mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 23:53:55 +08:00
1286ff7397
This adds handle->fd and fd->handle support to i915, this is to allow for offloading of rendering in one direction and outputs in the other. v2 from Daniel Vetter: - fixup conflicts with the prepare/finish gtt prep work. - implement ppgtt binding support. Note that we have squat i-g-t testcoverage for any of the lifetime and access rules dma_buf/prime support brings along. And there are quite a few intricate situations here. Also note that the integration with the existing code is a bit hackish, especially around get_gtt_pages and put_gtt_pages. It imo would be easier with the prep code from Chris Wilson's unbound series, but that is for 3.6. Also note that I didn't bother to put the new prepare/finish gtt hooks to good use by moving the dma_buf_map/unmap_attachment calls in there (like we've originally planned for). Last but not least this patch is only compile-tested, but I've changed very little compared to Dave Airlie's version. So there's a decent chance v2 on drm-next works as well as v1 on 3.4-rc. v3: Right when I've hit sent I've noticed that I've screwed up one obj->sg_list (for dmar support) and obj->sg_table (for prime support) disdinction. We should be able to merge these 2 paths, but that's material for another patch. v4: fix the error reporting bugs pointed out by ickle. v5: fix another error, and stop non-gtt mmaps on shared objects stop pread/pwrite on imported objects, add fake kmap Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
1189 lines
32 KiB
C
1189 lines
32 KiB
C
/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
|
|
*/
|
|
/*
|
|
*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include "drmP.h"
|
|
#include "drm.h"
|
|
#include "i915_drm.h"
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
|
|
#include <linux/console.h>
|
|
#include <linux/module.h>
|
|
#include "drm_crtc_helper.h"
|
|
|
|
static int i915_modeset __read_mostly = -1;
|
|
module_param_named(modeset, i915_modeset, int, 0400);
|
|
MODULE_PARM_DESC(modeset,
|
|
"Use kernel modesetting [KMS] (0=DRM_I915_KMS from .config, "
|
|
"1=on, -1=force vga console preference [default])");
|
|
|
|
unsigned int i915_fbpercrtc __always_unused = 0;
|
|
module_param_named(fbpercrtc, i915_fbpercrtc, int, 0400);
|
|
|
|
int i915_panel_ignore_lid __read_mostly = 0;
|
|
module_param_named(panel_ignore_lid, i915_panel_ignore_lid, int, 0600);
|
|
MODULE_PARM_DESC(panel_ignore_lid,
|
|
"Override lid status (0=autodetect [default], 1=lid open, "
|
|
"-1=lid closed)");
|
|
|
|
unsigned int i915_powersave __read_mostly = 1;
|
|
module_param_named(powersave, i915_powersave, int, 0600);
|
|
MODULE_PARM_DESC(powersave,
|
|
"Enable powersavings, fbc, downclocking, etc. (default: true)");
|
|
|
|
int i915_semaphores __read_mostly = -1;
|
|
module_param_named(semaphores, i915_semaphores, int, 0600);
|
|
MODULE_PARM_DESC(semaphores,
|
|
"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
|
|
|
|
int i915_enable_rc6 __read_mostly = -1;
|
|
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0400);
|
|
MODULE_PARM_DESC(i915_enable_rc6,
|
|
"Enable power-saving render C-state 6. "
|
|
"Different stages can be selected via bitmask values "
|
|
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
|
|
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
|
|
"default: -1 (use per-chip default)");
|
|
|
|
int i915_enable_fbc __read_mostly = -1;
|
|
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
|
|
MODULE_PARM_DESC(i915_enable_fbc,
|
|
"Enable frame buffer compression for power savings "
|
|
"(default: -1 (use per-chip default))");
|
|
|
|
unsigned int i915_lvds_downclock __read_mostly = 0;
|
|
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
|
|
MODULE_PARM_DESC(lvds_downclock,
|
|
"Use panel (LVDS/eDP) downclocking for power savings "
|
|
"(default: false)");
|
|
|
|
int i915_lvds_channel_mode __read_mostly;
|
|
module_param_named(lvds_channel_mode, i915_lvds_channel_mode, int, 0600);
|
|
MODULE_PARM_DESC(lvds_channel_mode,
|
|
"Specify LVDS channel mode "
|
|
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
|
|
|
|
int i915_panel_use_ssc __read_mostly = -1;
|
|
module_param_named(lvds_use_ssc, i915_panel_use_ssc, int, 0600);
|
|
MODULE_PARM_DESC(lvds_use_ssc,
|
|
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
|
|
"(default: auto from VBT)");
|
|
|
|
int i915_vbt_sdvo_panel_type __read_mostly = -1;
|
|
module_param_named(vbt_sdvo_panel_type, i915_vbt_sdvo_panel_type, int, 0600);
|
|
MODULE_PARM_DESC(vbt_sdvo_panel_type,
|
|
"Override/Ignore selection of SDVO panel mode in the VBT "
|
|
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
