mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
a5d28c8e64
Initialize I2C pins on boards with CPM1/CPM2 controllers and document the i2c bus in booting-without-of. The boards don't have any I2C chips connected to the I2C bus, so unless some external chips are connected to the boards, this code is just an example of setting everything else up. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
289 lines
6.7 KiB
C
289 lines
6.7 KiB
C
/*
|
|
* Platform setup for the Freescale mpc885ads board
|
|
*
|
|
* Vitaly Bordug <vbordug@ru.mvista.com>
|
|
*
|
|
* Copyright 2005 MontaVista Software Inc.
|
|
*
|
|
* Heavily modified by Scott Wood <scottwood@freescale.com>
|
|
* Copyright 2007 Freescale Semiconductor, Inc.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public License
|
|
* version 2. This program is licensed "as is" without any warranty of any
|
|
* kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/param.h>
|
|
#include <linux/string.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/fs_enet_pd.h>
|
|
#include <linux/fs_uart_pd.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <asm/delay.h>
|
|
#include <asm/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/page.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/system.h>
|
|
#include <asm/time.h>
|
|
#include <asm/mpc8xx.h>
|
|
#include <asm/8xx_immap.h>
|
|
#include <asm/cpm1.h>
|
|
#include <asm/fs_pd.h>
|
|
#include <asm/udbg.h>
|
|
|
|
#include "mpc885ads.h"
|
|
#include "mpc8xx.h"
|
|
|
|
static u32 __iomem *bcsr, *bcsr5;
|
|
|
|
#ifdef CONFIG_PCMCIA_M8XX
|
|
static void pcmcia_hw_setup(int slot, int enable)
|
|
{
|
|
if (enable)
|
|
clrbits32(&bcsr[1], BCSR1_PCCEN);
|
|
else
|
|
setbits32(&bcsr[1], BCSR1_PCCEN);
|
|
}
|
|
|
|
static int pcmcia_set_voltage(int slot, int vcc, int vpp)
|
|
{
|
|
u32 reg = 0;
|
|
|
|
switch (vcc) {
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
reg |= BCSR1_PCCVCC0;
|
|
break;
|
|
case 50:
|
|
reg |= BCSR1_PCCVCC1;
|
|
break;
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
switch (vpp) {
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
case 50:
|
|
if (vcc == vpp)
|
|
reg |= BCSR1_PCCVPP1;
|
|
else
|
|
return 1;
|
|
break;
|
|
case 120:
|
|
if ((vcc == 33) || (vcc == 50))
|
|
reg |= BCSR1_PCCVPP0;
|
|
else
|
|
return 1;
|
|
default:
|
|
return 1;
|
|
}
|
|
|
|
/* first, turn off all power */
|
|
clrbits32(&bcsr[1], 0x00610000);
|
|
|
|
/* enable new powersettings */
|
|
setbits32(&bcsr[1], reg);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
struct cpm_pin {
|
|
int port, pin, flags;
|
|
};
|
|
|
|
static struct cpm_pin mpc885ads_pins[] = {
|
|
/* SMC1 */
|
|
{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
|
|
{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
|
|
|
/* SMC2 */
|
|
#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
|
|
{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
|
|
#endif
|
|
|
|
/* SCC3 */
|
|
{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
|
|
{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
|
|
{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
|
|
{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
|
|
{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
|
|
{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
|
|
{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
|
|
|
|
/* MII1 */
|
|
{CPM_PORTA, 0, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 1, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 2, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 3, CPM_PIN_INPUT},
|
|
{CPM_PORTA, 4, CPM_PIN_OUTPUT},
|
|
{CPM_PORTA, 10, CPM_PIN_OUTPUT},
|
|
{CPM_PORTA, 11, CPM_PIN_OUTPUT},
|
|
{CPM_PORTB, 19, CPM_PIN_INPUT},
|
|
{CPM_PORTB, 31, CPM_PIN_INPUT},
|
|
{CPM_PORTC, 12, CPM_PIN_INPUT},
|
|
{CPM_PORTC, 13, CPM_PIN_INPUT},
|
|
{CPM_PORTE, 30, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 31, CPM_PIN_OUTPUT},
|
|
|
|
/* MII2 */
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 16, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
