h	brcmfmac: abstract tx packet processing functions	2013-08-15 16:07:55 -04:00
bt-nokia-h4p.h	staging/bluetooth: Add hci_h4p driver	2014-02-07 10:13:53 -08:00
camera-mx2.h
camera-mx3.h	[media] V4L2: mx3_camera: add support for asynchronous subdevice registration	2013-08-18 09:06:37 -03:00
camera-pxa.h
camera-rcar.h	[media] V4L2: soc_camera: Renesas R-Car VIN driver	2013-08-18 09:01:10 -03:00
clk-integrator.h	ARM: integrator: switch to fetch clocks from device tree	2014-02-13 11:20:42 +01:00
clk-lpss.h	ACPI / LPSS: register clock device for Lynxpoint DMA properly	2013-05-14 10:23:58 +05:30
clk-realview.h
clk-u300.h
clk-ux500.h	clk: ux500: Copy u8500_clk_init() ready for DT enablement	2013-09-26 11:05:26 +02:00
coda.h	media: coda: use genalloc API	2013-04-29 18:28:13 -07:00
cpuidle-exynos.h	cpuidle: exynos: add coupled cpuidle support for exynos4210	2015-01-30 08:39:15 +09:00
crypto-atmel.h	ARM: AT91SAM9G45: same platform data structure for all crypto peripherals	2013-03-10 16:46:41 +08:00
crypto-ux500.h	ARM: plat-nomadik: move DMA40 header to <linux/platform_data>	2012-11-05 09:55:32 +01:00
cyttsp4.h	Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices	2013-06-30 21:24:21 -07:00
davinci_asp.h	ASoC: davinci-mcasp: Rename platform data struct	2014-02-03 18:26:59 +00:00
db8500_thermal.h	Thermal: Add ST-Ericsson DB8500 thermal driver.	2012-11-15 20:50:34 +08:00
dma-atmel.h	dmaengine: at_hdmac: extend hardware handshaking interface identification	2013-07-05 11:40:29 +05:30
dma-coh901318.h	dma: coh901318: create a proper platform data file	2013-01-07 17:35:57 +01:00
dma-dw.h	dmaengine: dw: define DW_DMA_MAX_NR_MASTERS	2015-02-04 22:39:44 -08:00
dma-ep93xx.h
dma-imx-sdma.h	dma: imx-sdma: Add sdma firmware version 2 support	2013-12-16 09:18:47 +05:30
dma-imx.h	dmaengine: imx-sdma: Add a new DMATYPE for SAI	2014-11-17 13:50:43 +05:30
dma-mmp_tdma.h	dma: mmp_tdma: Fix build for ARM64	2015-02-03 17:47:35 -08:00
dma-mv_xor.h	dma: mv_xor: Cleanup in dma-mv_xor.h header	2014-01-13 13:30:31 +05:30
dma-rcar-audmapp.h	shdma: add R-Car Audio DMAC peri peri driver	2014-03-29 19:38:09 +05:30
dma-rcar-hpbdma.h	dma: add driver for R-Car HPB-DMAC	2013-09-02 17:35:55 +05:30
dma-s3c24xx.h	ARM: S3C24XX: add dma pdata for s3c2410, s3c2440 and s3c2442	2013-10-21 05:32:48 +09:00
dma-ste-dma40.h	dmaengine: ste_dma40: Allow memcpy channels to be configured from DT	2013-06-04 11:12:11 +02:00
dmtimer-omap.h	ARM: OMAP: Add platform data header for DMTIMERs	2012-11-16 10:35:08 -06:00
drv260x-pdata.h	Input: drv260x - add TI drv260x haptics driver	2014-08-19 22:19:28 -07:00
dwc3-omap.h	usb: dwc3: omap: remove platform data associated with dwc3-omap	2013-03-18 11:16:38 +02:00