|
|
|
|
static bool i915_try_reset __read_mostly = true;
|
|
module_param_named(reset, i915_try_reset, bool, 0600);
|
|
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
|
|
|
|
bool i915_enable_hangcheck __read_mostly = true;
|
|
module_param_named(enable_hangcheck, i915_enable_hangcheck, bool, 0644);
|
|
MODULE_PARM_DESC(enable_hangcheck,
|
|
"Periodically check GPU activity for detecting hangs. "
|
|
"WARNING: Disabling this can cause system wide hangs. "
|
|
"(default: true)");
|
|
|
|
int i915_enable_ppgtt __read_mostly = -1;
|
|
module_param_named(i915_enable_ppgtt, i915_enable_ppgtt, int, 0600);
|
|
MODULE_PARM_DESC(i915_enable_ppgtt,
|
|
"Enable PPGTT (default: true)");
|
|
|
|
static struct drm_driver driver;
|
|
extern int intel_agp_enabled;
|
|
|
|
#define INTEL_VGA_DEVICE(id, info) { \
|
|
.class = PCI_BASE_CLASS_DISPLAY << 16, \
|
|
.class_mask = 0xff0000, \
|
|
.vendor = 0x8086, \
|
|
.device = id, \
|
|
.subvendor = PCI_ANY_ID, \
|
|
.subdevice = PCI_ANY_ID, \
|
|
.driver_data = (unsigned long) info }
|
|
|
|
static const struct intel_device_info intel_i830_info = {
|
|
.gen = 2, .is_mobile = 1, .cursor_needs_physical = 1,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_845g_info = {
|
|
.gen = 2,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_i85x_info = {
|
|
.gen = 2, .is_i85x = 1, .is_mobile = 1,
|
|
.cursor_needs_physical = 1,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_i865g_info = {
|
|
.gen = 2,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_i915g_info = {
|
|
.gen = 3, .is_i915g = 1, .cursor_needs_physical = 1,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
};
|
|
static const struct intel_device_info intel_i915gm_info = {
|
|
.gen = 3, .is_mobile = 1,
|
|
.cursor_needs_physical = 1,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
.supports_tv = 1,
|
|
};
|
|
static const struct intel_device_info intel_i945g_info = {
|
|
.gen = 3, .has_hotplug = 1, .cursor_needs_physical = 1,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
};
|
|
static const struct intel_device_info intel_i945gm_info = {
|
|
.gen = 3, .is_i945gm = 1, .is_mobile = 1,
|
|
.has_hotplug = 1, .cursor_needs_physical = 1,
|
|
.has_overlay = 1, .overlay_needs_physical = 1,
|
|
.supports_tv = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_i965g_info = {
|
|
.gen = 4, .is_broadwater = 1,
|
|
.has_hotplug = 1,
|
|
.has_overlay = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_i965gm_info = {
|
|
.gen = 4, .is_crestline = 1,
|
|
.is_mobile = 1, .has_fbc = 1, .has_hotplug = 1,
|
|
.has_overlay = 1,
|
|
.supports_tv = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_g33_info = {
|
|
.gen = 3, .is_g33 = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_overlay = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_g45_info = {
|
|
.gen = 4, .is_g4x = 1, .need_gfx_hws = 1,
|
|
.has_pipe_cxsr = 1, .has_hotplug = 1,
|
|
.has_bsd_ring = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_gm45_info = {
|
|
.gen = 4, .is_g4x = 1,
|
|
.is_mobile = 1, .need_gfx_hws = 1, .has_fbc = 1,
|
|
.has_pipe_cxsr = 1, .has_hotplug = 1,
|
|
.supports_tv = 1,
|
|
.has_bsd_ring = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_pineview_info = {
|
|
.gen = 3, .is_g33 = 1, .is_pineview = 1, .is_mobile = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_overlay = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_ironlake_d_info = {
|
|
.gen = 5,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_ironlake_m_info = {
|
|
.gen = 5, .is_mobile = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_fbc = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_sandybridge_d_info = {
|
|
.gen = 6,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.has_llc = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_sandybridge_m_info = {
|
|
.gen = 6, .is_mobile = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_fbc = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.has_llc = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_ivybridge_d_info = {
|
|
.is_ivybridge = 1, .gen = 7,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.has_llc = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_ivybridge_m_info = {
|
|
.is_ivybridge = 1, .gen = 7, .is_mobile = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_fbc = 0, /* FBC is not enabled on Ivybridge mobile yet */
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.has_llc = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_valleyview_m_info = {
|
|
.gen = 7, .is_mobile = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_fbc = 0,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.is_valleyview = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_valleyview_d_info = {