|
|
{CPM_PORTE, 21, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 22, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 23, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 24, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 25, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 26, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 27, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 28, CPM_PIN_OUTPUT},
|
|
{CPM_PORTE, 29, CPM_PIN_OUTPUT},
|
|
#endif
|
|
/* I2C */
|
|
{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
|
|
{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
|
|
};
|
|
|
|
static void __init init_ioports(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
|
|
struct cpm_pin *pin = &mpc885ads_pins[i];
|
|
cpm1_set_pin(pin->port, pin->pin, pin->flags);
|
|
}
|
|
|
|
cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
|
|
cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
|
|
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
|
|
cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
|
|
|
|
/* Set FEC1 and FEC2 to MII mode */
|
|
clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
|
|
}
|
|
|
|
static void __init mpc885ads_setup_arch(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
cpm_reset();
|
|
init_ioports();
|
|
|
|
np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
|
|
if (!np) {
|
|
printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
|
|
return;
|
|
}
|
|
|
|
bcsr = of_iomap(np, 0);
|
|
bcsr5 = of_iomap(np, 1);
|
|
of_node_put(np);
|
|
|
|
if (!bcsr || !bcsr5) {
|
|
printk(KERN_CRIT "Could not remap BCSR\n");
|
|
return;
|
|
}
|
|
|
|
clrbits32(&bcsr[1], BCSR1_RS232EN_1);
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
setbits32(&bcsr[1], BCSR1_RS232EN_2);
|
|
#else
|
|
clrbits32(&bcsr[1], BCSR1_RS232EN_2);
|
|
#endif
|
|
|
|
clrbits32(bcsr5, BCSR5_MII1_EN);
|
|
setbits32(bcsr5, BCSR5_MII1_RST);
|
|
udelay(1000);
|
|
clrbits32(bcsr5, BCSR5_MII1_RST);
|
|
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
|
|
clrbits32(bcsr5, BCSR5_MII2_EN);
|
|
setbits32(bcsr5, BCSR5_MII2_RST);
|
|
udelay(1000);
|
|
clrbits32(bcsr5, BCSR5_MII2_RST);
|
|
#else
|
|
setbits32(bcsr5, BCSR5_MII2_EN);
|
|
#endif
|
|
|
|
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
|
|
clrbits32(&bcsr[4], BCSR4_ETH10_RST);
|
|
udelay(1000);
|
|
setbits32(&bcsr[4], BCSR4_ETH10_RST);
|
|
|
|
setbits32(&bcsr[1], BCSR1_ETHEN);
|
|
|
|
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
|
|
#else
|
|
np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
|
|
#endif
|
|
|
|
/* The SCC3 enet registers overlap the SMC1 registers, so
|
|
* one of the two must be removed from the device tree.
|
|
*/
|
|
|
|
if (np) {
|
|
of_detach_node(np);
|
|
of_node_put(np);
|
|
}
|
|
|
|
#ifdef CONFIG_PCMCIA_M8XX
|
|
/* Set up board specific hook-ups.*/
|
|
m8xx_pcmcia_ops.hw_ctrl = pcmcia_hw_setup;
|
|
m8xx_pcmcia_ops.voltage_set = pcmcia_set_voltage;
|
|
#endif
|
|
}
|
|
|
|
static int __init mpc885ads_probe(void)
|
|
{
|
|
unsigned long root = of_get_flat_dt_root();
|
|
return of_flat_dt_is_compatible(root, "fsl,mpc885ads");
|
|
}
|
|
|
|
static struct of_device_id __initdata of_bus_ids[] = {
|
|
{ .name = "soc", },
|
|
{ .name = "cpm", },
|
|
{ .name = "localbus", },
|
|
{},
|
|
};
|
|
|
|
static int __init declare_of_platform_devices(void)
|
|
{
|
|
/* Publish the QE devices */
|
|
of_platform_bus_probe(NULL, of_bus_ids, NULL);
|
|
|
|
return 0;
|
|
}
|
|
machine_device_initcall(mpc885_ads, declare_of_platform_devices);
|
|
|
|
define_machine(mpc885_ads) {
|
|
.name = "Freescale MPC885 ADS",
|
|
.probe = mpc885ads_probe,
|
|
.setup_arch = mpc885ads_setup_arch,
|
|
.init_IRQ = mpc8xx_pics_init,
|
|
.get_irq = mpc8xx_get_irq,
|
|
.restart = mpc8xx_restart,
|
|
.calibrate_decr = mpc8xx_calibrate_decr,
|
|
.set_rtc_time = mpc8xx_set_rtc_time,
|
|
.get_rtc_time = mpc8xx_get_rtc_time,
|
|
.progress = udbg_progress,
|
|
};
|