2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/arch/arm/kernel/irq.c
Will Deacon 5e7371ded0 ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs
When a CPU is hotplugged off, we migrate any IRQs currently affine to it
away and onto another online CPU by calling the irq_set_affinity
function of the relevant interrupt controller chip. This function
returns either IRQ_SET_MASK_OK or IRQ_SET_MASK_OK_NOCOPY, to indicate
whether irq_data.affinity was updated.

If we are forcefully migrating an interrupt (because the affinity mask
no longer identifies any online CPUs) then we should update the IRQ
affinity mask to reflect the new CPU set. Failure to do so can
potentially leave /proc/irq/n/smp_affinity identifying only offline
CPUs, which may confuse userspace IRQ balancing daemons.

This patch updates migrate_one_irq to copy the affinity mask when
the interrupt chip returns IRQ_SET_MASK_OK after forcefully changing the
affinity of an interrupt.

Cc: stable@vger.kernel.org
Reported-by: Leif Lindholm <leif.lindholm@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-28 11:01:31 +01:00

197 lines
4.9 KiB
C

/*
* linux/arch/arm/kernel/irq.c
*
* Copyright (C) 1992 Linus Torvalds
* Modifications for ARM processor Copyright (C) 1995-2000 Russell King.
*
* Support for Dynamic Tick Timer Copyright (C) 2004-2005 Nokia Corporation.
* Dynamic Tick Timer written by Tony Lindgren <tony@atomide.com> and
* Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This file contains the code used by various IRQ handling routines:
* asking for different IRQ's should be done through these routines
* instead of just grabbing them. Thus setups with different IRQ numbers
* shouldn't result in any weird surprises, and installing new handlers
* should be easier.
*
* IRQ's are in fact implemented a bit like signal handlers for the kernel.
* Naturally it's not a 1:1 relation, but there are similarities.
*/
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/init.h>
#include <linux/seq_file.h>
#include <linux/errno.h>
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
#include <asm/exception.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
/*
* No architecture-specific irq_finish function defined in arm/arch/irqs.h.
*/
#ifndef irq_finish
#define irq_finish(irq) do { } while (0)
#endif
unsigned long irq_err_count;
int arch_show_interrupts(struct seq_file *p, int prec)
{
#ifdef CONFIG_FIQ
show_fiq_list(p, prec);
#endif
#ifdef CONFIG_SMP
show_ipi_list(p, prec);
#endif
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
/*
* handle_IRQ handles all hardware IRQ's. Decoded IRQs should
* not come via this function. Instead, they should provide their
* own 'handler'. Used by platform code implementing C-based 1st
* level decoding.
*/
void handle_IRQ(unsigned int irq, struct pt_regs *regs)
{
struct pt_regs *old_regs = set_irq_regs(regs);
irq_enter();
/*
* Some hardware gives randomly wrong interrupts. Rather
* than crashing, do something sensible.
*/
if (unlikely(irq >= nr_irqs)) {
if (printk_ratelimit())
printk(KERN_WARNING "Bad IRQ%u\n", irq);
ack_bad_irq(irq);
} else {
generic_handle_irq(irq);
}
/* AT91 specific workaround */
irq_finish(irq);
irq_exit();
set_irq_regs(old_regs);
}
/*
* asm_do_IRQ is the interface to be used from assembly code.
*/
asmlinkage void __exception_irq_entry
asm_do_IRQ(unsigned int irq, struct pt_regs *regs)
{
handle_IRQ(irq, regs);
}
void set_irq_flags(unsigned int irq, unsigned int iflags)
{
unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
if (irq >= nr_irqs) {
printk(KERN_ERR "Trying to set irq flags for IRQ%d\n", irq);
return;
}
if (iflags & IRQF_VALID)
clr |= IRQ_NOREQUEST;
if (iflags & IRQF_PROBE)
clr |= IRQ_NOPROBE;
if (!(iflags & IRQF_NOAUTOEN))
clr |= IRQ_NOAUTOEN;
/* Order is clear bits in "clr" then set bits in "set" */
irq_modify_status(irq, clr, set & ~clr);
}
void __init init_IRQ(void)
{
machine_desc->init_irq();
}
#ifdef CONFIG_SPARSE_IRQ
int __init arch_probe_nr_irqs(void)
{
nr_irqs = machine_desc->nr_irqs ? machine_desc->nr_irqs : NR_IRQS;
return nr_irqs;
}
#endif
#ifdef CONFIG_HOTPLUG_CPU
static bool migrate_one_irq(struct irq_desc *desc)
{
struct irq_data *d = irq_desc_get_irq_data(desc);
const struct cpumask *affinity = d->affinity;
struct irq_chip *c;
bool ret = false;
/*
* If this is a per-CPU interrupt, or the affinity does not
* include this CPU, then we have nothing to do.
*/
if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
return false;
if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
affinity = cpu_online_mask;
ret = true;
}
c = irq_data_get_irq_chip(d);
if (!c->irq_set_affinity)
pr_debug("IRQ%u: unable to set affinity\n", d->irq);
else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
cpumask_copy(d->affinity, affinity);
return ret;
}
/*
* The current CPU has been marked offline. Migrate IRQs off this CPU.
* If the affinity settings do not allow other CPUs, force them onto any
* available CPU.
*
* Note: we must iterate over all IRQs, whether they have an attached
* action structure or not, as we need to get chained interrupts too.
*/
void migrate_irqs(void)
{
unsigned int i;
struct irq_desc *desc;
unsigned long flags;
local_irq_save(flags);
for_each_irq_desc(i, desc) {
bool affinity_broken;
raw_spin_lock(&desc->lock);
affinity_broken = migrate_one_irq(desc);
raw_spin_unlock(&desc->lock);
if (affinity_broken && printk_ratelimit())
pr_warning("IRQ%u no longer affine to CPU%u\n", i,
smp_processor_id());
}
local_irq_restore(flags);
}
#endif /* CONFIG_HOTPLUG_CPU */