|
|
.gen = 7,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_fbc = 0,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.is_valleyview = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_haswell_d_info = {
|
|
.is_haswell = 1, .gen = 7,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.has_llc = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct intel_device_info intel_haswell_m_info = {
|
|
.is_haswell = 1, .gen = 7, .is_mobile = 1,
|
|
.need_gfx_hws = 1, .has_hotplug = 1,
|
|
.has_bsd_ring = 1,
|
|
.has_blt_ring = 1,
|
|
.has_llc = 1,
|
|
.has_pch_split = 1,
|
|
};
|
|
|
|
static const struct pci_device_id pciidlist[] = { /* aka */
|
|
INTEL_VGA_DEVICE(0x3577, &intel_i830_info), /* I830_M */
|
|
INTEL_VGA_DEVICE(0x2562, &intel_845g_info), /* 845_G */
|
|
INTEL_VGA_DEVICE(0x3582, &intel_i85x_info), /* I855_GM */
|
|
INTEL_VGA_DEVICE(0x358e, &intel_i85x_info),
|
|
INTEL_VGA_DEVICE(0x2572, &intel_i865g_info), /* I865_G */
|
|
INTEL_VGA_DEVICE(0x2582, &intel_i915g_info), /* I915_G */
|
|
INTEL_VGA_DEVICE(0x258a, &intel_i915g_info), /* E7221_G */
|
|
INTEL_VGA_DEVICE(0x2592, &intel_i915gm_info), /* I915_GM */
|
|
INTEL_VGA_DEVICE(0x2772, &intel_i945g_info), /* I945_G */
|
|
INTEL_VGA_DEVICE(0x27a2, &intel_i945gm_info), /* I945_GM */
|
|
INTEL_VGA_DEVICE(0x27ae, &intel_i945gm_info), /* I945_GME */
|
|
INTEL_VGA_DEVICE(0x2972, &intel_i965g_info), /* I946_GZ */
|
|
INTEL_VGA_DEVICE(0x2982, &intel_i965g_info), /* G35_G */
|
|
INTEL_VGA_DEVICE(0x2992, &intel_i965g_info), /* I965_Q */
|
|
INTEL_VGA_DEVICE(0x29a2, &intel_i965g_info), /* I965_G */
|
|
INTEL_VGA_DEVICE(0x29b2, &intel_g33_info), /* Q35_G */
|
|
INTEL_VGA_DEVICE(0x29c2, &intel_g33_info), /* G33_G */
|
|
INTEL_VGA_DEVICE(0x29d2, &intel_g33_info), /* Q33_G */
|
|
INTEL_VGA_DEVICE(0x2a02, &intel_i965gm_info), /* I965_GM */
|
|
INTEL_VGA_DEVICE(0x2a12, &intel_i965gm_info), /* I965_GME */
|
|
INTEL_VGA_DEVICE(0x2a42, &intel_gm45_info), /* GM45_G */
|
|
INTEL_VGA_DEVICE(0x2e02, &intel_g45_info), /* IGD_E_G */
|
|
INTEL_VGA_DEVICE(0x2e12, &intel_g45_info), /* Q45_G */
|
|
INTEL_VGA_DEVICE(0x2e22, &intel_g45_info), /* G45_G */
|
|
INTEL_VGA_DEVICE(0x2e32, &intel_g45_info), /* G41_G */
|
|
INTEL_VGA_DEVICE(0x2e42, &intel_g45_info), /* B43_G */
|
|
INTEL_VGA_DEVICE(0x2e92, &intel_g45_info), /* B43_G.1 */
|
|
INTEL_VGA_DEVICE(0xa001, &intel_pineview_info),
|
|
INTEL_VGA_DEVICE(0xa011, &intel_pineview_info),
|
|
INTEL_VGA_DEVICE(0x0042, &intel_ironlake_d_info),
|
|
INTEL_VGA_DEVICE(0x0046, &intel_ironlake_m_info),
|
|
INTEL_VGA_DEVICE(0x0102, &intel_sandybridge_d_info),
|
|
INTEL_VGA_DEVICE(0x0112, &intel_sandybridge_d_info),
|
|
INTEL_VGA_DEVICE(0x0122, &intel_sandybridge_d_info),
|
|
INTEL_VGA_DEVICE(0x0106, &intel_sandybridge_m_info),
|
|
INTEL_VGA_DEVICE(0x0116, &intel_sandybridge_m_info),
|
|
INTEL_VGA_DEVICE(0x0126, &intel_sandybridge_m_info),
|
|
INTEL_VGA_DEVICE(0x010A, &intel_sandybridge_d_info),
|
|
INTEL_VGA_DEVICE(0x0156, &intel_ivybridge_m_info), /* GT1 mobile */
|
|
INTEL_VGA_DEVICE(0x0166, &intel_ivybridge_m_info), /* GT2 mobile */
|
|
INTEL_VGA_DEVICE(0x0152, &intel_ivybridge_d_info), /* GT1 desktop */
|
|
INTEL_VGA_DEVICE(0x0162, &intel_ivybridge_d_info), /* GT2 desktop */
|
|
INTEL_VGA_DEVICE(0x015a, &intel_ivybridge_d_info), /* GT1 server */
|
|
INTEL_VGA_DEVICE(0x016a, &intel_ivybridge_d_info), /* GT2 server */
|
|
INTEL_VGA_DEVICE(0x0402, &intel_haswell_d_info), /* GT1 desktop */
|
|
INTEL_VGA_DEVICE(0x0412, &intel_haswell_d_info), /* GT2 desktop */
|
|
INTEL_VGA_DEVICE(0x040a, &intel_haswell_d_info), /* GT1 server */
|
|
INTEL_VGA_DEVICE(0x041a, &intel_haswell_d_info), /* GT2 server */
|
|
INTEL_VGA_DEVICE(0x0406, &intel_haswell_m_info), /* GT1 mobile */
|
|
INTEL_VGA_DEVICE(0x0416, &intel_haswell_m_info), /* GT2 mobile */
|
|
INTEL_VGA_DEVICE(0x0c16, &intel_haswell_d_info), /* SDV */
|
|
{0, 0, 0}
|
|
};
|
|
|
|
#if defined(CONFIG_DRM_I915_KMS)
|
|
MODULE_DEVICE_TABLE(pci, pciidlist);
|
|
#endif
|
|
|
|
#define INTEL_PCH_DEVICE_ID_MASK 0xff00
|
|
#define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00
|
|
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
|
|
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
|
|
#define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00
|
|
|
|
void intel_detect_pch(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
struct pci_dev *pch;
|
|
|
|
/*
|
|
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
|
|
* make graphics device passthrough work easy for VMM, that only
|
|
* need to expose ISA bridge to let driver know the real hardware
|
|
* underneath. This is a requirement from virtualization team.