edma.h	ARM: edma: Add edma_assign_channel_eventq() to move channel to a give queue	2014-07-28 17:03:13 +05:30
efm32-spi.h	spi: new controller driver for efm32 SoCs	2013-08-09 17:32:57 +01:00
efm32-uart.h
ehci-sh.h
elm.h	nand: omap2: Remove horrible ifdefs to fix module probe	2014-09-22 11:37:51 -07:00
emif_plat.h	memory: emif: Handle devices which are not rated for >85C	2013-03-25 13:18:12 -07:00
eth-netx.h	net: Cleanup in eth-netx.h	2014-01-02 03:30:35 -05:00
fsa9480.h
g762.h	Add support for GMT G762/G763 PWM fan controllers	2013-06-27 10:31:42 -07:00
gpio_backlight.h	backlight: Add GPIO-based backlight driver	2013-07-16 13:01:05 +09:00
gpio-davinci.h	gpio: remove obsolete tnetv107x driver	2014-03-05 10:44:44 +08:00
gpio-dwapb.h	GPIO: gpio-dwapb: Enable platform driver binding to MFD driver	2014-09-23 17:51:37 +02:00
gpio-em.h	gpio: em: Add pinctrl support	2013-07-21 17:24:41 +02:00
gpio-lpc32xx.h	ARM: lpc32xx: move custom GPIO header	2013-12-03 11:26:06 +01:00
gpio-omap.h	ARM: OMAP: Remove NEED_MACH_GPIO_H	2012-11-02 12:00:36 -07:00
gpio-rcar.h	gpio-rcar: Add RCAR_GP_PIN macro	2013-06-04 21:03:56 +09:00
gpio-ts5500.h	gpio: add TS-5500 DIO blocks support	2012-12-10 11:23:25 +01:00
hsmmc-omap.h	ARM: OMAP2: HSMMC: explicit fields to declare cover/card detect pin	2015-03-27 12:19:37 +01:00
hwmon-s3c.h	hwmon: (s3c) Trivial cleanup in hwmon-s3c.h	2014-01-14 21:36:52 -08:00
i2c-cbus-gpio.h	i2c: i2c-cbus-gpio: introduce driver	2012-11-19 09:57:16 +01:00
i2c-davinci.h
i2c-designware.h	i2c: designware: add support of platform data to set I2C mode	2014-09-29 22:41:17 +02:00
i2c-imx.h
i2c-nuc900.h
i2c-s3c2410.h	i2c: s3c2410: Trivial cleanup in header file	2014-03-10 17:32:28 +01:00
ina2xx.h
intel-mid_wdt.h	watchdog: add Intel MID watchdog driver support	2014-06-10 21:48:16 +02:00
invensense_mpu6050.h	Invensense MPU6050 Device Driver.	2013-02-10 17:42:43 +00:00
iommu-omap.h	iommu/omap: Remove platform data da_start and da_end fields	2014-07-29 12:39:56 +02:00
irda-pxaficp.h
irda-sa11x0.h	arm: sa1100: move irda header to linux/platform_data	2014-12-30 18:44:07 -05:00
irq-renesas-intc-irqpin.h	irqchip: intc-irqpin: GPL header for platform data	2013-03-18 21:26:06 +09:00
irq-renesas-irqc.h	irqchip: Renesas IRQC driver	2013-03-18 21:26:06 +09:00
isl9305.h	regulator: isl9305: Add Intersil ISL9305/H driver	2014-09-06 12:43:05 +01:00
keyboard-pxa930_rotary.h
keyboard-spear.h
keypad-ep93xx.h	Input: keypad-ep93xx - cleanup header file	2013-12-27 17:20:21 -08:00
keypad-nomadik-ske.h
keypad-omap.h	Input: keypad-omap - cleanup header file	2013-12-27 17:20:22 -08:00
keypad-pxa27x.h	Input: pxa27x-keypad - use matrix_keymap for matrix keys	2013-06-18 22:56:51 -07:00
keypad-w90p910.h
keyscan-davinci.h
lcd-mipid.h
