mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
7053acbd78
This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
372 lines
8.1 KiB
C
372 lines
8.1 KiB
C
/*
|
|
* OHCI HCD (Host Controller Driver) for USB.
|
|
*
|
|
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
|
|
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
|
|
* (C) Copyright 2002 Hewlett-Packard Company
|
|
*
|
|
* Bus Glue for pxa27x
|
|
*
|
|
* Written by Christopher Hoover <ch@hpl.hp.com>
|
|
* Based on fragments of previous driver by Russell King et al.
|
|
*
|
|
* Modified for LH7A404 from ohci-sa1111.c
|
|
* by Durgesh Pattamatta <pattamattad@sharpsec.com>
|
|
*
|
|
* Modified for pxa27x from ohci-lh7a404.c
|
|
* by Nick Bane <nick@cecomputing.co.uk> 26-8-2004
|
|
*
|
|
* This file is licenced under the GPL.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/ohci.h>
|
|
|
|
#define PXA_UHC_MAX_PORTNUM 3
|
|
|
|
#define UHCRHPS(x) __REG2( 0x4C000050, (x)<<2 )
|
|
|
|
/*
|
|
PMM_NPS_MODE -- PMM Non-power switching mode
|
|
Ports are powered continuously.
|
|
|
|
PMM_GLOBAL_MODE -- PMM global switching mode
|
|
All ports are powered at the same time.
|
|
|
|
PMM_PERPORT_MODE -- PMM per port switching mode
|
|
Ports are powered individually.
|
|
*/
|
|
static int pxa27x_ohci_select_pmm( int mode )
|
|
{
|
|
switch ( mode ) {
|
|
case PMM_NPS_MODE:
|
|
UHCRHDA |= RH_A_NPS;
|
|
break;
|
|
case PMM_GLOBAL_MODE:
|
|
UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
|
|
break;
|
|
case PMM_PERPORT_MODE:
|
|
UHCRHDA &= ~(RH_A_NPS);
|
|
UHCRHDA |= RH_A_PSM;
|
|
|
|
/* Set port power control mask bits, only 3 ports. */
|
|
UHCRHDB |= (0x7<<17);
|
|
break;
|
|
default:
|
|
printk( KERN_ERR
|
|
"Invalid mode %d, set to non-power switch mode.\n",
|
|
mode );
|
|
|
|
UHCRHDA |= RH_A_NPS;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
extern int usb_disabled(void);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int pxa27x_start_hc(struct device *dev)
|
|
{
|
|
int retval = 0;
|
|
struct pxaohci_platform_data *inf;
|
|
|
|
inf = dev->platform_data;
|
|
|
|
pxa_set_cken(CKEN_USBHOST, 1);
|
|
|
|
UHCHR |= UHCHR_FHR;
|
|
udelay(11);
|
|
UHCHR &= ~UHCHR_FHR;
|
|
|
|
UHCHR |= UHCHR_FSBIR;
|
|
while (UHCHR & UHCHR_FSBIR)
|
|
cpu_relax();
|
|
|
|
if (inf->init)
|
|
retval = inf->init(dev);
|
|
|
|
if (retval < 0)
|
|
return retval;
|
|
|
|
UHCHR &= ~UHCHR_SSE;
|
|
|
|
UHCHIE = (UHCHIE_UPRIE | UHCHIE_RWIE);
|
|
|
|
/* Clear any OTG Pin Hold */
|
|
if (PSSR & PSSR_OTGPH)
|
|
PSSR |= PSSR_OTGPH;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxa27x_stop_hc(struct device *dev)
|
|
{
|
|
struct pxaohci_platform_data *inf;
|
|
|
|
inf = dev->platform_data;
|
|
|
|
if (inf->exit)
|
|
inf->exit(dev);
|
|
|
|
UHCHR |= UHCHR_FHR;
|
|
udelay(11);
|
|
UHCHR &= ~UHCHR_FHR;
|
|
|
|
UHCCOMS |= 1;
|
|
udelay(10);
|
|
|
|
pxa_set_cken(CKEN_USBHOST, 0);
|
|
}
|
|
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* configure so an HC device and id are always provided */
|
|
/* always called with process context; sleeping is OK */
|
|
|
|
|
|
/**
|
|
* usb_hcd_pxa27x_probe - initialize pxa27x-based HCDs
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller, and
|
|
* then invokes the start() method for the HCD associated with it
|
|
* through the hotplug entry's driver_data.