|
|
*/
|
|
pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, NULL);
|
|
if (pch) {
|
|
if (pch->vendor == PCI_VENDOR_ID_INTEL) {
|
|
int id;
|
|
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
|
|
|
|
if (id == INTEL_PCH_IBX_DEVICE_ID_TYPE) {
|
|
dev_priv->pch_type = PCH_IBX;
|
|
dev_priv->num_pch_pll = 2;
|
|
DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
|
|
} else if (id == INTEL_PCH_CPT_DEVICE_ID_TYPE) {
|
|
dev_priv->pch_type = PCH_CPT;
|
|
dev_priv->num_pch_pll = 2;
|
|
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
|
|
} else if (id == INTEL_PCH_PPT_DEVICE_ID_TYPE) {
|
|
/* PantherPoint is CPT compatible */
|
|
dev_priv->pch_type = PCH_CPT;
|
|
dev_priv->num_pch_pll = 2;
|
|
DRM_DEBUG_KMS("Found PatherPoint PCH\n");
|
|
} else if (id == INTEL_PCH_LPT_DEVICE_ID_TYPE) {
|
|
dev_priv->pch_type = PCH_LPT;
|
|
dev_priv->num_pch_pll = 0;
|
|
DRM_DEBUG_KMS("Found LynxPoint PCH\n");
|
|
}
|
|
BUG_ON(dev_priv->num_pch_pll > I915_NUM_PLLS);
|
|
}
|
|
pci_dev_put(pch);
|
|
}
|
|
}
|
|
|
|
bool i915_semaphore_is_enabled(struct drm_device *dev)
|
|
{
|
|
if (INTEL_INFO(dev)->gen < 6)
|
|
return 0;
|
|
|
|
if (i915_semaphores >= 0)
|
|
return i915_semaphores;
|
|
|
|
#ifdef CONFIG_INTEL_IOMMU
|
|
/* Enable semaphores on SNB when IO remapping is off */
|
|
if (INTEL_INFO(dev)->gen == 6 && intel_iommu_gfx_mapped)
|
|
return false;
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
int count;
|
|
|
|
count = 0;
|
|
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1))
|
|
udelay(10);
|
|
|
|
I915_WRITE_NOTRACE(FORCEWAKE, 1);
|
|
POSTING_READ(FORCEWAKE);
|
|
|
|
count = 0;
|
|
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1) == 0)
|
|
udelay(10);
|
|
}
|
|
|
|
void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
int count;
|
|
|
|
count = 0;
|
|
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
|
|
udelay(10);
|
|
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1));
|
|
POSTING_READ(FORCEWAKE_MT);
|
|
|
|
count = 0;
|
|
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
|
|
udelay(10);
|
|
}
|
|
|
|
/*
|
|
* Generally this is called implicitly by the register read function. However,
|
|
* if some sequence requires the GT to not power down then this function should
|
|
* be called at the beginning of the sequence followed by a call to
|
|
* gen6_gt_force_wake_put() at the end of the sequence.
|
|
*/
|
|
void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
|
|
if (dev_priv->forcewake_count++ == 0)
|
|
dev_priv->display.force_wake_get(dev_priv);
|
|
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
|
|
}
|
|
|
|
static void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 gtfifodbg;
|
|
gtfifodbg = I915_READ_NOTRACE(GTFIFODBG);
|
|
if (WARN(gtfifodbg & GT_FIFO_CPU_ERROR_MASK,
|
|
"MMIO read or write has been dropped %x\n", gtfifodbg))
|
|
I915_WRITE_NOTRACE(GTFIFODBG, GT_FIFO_CPU_ERROR_MASK);
|
|
}
|
|
|
|
void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE, 0);
|
|
/* The below doubles as a POSTING_READ */
|
|
gen6_gt_check_fifodbg(dev_priv);
|
|
}
|
|
|
|
void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(1));
|
|
/* The below doubles as a POSTING_READ */
|
|
gen6_gt_check_fifodbg(dev_priv);
|
|
}
|
|
|
|
/*
|
|
* see gen6_gt_force_wake_get()
|
|
*/
|
|
void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long irqflags;
|
|
|
|
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
|
|
if (--dev_priv->forcewake_count == 0)
|
|
dev_priv->display.force_wake_put(dev_priv);
|
|
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
|
|
}
|
|
|
|
int __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (dev_priv->gt_fifo_count < GT_FIFO_NUM_RESERVED_ENTRIES) {
|
|
int loop = 500;
|
|
u32 fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
|
|
while (fifo <= GT_FIFO_NUM_RESERVED_ENTRIES && loop--) {
|
|
udelay(10);
|
|
fifo = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
|
|
}
|
|
if (WARN_ON(loop < 0 && fifo <= GT_FIFO_NUM_RESERVED_ENTRIES))
|
|
++ret;
|
|
dev_priv->gt_fifo_count = fifo;
|
|
}
|
|
dev_priv->gt_fifo_count--;
|
|
|
|
return ret;
|
|
}
|
|
|
|
void vlv_force_wake_get(struct drm_i915_private *dev_priv)
|
|
{
|
|
int count;
|
|
|
|
count = 0;
|
|
|
|
/* Already awake? */
|
|
if ((I915_READ(0x130094) & 0xa1) == 0xa1)
|
|
return;
|
|
|
|
I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
