mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 13:43:55 +08:00
a0d2642e92
Intel LPSS SPI is pretty much the same as the PXA27xx SPI except that it has few additional features over the original: o FIFO depth is 256 entries o RX FIFO has one watermark o TX FIFO has two watermarks, low and high o chip select can be controlled by writing to a register The new FIFO registers follow immediately the PXA27xx registers but then there are some additional LPSS private registers at offset 1k or 2k from the base address. For these private registers we add new accessors that take advantage of drv_data->lpss_base once it is resolved. We add a new type LPSS_SSP that can be used to distinguish the LPSS devices from others. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Lu Cao <lucao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
65 lines
1.7 KiB
C
65 lines
1.7 KiB
C
/*
|
|
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
#ifndef __linux_pxa2xx_spi_h
|
|
#define __linux_pxa2xx_spi_h
|
|
|
|
#include <linux/pxa2xx_ssp.h>
|
|
|
|
#define PXA2XX_CS_ASSERT (0x01)
|
|
#define PXA2XX_CS_DEASSERT (0x02)
|
|
|
|
/* device.platform_data for SSP controller devices */
|
|
struct pxa2xx_spi_master {
|
|
u32 clock_enable;
|
|
u16 num_chipselect;
|
|
u8 enable_dma;
|
|
|
|
/* DMA engine specific config */
|
|
int rx_chan_id;
|
|
int tx_chan_id;
|
|
int rx_slave_id;
|
|
int tx_slave_id;
|
|
|
|
/* For non-PXA arches */
|
|
struct ssp_device ssp;
|
|
};
|
|
|
|
/* spi_board_info.controller_data for SPI slave devices,
|
|
* copied to spi_device.platform_data ... mostly for dma tuning
|
|
*/
|
|
struct pxa2xx_spi_chip {
|
|
u8 tx_threshold;
|
|
u8 tx_hi_threshold;
|
|
u8 rx_threshold;
|
|
u8 dma_burst_size;
|
|
u32 timeout;
|
|
u8 enable_loopback;
|
|
int gpio_cs;
|
|
void (*cs_control)(u32 command);
|
|
};
|
|
|
|
#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
|
|
|
|
#include <linux/clk.h>
|
|
#include <mach/dma.h>
|
|
|
|
extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
|
|
|
|
#endif
|
|
#endif
|