|
|
*
|
|
*/
|
|
int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device *pdev)
|
|
{
|
|
int retval;
|
|
struct usb_hcd *hcd;
|
|
struct pxaohci_platform_data *inf;
|
|
|
|
inf = pdev->dev.platform_data;
|
|
|
|
if (!inf)
|
|
return -ENODEV;
|
|
|
|
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
|
|
pr_debug ("resource[1] is not IORESOURCE_IRQ");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
hcd = usb_create_hcd (driver, &pdev->dev, "pxa27x");
|
|
if (!hcd)
|
|
return -ENOMEM;
|
|
hcd->rsrc_start = pdev->resource[0].start;
|
|
hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
|
|
|
|
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
|
|
pr_debug("request_mem_region failed");
|
|
retval = -EBUSY;
|
|
goto err1;
|
|
}
|
|
|
|
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
|
|
if (!hcd->regs) {
|
|
pr_debug("ioremap failed");
|
|
retval = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
if ((retval = pxa27x_start_hc(&pdev->dev)) < 0) {
|
|
pr_debug("pxa27x_start_hc failed");
|
|
goto err3;
|
|
}
|
|
|
|
/* Select Power Management Mode */
|
|
pxa27x_ohci_select_pmm(inf->port_mode);
|
|
|
|
if (inf->power_budget)
|
|
hcd->power_budget = inf->power_budget;
|
|
|
|
ohci_hcd_init(hcd_to_ohci(hcd));
|
|
|
|
retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
|
|
if (retval == 0)
|
|
return retval;
|
|
|
|
pxa27x_stop_hc(&pdev->dev);
|
|
err3:
|
|
iounmap(hcd->regs);
|
|
err2:
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
err1:
|
|
usb_put_hcd(hcd);
|
|
return retval;
|
|
}
|
|
|
|
|
|
/* may be called without controller electrically present */
|
|
/* may be called with controller, bus, and devices active */
|
|
|
|
/**
|
|
* usb_hcd_pxa27x_remove - shutdown processing for pxa27x-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_pxa27x_probe(), first invoking
|
|
* the HCD's stop() method. It is always called from a thread
|
|
* context, normally "rmmod", "apmd", or something similar.
|
|
*
|
|
*/
|
|
void usb_hcd_pxa27x_remove (struct usb_hcd *hcd, struct platform_device *pdev)
|
|
{
|
|
usb_remove_hcd(hcd);
|
|
pxa27x_stop_hc(&pdev->dev);
|
|
iounmap(hcd->regs);
|
|
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
|
|
usb_put_hcd(hcd);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int __devinit
|
|
ohci_pxa27x_start (struct usb_hcd *hcd)
|
|
{
|
|
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
|
|
int ret;
|
|
|
|
ohci_dbg (ohci, "ohci_pxa27x_start, ohci:%p", ohci);
|
|
|
|
/* The value of NDP in roothub_a is incorrect on this hardware */
|
|
ohci->num_ports = 3;
|
|
|
|
if ((ret = ohci_init(ohci)) < 0)
|
|
return ret;
|
|
|
|
if ((ret = ohci_run (ohci)) < 0) {
|
|
err ("can't start %s", hcd->self.bus_name);
|
|
ohci_stop (hcd);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static const struct hc_driver ohci_pxa27x_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "PXA27x OHCI",
|
|
.hcd_priv_size = sizeof(struct ohci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = ohci_irq,
|
|
.flags = HCD_USB11 | HCD_MEMORY,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.start = ohci_pxa27x_start,
|
|
.stop = ohci_stop,
|
|
.shutdown = ohci_shutdown,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ohci_urb_enqueue,
|
|
.urb_dequeue = ohci_urb_dequeue,
|
|
.endpoint_disable = ohci_endpoint_disable,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ohci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ohci_hub_status_data,
|
|
.hub_control = ohci_hub_control,
|
|
.hub_irq_enable = ohci_rhsc_enable,
|
|
#ifdef CONFIG_PM
|
|
.bus_suspend = ohci_bus_suspend,
|
|
.bus_resume = ohci_bus_resume,
|
|
#endif
|
|
.start_port_reset = ohci_start_port_reset,
|
|
};
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static int ohci_hcd_pxa27x_drv_probe(struct platform_device *pdev)
|
|
{
|
|
pr_debug ("In ohci_hcd_pxa27x_drv_probe");
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
return usb_hcd_pxa27x_probe(&ohci_pxa27x_hc_driver, pdev);
|
|
}
|
|
|
|
static int ohci_hcd_pxa27x_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
usb_hcd_pxa27x_remove(hcd, pdev);
|
|
platform_set_drvdata(pdev, NULL);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
|
|
|
|
if (time_before(jiffies, ohci->next_statechange))
|
|
msleep(5);
|
|
ohci->next_statechange = jiffies;
|
|
|
|
pxa27x_stop_hc(&pdev->dev);
|
|
hcd->state = HC_STATE_SUSPENDED;
|
|
pdev->dev.power.power_state = PMSG_SUSPEND;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
|
|
{
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
|
|
int status;
|
|
|
|
if (time_before(jiffies, ohci->next_statechange))
|
|
msleep(5);
|
|
ohci->next_statechange = jiffies;
|
|
|
|
if ((status = pxa27x_start_hc(&pdev->dev)) < 0)
|
|
return status;
|
|
|
|
pdev->dev.power.power_state = PMSG_ON;
|
|
usb_hcd_resume_root_hub(hcd);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
|
|
static struct platform_driver ohci_hcd_pxa27x_driver = {
|
|
.probe = ohci_hcd_pxa27x_drv_probe,
|
|
.remove = ohci_hcd_pxa27x_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ohci_hcd_pxa27x_drv_suspend,
|
|
.resume = ohci_hcd_pxa27x_drv_resume,
|
|
#endif
|
|
.driver = {
|
|
.name = "pxa27x-ohci",
|
|
},
|
|
};
|
|
|