|
|
POSTING_READ(FORCEWAKE_VLV);
|
|
|
|
count = 0;
|
|
while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1) == 0)
|
|
udelay(10);
|
|
}
|
|
|
|
void vlv_force_wake_put(struct drm_i915_private *dev_priv)
|
|
{
|
|
I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffff0000);
|
|
/* FIXME: confirm VLV behavior with Punit folks */
|
|
POSTING_READ(FORCEWAKE_VLV);
|
|
}
|
|
|
|
static int i915_drm_freeze(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
drm_kms_helper_poll_disable(dev);
|
|
|
|
pci_save_state(dev->pdev);
|
|
|
|
/* If KMS is active, we do the leavevt stuff here */
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
|
int error = i915_gem_idle(dev);
|
|
if (error) {
|
|
dev_err(&dev->pdev->dev,
|
|
"GEM idle failed, resume might fail\n");
|
|
return error;
|
|
}
|
|
drm_irq_uninstall(dev);
|
|
}
|
|
|
|
i915_save_state(dev);
|
|
|
|
intel_opregion_fini(dev);
|
|
|
|
/* Modeset on resume, not lid events */
|
|
dev_priv->modeset_on_lid = 0;
|
|
|
|
console_lock();
|
|
intel_fbdev_set_suspend(dev, 1);
|
|
console_unlock();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i915_suspend(struct drm_device *dev, pm_message_t state)
|
|
{
|
|
int error;
|
|
|
|
if (!dev || !dev->dev_private) {
|
|
DRM_ERROR("dev: %p\n", dev);
|
|
DRM_ERROR("DRM not initialized, aborting suspend.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (state.event == PM_EVENT_PRETHAW)
|
|
return 0;
|
|
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
error = i915_drm_freeze(dev);
|
|
if (error)
|
|
return error;
|
|
|
|
if (state.event == PM_EVENT_SUSPEND) {
|
|
/* Shut down the device */
|
|
pci_disable_device(dev->pdev);
|
|
pci_set_power_state(dev->pdev, PCI_D3hot);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_drm_thaw(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int error = 0;
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
|
mutex_lock(&dev->struct_mutex);
|
|
i915_gem_restore_gtt_mappings(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
i915_restore_state(dev);
|
|
intel_opregion_setup(dev);
|
|
|
|
/* KMS EnterVT equivalent */
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
|
|
if (HAS_PCH_SPLIT(dev))
|
|
ironlake_init_pch_refclk(dev);
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
dev_priv->mm.suspended = 0;
|
|
|
|
error = i915_gem_init_hw(dev);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
intel_modeset_init_hw(dev);
|
|
drm_mode_config_reset(dev);
|
|
drm_irq_install(dev);
|
|
|
|
/* Resume the modeset for every activated CRTC */
|
|
mutex_lock(&dev->mode_config.mutex);
|
|
drm_helper_resume_force_mode(dev);
|
|
mutex_unlock(&dev->mode_config.mutex);
|
|
}
|
|
|
|
intel_opregion_init(dev);
|
|
|
|
dev_priv->modeset_on_lid = 0;
|
|
|
|
console_lock();
|
|
intel_fbdev_set_suspend(dev, 0);
|
|
console_unlock();
|
|
return error;
|
|
}
|
|
|
|
int i915_resume(struct drm_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
if (pci_enable_device(dev->pdev))
|
|
return -EIO;
|
|
|
|
pci_set_master(dev->pdev);
|
|
|
|
ret = i915_drm_thaw(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
drm_kms_helper_poll_enable(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int i8xx_do_reset(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
|
|
if (IS_I85X(dev))
|
|
return -ENODEV;
|
|
|
|
I915_WRITE(D_STATE, I915_READ(D_STATE) | DSTATE_GFX_RESET_I830);
|
|
POSTING_READ(D_STATE);
|
|
|
|
if (IS_I830(dev) || IS_845G(dev)) {
|
|
I915_WRITE(DEBUG_RESET_I830,
|
|
DEBUG_RESET_DISPLAY |
|
|
DEBUG_RESET_RENDER |
|
|
DEBUG_RESET_FULL);
|
|
POSTING_READ(DEBUG_RESET_I830);
|
|
msleep(1);
|
|
|
|
I915_WRITE(DEBUG_RESET_I830, 0);
|
|
POSTING_READ(DEBUG_RESET_I830);
|
|
}
|
|
|
|
msleep(1);
|
|
|
|
I915_WRITE(D_STATE, I915_READ(D_STATE) & ~DSTATE_GFX_RESET_I830);
|
|
POSTING_READ(D_STATE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i965_reset_complete(struct drm_device *dev)
|
|
{
|
|
u8 gdrst;
|
|
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
|
|
return (gdrst & GRDOM_RESET_ENABLE) == 0;
|
|
}
|
|
|
|
static int i965_do_reset(struct drm_device *dev)
|
|
{
|
|
int ret;
|
|
u8 gdrst;
|
|
|
|
/*
|
|
* Set the domains we want to reset (GRDOM/bits 2 and 3) as
|
|
* well as the reset bit (GR/bit 0). Setting the GR bit
|
|
* triggers the reset; when done, the hardware will clear it.
