2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/include/linux/usb/ehci_pdriver.h
Sergei Shtylyov 743fcce0a8 ehci-platform: add pre_setup() method to platform data
Sometimes there is a need  to initialize some non-standard registers mapped to
the EHCI region before accessing the standard EHCI registers.  Add pre_setup()
method with 'struct usb_hcd *' parameter to be called just before ehci_setup()
to the 'ehci-platform'  driver's platform data for this purpose...

While at it, add the missing incomplete declaration of 'struct platform_device'
to <linux/usb/ehci_pdriver.h>...

The patch has been tested on the Marzen and BOCK-W boards.

Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-11 16:10:45 +09:00

60 lines
2.1 KiB
C

/*
* Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __USB_CORE_EHCI_PDRIVER_H
#define __USB_CORE_EHCI_PDRIVER_H
struct platform_device;
struct usb_hcd;
/**
* struct usb_ehci_pdata - platform_data for generic ehci driver
*
* @caps_offset: offset of the EHCI Capability Registers to the start of
* the io memory region provided to the driver.
* @has_tt: set to 1 if TT is integrated in root hub.
* @port_power_on: set to 1 if the controller needs a power up after
* initialization.
* @port_power_off: set to 1 if the controller needs to be powered down
* after initialization.
* @no_io_watchdog: set to 1 if the controller does not need the I/O
* watchdog to run.
*
* These are general configuration options for the EHCI controller. All of
* these options are activating more or less workarounds for some hardware.
*/
struct usb_ehci_pdata {
int caps_offset;
unsigned has_tt:1;
unsigned has_synopsys_hc_bug:1;
unsigned big_endian_desc:1;
unsigned big_endian_mmio:1;
unsigned no_io_watchdog:1;
/* Turn on all power and clocks */
int (*power_on)(struct platform_device *pdev);
/* Turn off all power and clocks */
void (*power_off)(struct platform_device *pdev);
/* Turn on only VBUS suspend power and hotplug detection,
* turn off everything else */
void (*power_suspend)(struct platform_device *pdev);
int (*pre_setup)(struct usb_hcd *hcd);
};
#endif /* __USB_CORE_EHCI_PDRIVER_H */