leds-kirkwood-netxbig.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-kirkwood-ns2.h	leds: kirkwood: Cleanup in header files	2014-01-27 17:28:51 -08:00
leds-lm355x.h
leds-lm3642.h
leds-lp55xx.h	leds: lp55xx: handle enable pin in driver	2013-10-25 10:13:25 -07:00
leds-omap.h	ARM: OMAP: Move plat/led.h to include/linux/platform_data	2012-10-17 12:03:18 -07:00
leds-pca963x.h	leds-pca9633: Rename to leds-pca963x	2013-08-26 17:22:14 -07:00
leds-s3c24xx.h	leds: leds-s3c24xx: Trivial cleanup in header file	2014-02-27 09:57:11 -08:00
lm3630a_bl.h	backlight: lm3630: apply chip revision	2013-11-13 12:09:15 +09:00
lm3639_bl.h
lp855x.h	backlight: lp855x: Add supply regulator to lp855x	2014-12-09 09:24:45 +00:00
lp8727.h
lp8755.h	regulator: lp8755: new driver for LP8755	2012-12-24 16:32:34 +00:00
lv5207lp.h	backlight: Add Sanyo LV5207LP backlight driver	2013-07-16 13:01:10 +09:00
macb.h	net/at91_ether: add pdata flag for reverse Eth addr	2012-10-23 02:40:10 -04:00
mailbox-omap.h	ARM: OMAP2+: add user and fifo info to mailbox platform data	2013-06-11 11:41:30 -05:00
max197.h	hwmon: (max197) add include guard	2014-01-14 21:36:53 -08:00
max3421-hcd.h	usb: host: max3421-hcd: Allow platform-data to specify Vbus polarity	2014-05-29 11:19:30 -07:00
max6697.h	hwmon: Driver for Maxim MAX6697 and compatibles	2013-02-06 09:57:56 -08:00
mfd-mcp-sa11x0.h	mfd: Cleanup mfd-mcp-sa11x0.h header	2014-01-21 08:28:59 +00:00
microread.h	NFC: Initial support for Inside Secure microread	2013-02-03 20:37:42 +01:00
mmc-atmel-mci.h	mmc: atmel-mci: move mach header to platform_data	2014-11-10 12:40:37 +01:00
mmc-davinci.h	ARM: davinci: mmc: derive version information from device name	2013-04-03 09:42:16 +05:30
mmc-esdhc-imx.h	mmc: sdhci-esdhc-imx: add delay line setting support	2013-10-21 15:58:13 -04:00
mmc-msm_sdcc.h	mmc: msm: Cleanup mmc-msm_sdcc.h header	2014-02-25 15:43:15 -05:00
mmc-mvsdio.h	mmc: mvsdio: Cleanup mmc-mvsdio.h header	2014-02-25 15:43:23 -05:00
mmc-mxcmmc.h
mmc-omap.h	mmc: omap_hsmmc: remove prepare/complete system suspend support.	2015-01-19 09:56:08 +01:00
mmc-pxamci.h	ARM: pxa: propagate errors from regulator_enable() to pxamci	2013-07-23 12:15:15 -07:00
mmc-s3cmci.h
mmc-sdhci-s3c.h	mmc: sdhci-s3c: remove platform dependencies	2013-04-19 13:51:23 +02:00
mmp_audio.h
mmp_dma.h
mouse-pxa930_trkball.h
msm_serial_hs.h
mtd-davinci-aemif.h	ARM: davinci: aemif: get rid of davinci-nand driver dependency on aemif	2014-02-23 20:33:18 +05:30
mtd-davinci.h
mtd-mxc_nand.h
mtd-nand-omap2.h	nand: omap2: Add support for flash-based bad block table	2014-09-17 01:02:48 -07:00
mtd-nand-pxa3xx.h	mtd: nand: pxa3xx: Use ECC strength and step size devicetree binding	2014-05-21 12:55:09 -07:00
mtd-nand-s3c2410.h	mtd: nand: s3c2410: Trivial cleanup in header file	2014-03-10 22:42:26 -07:00