|
|
*/
|
|
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
|
|
pci_write_config_byte(dev->pdev, I965_GDRST,
|
|
gdrst | GRDOM_RENDER |
|
|
GRDOM_RESET_ENABLE);
|
|
ret = wait_for(i965_reset_complete(dev), 500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* We can't reset render&media without also resetting display ... */
|
|
pci_read_config_byte(dev->pdev, I965_GDRST, &gdrst);
|
|
pci_write_config_byte(dev->pdev, I965_GDRST,
|
|
gdrst | GRDOM_MEDIA |
|
|
GRDOM_RESET_ENABLE);
|
|
|
|
return wait_for(i965_reset_complete(dev), 500);
|
|
}
|
|
|
|
static int ironlake_do_reset(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
u32 gdrst;
|
|
int ret;
|
|
|
|
gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
|
|
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
|
|
gdrst | GRDOM_RENDER | GRDOM_RESET_ENABLE);
|
|
ret = wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* We can't reset render&media without also resetting display ... */
|
|
gdrst = I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR);
|
|
I915_WRITE(MCHBAR_MIRROR_BASE + ILK_GDSR,
|
|
gdrst | GRDOM_MEDIA | GRDOM_RESET_ENABLE);
|
|
return wait_for(I915_READ(MCHBAR_MIRROR_BASE + ILK_GDSR) & 0x1, 500);
|
|
}
|
|
|
|
static int gen6_do_reset(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret;
|
|
unsigned long irqflags;
|
|
|
|
/* Hold gt_lock across reset to prevent any register access
|
|
* with forcewake not set correctly
|
|
*/
|
|
spin_lock_irqsave(&dev_priv->gt_lock, irqflags);
|
|
|
|
/* Reset the chip */
|
|
|
|
/* GEN6_GDRST is not in the gt power well, no need to check
|
|
* for fifo space for the write or forcewake the chip for
|
|
* the read
|
|
*/
|
|
I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL);
|
|
|
|
/* Spin waiting for the device to ack the reset request */
|
|
ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500);
|
|
|
|
/* If reset with a user forcewake, try to restore, otherwise turn it off */
|
|
if (dev_priv->forcewake_count)
|
|
dev_priv->display.force_wake_get(dev_priv);
|
|
else
|
|
dev_priv->display.force_wake_put(dev_priv);
|
|
|
|
/* Restore fifo count */
|
|
dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES);
|
|
|
|
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags);
|
|
return ret;
|
|
}
|
|
|
|
static int intel_gpu_reset(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = dev->dev_private;
|
|
int ret = -ENODEV;
|
|
|
|
switch (INTEL_INFO(dev)->gen) {
|
|
case 7:
|
|
case 6:
|
|
ret = gen6_do_reset(dev);
|
|
break;
|
|
case 5:
|
|
ret = ironlake_do_reset(dev);
|
|
break;
|
|
case 4:
|
|
ret = i965_do_reset(dev);
|
|
break;
|
|
case 2:
|
|
ret = i8xx_do_reset(dev);
|
|
break;
|
|
}
|
|
|
|
/* Also reset the gpu hangman. */
|
|
if (dev_priv->stop_rings) {
|
|
DRM_DEBUG("Simulated gpu hang, resetting stop_rings\n");
|
|
dev_priv->stop_rings = 0;
|
|
if (ret == -ENODEV) {
|
|
DRM_ERROR("Reset not implemented, but ignoring "
|
|
"error for simulated gpu hangs\n");
|
|
ret = 0;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i915_reset - reset chip after a hang
|
|
* @dev: drm device to reset
|
|
*
|
|
* Reset the chip. Useful if a hang is detected. Returns zero on successful
|
|
* reset or otherwise an error code.
|
|
*
|
|
* Procedure is fairly simple:
|
|
* - reset the chip using the reset reg
|
|
* - re-init context state
|
|
* - re-init hardware status page
|
|
* - re-init ring buffer
|
|
* - re-init interrupt state
|
|
* - re-init display
|
|
*/
|
|
int i915_reset(struct drm_device *dev)
|
|
{
|
|
drm_i915_private_t *dev_priv = dev->dev_private;
|
|
int ret;
|
|
|
|
if (!i915_try_reset)
|
|
return 0;
|
|
|
|
if (!mutex_trylock(&dev->struct_mutex))
|
|
return -EBUSY;
|
|
|
|
dev_priv->stop_rings = 0;
|
|
|
|
i915_gem_reset(dev);
|
|
|
|
ret = -ENODEV;
|
|
if (get_seconds() - dev_priv->last_gpu_reset < 5)
|
|
DRM_ERROR("GPU hanging too fast, declaring wedged!\n");
|
|
else
|
|
ret = intel_gpu_reset(dev);
|
|
|
|
dev_priv->last_gpu_reset = get_seconds();
|
|
if (ret) {
|
|
DRM_ERROR("Failed to reset chip.\n");
|
|
mutex_unlock(&dev->struct_mutex);
|
|
return ret;
|
|
}
|
|
|
|
/* Ok, now get things going again... */
|
|
|
|
/*
|
|
* Everything depends on having the GTT running, so we need to start
|
|
* there. Fortunately we don't need to do this unless we reset the
|
|
* chip at a PCI level.
