renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 23:23:55 +08:00
Code
9d463f8a18
linux-next/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts
Maxime Ripard dfe8173dfd
ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings 
One of the usage of the LRADC is to implement buttons. The bindings define
that we should have one subnode per button, with their associated voltage
as a property.

However, there was no reg property but we still used the voltage associated
to the button as the unit-address, which eventually generated warnings in
DTC.

Rename the node names to avoid those warnings.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-05-30 13:37:46 +02:00

490 lines
10 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2017 Touchless Biometric Systems AG
* Tomas Novotny <tomas@novotny.cz>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun8i-a83t.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/input/input.h>
/ {
model = "TBS A711 Tablet";
compatible = "tbs-biometrics,a711", "allwinner,sun8i-a83t";
aliases {
serial0 = &uart0;
serial1 = &uart1;
};
chosen {
stdout-path = "serial0:115200n8";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
enable-gpios = <&pio 3 29 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
default-brightness-level = <9>;
};
panel {
compatible = "tbs,a711-panel", "panel-lvds";
backlight = <&backlight>;
power-supply = <&reg_sw>;
width-mm = <153>;
height-mm = <90>;
data-mapping = "vesa-24";
panel-timing {
/* 1024x600 @60Hz */
clock-frequency = <52000000>;
hactive = <1024>;
vactive = <600>;
hsync-len = <20>;
hfront-porch = <180>;
hback-porch = <160>;
vfront-porch = <12>;
vback-porch = <23>;
vsync-len = <5>;
};
port {
panel_input: endpoint {
remote-endpoint = <&tcon0_out_lcd>;
};
};
};
reg_gps: reg-gps {
compatible = "regulator-fixed";
regulator-name = "gps";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
reg_vbat: reg-vbat {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
};
reg_vmain: reg-vmain {
compatible = "regulator-fixed";
regulator-name = "vmain";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&reg_vbat>;
};
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 WL-PMU-EN */
/*
* This is actually Bluetooth's clock, but we have to
* hook it up somewheere
*/
clocks = <&ac100_rtc 1>;
clock-names = "ext_clock";
};
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
};
&cpu100 {
cpu-supply = <&reg_dcdc3>;
};
&de {
status = "okay";
};
/*
* An USB-2 hub is connected here, which also means we don't need to
* enable the OHCI controller.
*/
&ehci0 {
status = "okay";
};
/*
* There's a modem connected here that needs to be initialised before
* being able to be enumerated.
*/
&ehci1 {
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
accelerometer@18 {
compatible = "bosch,bma250";
reg = <0x18>;
interrupt-parent = <&pio>;
interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
};
};
&mmc0 {
vmmc-supply = <&reg_dcdc1>;
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins>;
bus-width = <4>;
cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&mmc1 {
mmc-pwrseq = <&wifi_pwrseq>;
bus-width = <4>;
vmmc-supply = <&reg_dldo1>;
vqmmc-supply = <&reg_dldo1>;
non-removable;
wakeup-source;
status = "okay";
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
interrupt-parent = <&r_pio>;
interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 WL_WAKE_UP */
interrupt-names = "host-wake";
};
};
&mmc2 {
pinctrl-0 = <&mmc2_8bit_emmc_pins>;
pinctrl-names = "default";
vmmc-supply = <&reg_dcdc1>;
vqmmc-supply = <&reg_dcdc1>;
bus-width = <8>;
non-removable;
cap-mmc-hw-reset;
status = "okay";
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm_pin>;
status = "okay";
};
&r_lradc {
vref-supply = <&reg_aldo2>;
status = "okay";
button-210 {
label = "Volume Up";
linux,code = <KEY_VOLUMEUP>;
channel = <0>;
voltage = <210000>;
};
button-410 {
label = "Volume Down";
linux,code = <KEY_VOLUMEDOWN>;
channel = <0>;
voltage = <410000>;
};
};
&r_rsb {
status = "okay";
axp81x: pmic@3a3 {
compatible = "x-powers,axp813";
reg = <0x3a3>;
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
swin-supply = <&reg_dcdc1>;
x-powers,drive-vbus-en;
};
ac100: codec@e89 {
compatible = "x-powers,ac100";
reg = <0xe89>;
ac100_codec: codec {
compatible = "x-powers,ac100-codec";
interrupt-parent = <&r_pio>;
interrupts = <0 12 IRQ_TYPE_LEVEL_LOW>; /* PL12 */
#clock-cells = <0>;
clock-output-names = "4M_adda";
};
ac100_rtc: rtc {
compatible = "x-powers,ac100-rtc";
interrupt-parent = <&r_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
clocks = <&ac100_codec>;
#clock-cells = <1>;
clock-output-names = "cko1_rtc",
"cko2_rtc",
"cko3_rtc";
};
};
};
#include "axp81x.dtsi"
&battery_power_supply {
status = "okay";
};
&reg_aldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-1.8";
};
&reg_aldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-name = "vdd-drampll";
};
&reg_aldo3 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-name = "avcc";
};
&reg_dcdc1 {
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-always-on;
regulator-name = "vcc-io";
};
&reg_dcdc2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-name = "vdd-cpu-A";
};
&reg_dcdc3 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-name = "vdd-cpu-B";
};
&reg_dcdc4 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-name = "vdd-gpu";
};
&reg_dcdc5 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-name = "vcc-dram";
};
&reg_dcdc6 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-always-on;
regulator-name = "vdd-sys";
};
&reg_dldo1 {
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-name = "vcc-wifi-io";
};
&reg_dldo2 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <4200000>;
regulator-name = "vcc-mipi";
};
&reg_dldo3 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "vdd-csi";
};
&reg_dldo4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-name = "avdd-csi";
};
&reg_drivevbus {
regulator-name = "usb0-vbus";
status = "okay";
};
&reg_eldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-csi-r";
};
&reg_eldo2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc-dsi";
};
&reg_eldo3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1800000>;
regulator-name = "dvdd-csi-f";
};
&reg_fldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-name = "vcc-hsic";
};
&reg_fldo2 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-name = "vdd-cpus";
};
&reg_ldo_io0 {
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-name = "vcc-ctp";
status = "okay";
};
&reg_ldo_io1 {
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-name = "vcc-vb";
status = "okay";
};
&reg_sw {
regulator-min-microvolt = <3100000>;
regulator-max-microvolt = <3100000>;
regulator-name = "vcc-lcd";
};
&tcon0 {
pinctrl-names = "default";
pinctrl-0 = <&lcd_lvds_pins>;
};
&tcon0_out {
tcon0_out_lcd: endpoint {
remote-endpoint = <&panel_input>;
};
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
/* There's the BT part of the AP6210 connected to that UART */
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
uart-has-rtscts;
status = "okay";
bluetooth {
compatible = "brcm,bcm20702a1";
clocks = <&ac100_rtc 1>;
clock-names = "lpo";
vbat-supply = <&reg_vbat>;
vddio-supply = <&reg_dldo1>;
device-wakeup-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
host-wakeup-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
shutdown-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
max-speed = <1500000>;
};
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pb_pins>;
status = "okay";
gnss {
compatible = "u-blox,neo-6m";
v-bckp-supply = <&reg_rtc_ldo>;
vcc-supply = <&reg_gps>;
current-speed = <9600>;
};
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
usb0_vbus-supply = <&reg_drivevbus>;
usb1_vbus-supply = <&reg_vmain>;
usb2_vbus-supply = <&reg_vmain>;
status = "okay";
};
View Git Blame Copy Permalink