mtd-onenand-omap2.h	mtd: omap2: Cleanup header files	2014-01-11 11:39:18 -08:00
mtd-orion_nand.h	mtd: orion: Cleanup mtd-orion_nand.h header	2014-01-11 11:39:23 -08:00
mv_usb.h	usb: mv_usb: remove clock name from pdata	2013-04-02 11:42:47 +03:00
net-cw1200.h	cw1200: rename the cw1200 platform definition header	2013-06-03 15:54:56 -04:00
ntc_thermistor.h	hwmon: (ntc_thermistor) Support B57330V2103 from EPCOS	2014-08-04 07:01:35 -07:00
omap1_bl.h
omap_drm.h	staging: drm/omap: add support for ARCH_MULTIPLATFORM	2012-10-30 11:10:00 -07:00
omap-twl4030.h	ASoC: omap-twl4030: Update the header file to support more boards	2012-12-07 12:54:31 +09:00
omap-wd-timer.h	ARM: OMAP2+: WDT: move init; add read_reset_sources pdata function pointer	2012-10-29 20:49:44 -06:00
pca953x.h	gpio: (gpio-pca953x) move header to linux/platform_data/	2013-08-29 12:33:52 -07:00
pcmcia-pxa2xx_viper.h
pinctrl-adi2.h	pinctrl: ADI PIN control driver for the GPIO controller on bf54x and bf60x.	2013-09-19 14:37:27 +02:00
pinctrl-single.h	pinctrl: single: Add support for auxdata	2013-10-10 15:30:47 -07:00
pn544.h	nfc: Fix FSF address in file headers	2013-12-11 10:56:21 -05:00
pxa2xx_udc.h	ARM: move udc_pxa2xx.h to linux/platform_data	2012-11-16 11:35:30 +00:00
pxa_sdhci.h	mmc: sdhci-pxav3: Move private driver data to driver source	2014-11-10 12:40:31 +01:00
regulator-haptic.h	Input: add regulator haptic driver	2014-12-21 18:59:20 -08:00
remoteproc-omap.h	remoteproc/omap: fix a sparse warning	2013-07-01 15:30:51 +03:00
s3c-hsotg.h	ARM defconfigs: add missing inclusions of linux/platform_device.h	2013-02-14 15:14:32 -08:00
s3c-hsudc.h
sa11x0-serial.h	ARM: move serial_sa1100.h header file to linux/platform_data	2012-11-16 11:35:29 +00:00
sc18is602.h
serial-imx.h	serial: imx: Remove init() and exit() platform callbacks	2014-02-28 16:36:45 -08:00
serial-omap.h	ARM: OMAP: serial: remove last vestige of DTR_gpio support.	2014-11-10 09:06:44 -08:00
serial-sccnxp.h	Revert "serial: sccnxp: Add DT support"	2013-08-02 15:25:19 +08:00
sh_ipmmu.h	iommu/shmobile: Add iommu driver for Renesas IPMMU modules	2013-02-06 10:57:25 +01:00
shmob_drm.h
sht15.h	hwmon: (sht15) add include guard	2014-01-14 21:36:53 -08:00
shtc1.h	hwmon: add support for Sensirion SHTC1 sensor	2014-06-12 08:36:48 -07:00
si5351.h	clk: si5351: remove variant from platform_data	2014-01-27 11:20:22 -08:00
simplefb.h	fbdev changes for 3.12:	2013-09-05 09:49:32 -07:00
spi-clps711x.h	spi/clps711x: New SPI master driver	2012-12-05 23:14:38 +00:00
spi-davinci.h	ARM: davinci: move private EDMA API to arm/common	2013-06-18 10:52:03 +05:30
spi-ep93xx.h
spi-imx.h
spi-nuc900.h	spi: nuc900: Cleanup spi-nuc900.h header	2013-12-30 12:46:20 +00:00