|
|
*
|
|
* Next we need to restore the context, but we don't use those
|
|
* yet either...
|
|
*
|
|
* Ring buffer needs to be re-initialized in the KMS case, or if X
|
|
* was running at the time of the reset (i.e. we weren't VT
|
|
* switched away).
|
|
*/
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET) ||
|
|
!dev_priv->mm.suspended) {
|
|
struct intel_ring_buffer *ring;
|
|
int i;
|
|
|
|
dev_priv->mm.suspended = 0;
|
|
|
|
i915_gem_init_swizzling(dev);
|
|
|
|
for_each_ring(ring, dev_priv, i)
|
|
ring->init(ring);
|
|
|
|
i915_gem_init_ppgtt(dev);
|
|
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
if (drm_core_check_feature(dev, DRIVER_MODESET))
|
|
intel_modeset_init_hw(dev);
|
|
|
|
drm_irq_uninstall(dev);
|
|
drm_irq_install(dev);
|
|
} else {
|
|
mutex_unlock(&dev->struct_mutex);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int __devinit
|
|
i915_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
/* Only bind to function 0 of the device. Early generations
|
|
* used function 1 as a placeholder for multi-head. This causes
|
|
* us confusion instead, especially on the systems where both
|
|
* functions have the same PCI-ID!
|
|
*/
|
|
if (PCI_FUNC(pdev->devfn))
|
|
return -ENODEV;
|
|
|
|
return drm_get_pci_dev(pdev, ent, &driver);
|
|
}
|
|
|
|
static void
|
|
i915_pci_remove(struct pci_dev *pdev)
|
|
{
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
drm_put_dev(dev);
|
|
}
|
|
|
|
static int i915_pm_suspend(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
int error;
|
|
|
|
if (!drm_dev || !drm_dev->dev_private) {
|
|
dev_err(dev, "DRM not initialized, aborting suspend.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (drm_dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
error = i915_drm_freeze(drm_dev);
|
|
if (error)
|
|
return error;
|
|
|
|
pci_disable_device(pdev);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_pm_resume(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
return i915_resume(drm_dev);
|
|
}
|
|
|
|
static int i915_pm_freeze(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
if (!drm_dev || !drm_dev->dev_private) {
|
|
dev_err(dev, "DRM not initialized, aborting suspend.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return i915_drm_freeze(drm_dev);
|
|
}
|
|
|
|
static int i915_pm_thaw(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
return i915_drm_thaw(drm_dev);
|
|
}
|
|
|
|
static int i915_pm_poweroff(struct device *dev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct drm_device *drm_dev = pci_get_drvdata(pdev);
|
|
|
|
return i915_drm_freeze(drm_dev);
|
|
}
|
|
|
|
static const struct dev_pm_ops i915_pm_ops = {
|
|
.suspend = i915_pm_suspend,
|
|
.resume = i915_pm_resume,
|
|
.freeze = i915_pm_freeze,
|
|
.thaw = i915_pm_thaw,
|
|
.poweroff = i915_pm_poweroff,
|
|
.restore = i915_pm_resume,
|
|
};
|
|
|
|
static const struct vm_operations_struct i915_gem_vm_ops = {
|
|
.fault = i915_gem_fault,
|
|
.open = drm_gem_vm_open,
|
|
.close = drm_gem_vm_close,
|
|
};
|
|
|
|
static const struct file_operations i915_driver_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = drm_open,
|
|
.release = drm_release,
|
|
.unlocked_ioctl = drm_ioctl,
|
|
.mmap = drm_gem_mmap,
|
|
.poll = drm_poll,
|
|
.fasync = drm_fasync,
|
|
.read = drm_read,
|
|
#ifdef CONFIG_COMPAT
|
|
.compat_ioctl = i915_compat_ioctl,
|
|
#endif
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
static struct drm_driver driver = {
|
|
/* Don't use MTRRs here; the Xserver or userspace app should
|
|
* deal with them for Intel hardware.