spi-omap2-mcspi.h	spi: spi-omap2-mcspi.c: Toggle CS after each word	2013-01-26 17:00:04 +08:00
spi-s3c64xx.h	spi/s3c64xx: Trivial cleanup in header file	2014-02-16 09:59:13 +08:00
ssm2518.h	ASoC: Add ssm2518 support	2013-05-25 10:33:30 -04:00
st21nfca.h	NFC: st21nfca: Adding support for secure element	2015-01-28 00:03:36 +01:00
st21nfcb.h	NFC: st21nfcb: Fix copy/paste error in comment	2015-01-26 23:14:34 +01:00
st1232_pdata.h	Input: st1232 - add reset pin handling	2013-04-15 10:00:44 -07:00
st_sensors_pdata.h	iio: Added ST-sensors platform data to select the DRDY interrupt pin	2013-08-03 18:40:28 +01:00
syscon.h	mfd: syscon: Add platform data with a regmap config name	2014-05-15 17:02:19 +01:00
touchscreen-s3c2410.h	Input: s3c2410 - trivial cleanup in header file	2014-02-14 00:09:43 -08:00
tpm_stm_st33.h	tpm/tpm_i2c_stm_st33: Change tpm_i2c_stm_st33.h to tpm_stm_st33.h	2015-01-17 15:04:04 +01:00
tsl2563.h	iio:light:tsl2563 move out of staging	2013-01-27 17:37:24 +00:00
uio_dmem_genirq.h	Add new uio device for dynamic memory allocation	2012-10-24 15:39:08 -07:00
uio_pruss.h	uio: uio_pruss: replace private SRAM API with genalloc	2012-10-27 16:28:32 +05:30
usb3503.h	usb: misc: usb3503: Add to select the ports to disable	2013-05-30 21:32:52 +09:00
usb-davinci.h
usb-ehci-mxc.h	ARM: imx: move EHCI platform defines out of platform_data header	2014-07-18 16:10:04 +08:00
usb-ehci-orion.h	usb: ehci: Cleanup usb-ehci-orion.h header	2014-01-03 12:37:57 -08:00
usb-musb-ux500.h	usb: musb: ux500: move channel number knowledge into the driver	2013-06-04 11:12:02 +02:00
usb-mx2.h
usb-ohci-pxa27x.h
usb-ohci-s3c2410.h
usb-omap1.h	usb: omap1: add extcon to platform data	2013-12-06 14:36:37 -06:00
usb-omap.h	mfd: omap-usb-host: override number of ports from platform data	2013-02-13 13:22:49 +02:00
usb-pxa3xx-ulpi.h
usb-rcar-gen2-phy.h	usb: phy: Add RCAR Gen2 USB phy	2013-10-10 11:59:48 -05:00
usb-rcar-phy.h	phy-rcar-usb: add R8A7778 support	2013-06-11 16:11:16 +09:00
usb-s3c2410_udc.h
ux500_wdt.h	watchdog: Add support for ux500_wdt watchdog	2013-02-14 00:22:53 +01:00
video_s3c.h	video/s3c: move platform_data out of arch/arm	2013-04-11 14:49:20 +03:00
video-clcd-versatile.h	video: fix up versatile CLCD helper move	2014-07-23 17:41:00 +02:00
video-ep93xx.h	video: ep93xx: Cleanup video-ep93xx.h header	2014-01-17 10:57:41 +02:00
video-imxfb.h	video: imxfb: Remove unused fields from platform data structure	2014-02-28 12:35:22 +02:00
video-msm_fb.h	video: msm: Cleanup video-msm_fb.h header	2014-01-17 10:57:42 +02:00
video-mx3fb.h
video-nuc900fb.h
video-pxafb.h	video: pxa: Cleanup video-pxafb.h header	2014-01-17 10:57:42 +02:00
voltage-omap.h
wiznet.h
zforce_ts.h	Input: add driver for Neonode zForce based touchscreens	2013-10-31 08:46:08 -07:00