|
|
*/
|
|
.driver_features =
|
|
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
|
|
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME,
|
|
.load = i915_driver_load,
|
|
.unload = i915_driver_unload,
|
|
.open = i915_driver_open,
|
|
.lastclose = i915_driver_lastclose,
|
|
.preclose = i915_driver_preclose,
|
|
.postclose = i915_driver_postclose,
|
|
|
|
/* Used in place of i915_pm_ops for non-DRIVER_MODESET */
|
|
.suspend = i915_suspend,
|
|
.resume = i915_resume,
|
|
|
|
.device_is_agp = i915_driver_device_is_agp,
|
|
.reclaim_buffers = drm_core_reclaim_buffers,
|
|
.master_create = i915_master_create,
|
|
.master_destroy = i915_master_destroy,
|
|
#if defined(CONFIG_DEBUG_FS)
|
|
.debugfs_init = i915_debugfs_init,
|
|
.debugfs_cleanup = i915_debugfs_cleanup,
|
|
#endif
|
|
.gem_init_object = i915_gem_init_object,
|
|
.gem_free_object = i915_gem_free_object,
|
|
.gem_vm_ops = &i915_gem_vm_ops,
|
|
|
|
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
|
|
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
|
|
.gem_prime_export = i915_gem_prime_export,
|
|
.gem_prime_import = i915_gem_prime_import,
|
|
|
|
.dumb_create = i915_gem_dumb_create,
|
|
.dumb_map_offset = i915_gem_mmap_gtt,
|
|
.dumb_destroy = i915_gem_dumb_destroy,
|
|
.ioctls = i915_ioctls,
|
|
.fops = &i915_driver_fops,
|
|
.name = DRIVER_NAME,
|
|
.desc = DRIVER_DESC,
|
|
.date = DRIVER_DATE,
|
|
.major = DRIVER_MAJOR,
|
|
.minor = DRIVER_MINOR,
|
|
.patchlevel = DRIVER_PATCHLEVEL,
|
|
};
|
|
|
|
static struct pci_driver i915_pci_driver = {
|
|
.name = DRIVER_NAME,
|
|
.id_table = pciidlist,
|
|
.probe = i915_pci_probe,
|
|
.remove = i915_pci_remove,
|
|
.driver.pm = &i915_pm_ops,
|
|
};
|
|
|
|
static int __init i915_init(void)
|
|
{
|
|
if (!intel_agp_enabled) {
|
|
DRM_ERROR("drm/i915 can't work without intel_agp module!\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
driver.num_ioctls = i915_max_ioctl;
|
|
|
|
/*
|
|
* If CONFIG_DRM_I915_KMS is set, default to KMS unless
|
|
* explicitly disabled with the module pararmeter.
|
|
*
|
|
* Otherwise, just follow the parameter (defaulting to off).
|
|
*
|
|
* Allow optional vga_text_mode_force boot option to override
|
|
* the default behavior.
|
|
*/
|
|
#if defined(CONFIG_DRM_I915_KMS)
|
|
if (i915_modeset != 0)
|
|
driver.driver_features |= DRIVER_MODESET;
|
|
#endif
|
|
if (i915_modeset == 1)
|
|
driver.driver_features |= DRIVER_MODESET;
|
|
|
|
#ifdef CONFIG_VGA_CONSOLE
|
|
if (vgacon_text_force() && i915_modeset == -1)
|
|
driver.driver_features &= ~DRIVER_MODESET;
|
|
#endif
|
|
|
|
if (!(driver.driver_features & DRIVER_MODESET))
|
|
driver.get_vblank_timestamp = NULL;
|
|
|
|
return drm_pci_init(&driver, &i915_pci_driver);
|
|
}
|
|
|
|
static void __exit i915_exit(void)
|
|
{
|
|
drm_pci_exit(&driver, &i915_pci_driver);
|
|
}
|
|
|
|
module_init(i915_init);
|
|
module_exit(i915_exit);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL and additional rights");
|
|
|
|
/* We give fast paths for the really cool registers */
|
|
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
|
|
(((dev_priv)->info->gen >= 6) && \
|
|
((reg) < 0x40000) && \
|
|
((reg) != FORCEWAKE)) && \
|
|
(!IS_VALLEYVIEW((dev_priv)->dev))
|
|
|
|
#define __i915_read(x, y) \
|
|
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
|
|
u##x val = 0; \
|
|
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
|
|
unsigned long irqflags; \
|
|
spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \
|
|
if (dev_priv->forcewake_count == 0) \
|
|
dev_priv->display.force_wake_get(dev_priv); \
|
|
val = read##y(dev_priv->regs + reg); \
|
|
if (dev_priv->forcewake_count == 0) \
|
|
dev_priv->display.force_wake_put(dev_priv); \
|
|
spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \
|
|
} else { \
|
|
val = read##y(dev_priv->regs + reg); \
|
|
} \
|
|
trace_i915_reg_rw(false, reg, val, sizeof(val)); \
|
|
return val; \
|
|
}
|
|
|
|
__i915_read(8, b)
|
|
__i915_read(16, w)
|
|
__i915_read(32, l)
|
|
__i915_read(64, q)
|
|
#undef __i915_read
|
|
|
|
#define __i915_write(x, y) \
|
|
void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \
|
|
u32 __fifo_ret = 0; \
|
|
trace_i915_reg_rw(true, reg, val, sizeof(val)); \
|
|
if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \
|
|
__fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \
|
|
} \
|
|
write##y(val, dev_priv->regs + reg); \
|
|
if (unlikely(__fifo_ret)) { \
|
|
gen6_gt_check_fifodbg(dev_priv); \
|
|
} \
|
|
}
|
|
__i915_write(8, b)
|
|
__i915_write(16, w)
|
|
__i915_write(32, l)
|
|
__i915_write(64, q)
|
|
#undef __i915_write
|