2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/drivers/pci/hotplug/pcihp_slot.c
Jordan_Hargrave@Dell.com e522a7126c PCI: Set PCIE maxpayload for card during hotplug insertion
The following patch sets the MaxPayload setting to match the parent
reading when inserting a PCIE card into a hotplug slot.  On our system,
the upstream bridge is set to 256, but when inserting a card, the card
setting defaults to 128.  As soon as I/O is performed to the card it
starts receiving errors since the payload size is too small.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-05-10 15:43:41 -07:00

233 lines
7.1 KiB
C

/*
* Copyright (C) 1995,2001 Compaq Computer Corporation
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2001 IBM Corp.
* Copyright (C) 2003-2004 Intel Corporation
* (c) Copyright 2009 Hewlett-Packard Development Company, L.P.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/pci.h>
#include <linux/pci_hotplug.h>
static struct hpp_type0 pci_default_type0 = {
.revision = 1,
.cache_line_size = 8,
.latency_timer = 0x40,
.enable_serr = 0,
.enable_perr = 0,
};
static void program_hpp_type0(struct pci_dev *dev, struct hpp_type0 *hpp)
{
u16 pci_cmd, pci_bctl;
if (!hpp) {
/*
* Perhaps we *should* use default settings for PCIe, but
* pciehp didn't, so we won't either.
*/
if (pci_is_pcie(dev))
return;
dev_info(&dev->dev, "using default PCI settings\n");
hpp = &pci_default_type0;
}
if (hpp->revision > 1) {
dev_warn(&dev->dev,
"PCI settings rev %d not supported; using defaults\n",
hpp->revision);
hpp = &pci_default_type0;
}
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, hpp->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER, hpp->latency_timer);
pci_read_config_word(dev, PCI_COMMAND, &pci_cmd);
if (hpp->enable_serr)
pci_cmd |= PCI_COMMAND_SERR;
else
pci_cmd &= ~PCI_COMMAND_SERR;
if (hpp->enable_perr)
pci_cmd |= PCI_COMMAND_PARITY;
else
pci_cmd &= ~PCI_COMMAND_PARITY;
pci_write_config_word(dev, PCI_COMMAND, pci_cmd);
/* Program bridge control value */
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER,
hpp->latency_timer);
pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &pci_bctl);
if (hpp->enable_serr)
pci_bctl |= PCI_BRIDGE_CTL_SERR;
else
pci_bctl &= ~PCI_BRIDGE_CTL_SERR;
if (hpp->enable_perr)
pci_bctl |= PCI_BRIDGE_CTL_PARITY;
else
pci_bctl &= ~PCI_BRIDGE_CTL_PARITY;
pci_write_config_word(dev, PCI_BRIDGE_CONTROL, pci_bctl);
}
}
static void program_hpp_type1(struct pci_dev *dev, struct hpp_type1 *hpp)
{
if (hpp)
dev_warn(&dev->dev, "PCI-X settings not supported\n");
}
static void program_hpp_type2(struct pci_dev *dev, struct hpp_type2 *hpp)
{
int pos;
u16 reg16;
u32 reg32;
if (!hpp)
return;
/* Find PCI Express capability */
pos = pci_pcie_cap(dev);
if (!pos)
return;
if (hpp->revision > 1) {
dev_warn(&dev->dev, "PCIe settings rev %d not supported\n",
hpp->revision);
return;
}
/* Initialize Device Control Register */
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &reg16);
reg16 = (reg16 & hpp->pci_exp_devctl_and) | hpp->pci_exp_devctl_or;
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, reg16);
/* Initialize Link Control Register */
if (dev->subordinate) {
pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &reg16);
reg16 = (reg16 & hpp->pci_exp_lnkctl_and)
| hpp->pci_exp_lnkctl_or;
pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, reg16);
}
/* Find Advanced Error Reporting Enhanced Capability */
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
if (!pos)
return;
/* Initialize Uncorrectable Error Mask Register */
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, &reg32);
reg32 = (reg32 & hpp->unc_err_mask_and) | hpp->unc_err_mask_or;
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, reg32);
/* Initialize Uncorrectable Error Severity Register */
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &reg32);
reg32 = (reg32 & hpp->unc_err_sever_and) | hpp->unc_err_sever_or;
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, reg32);
/* Initialize Correctable Error Mask Register */
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, &reg32);
reg32 = (reg32 & hpp->cor_err_mask_and) | hpp->cor_err_mask_or;
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg32);
/* Initialize Advanced Error Capabilities and Control Register */
pci_read_config_dword(dev, pos + PCI_ERR_CAP, &reg32);
reg32 = (reg32 & hpp->adv_err_cap_and) | hpp->adv_err_cap_or;
pci_write_config_dword(dev, pos + PCI_ERR_CAP, reg32);
/*
* FIXME: The following two registers are not supported yet.
*
* o Secondary Uncorrectable Error Severity Register
* o Secondary Uncorrectable Error Mask Register
*/
}
/* Program PCIE MaxPayload setting on device: ensure parent maxpayload <= device */
static int pci_set_payload(struct pci_dev *dev)
{
int pos, ppos;
u16 pctl, psz;
u16 dctl, dsz, dcap, dmax;
struct pci_dev *parent;
parent = dev->bus->self;
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (!pos)
return 0;
/* Read Device MaxPayload capability and setting */
pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &dctl);
pci_read_config_word(dev, pos + PCI_EXP_DEVCAP, &dcap);
dsz = (dctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
dmax = (dcap & PCI_EXP_DEVCAP_PAYLOAD);
/* Read Parent MaxPayload setting */
ppos = pci_find_capability(parent, PCI_CAP_ID_EXP);
if (!ppos)
return 0;
pci_read_config_word(parent, ppos + PCI_EXP_DEVCTL, &pctl);
psz = (pctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
/* If parent payload > device max payload -> error
* If parent payload > device payload -> set speed
* If parent payload <= device payload -> do nothing
*/
if (psz > dmax)
return -1;
else if (psz > dsz) {
dev_info(&dev->dev, "Setting MaxPayload to %d\n", 128 << psz);
pci_write_config_word(dev, pos + PCI_EXP_DEVCTL,
(dctl & ~PCI_EXP_DEVCTL_PAYLOAD) +
(psz << 5));
}
return 0;
}
void pci_configure_slot(struct pci_dev *dev)
{
struct pci_dev *cdev;
struct hotplug_params hpp;
int ret;
if (!(dev->hdr_type == PCI_HEADER_TYPE_NORMAL ||
(dev->hdr_type == PCI_HEADER_TYPE_BRIDGE &&
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
ret = pci_set_payload(dev);
if (ret)
dev_warn(&dev->dev, "could not set device max payload\n");
memset(&hpp, 0, sizeof(hpp));
ret = pci_get_hp_params(dev, &hpp);
if (ret)
dev_warn(&dev->dev, "no hotplug settings from platform\n");
program_hpp_type2(dev, hpp.t2);
program_hpp_type1(dev, hpp.t1);
program_hpp_type0(dev, hpp.t0);
if (dev->subordinate) {
list_for_each_entry(cdev, &dev->subordinate->devices,
bus_list)
pci_configure_slot(cdev);
}
}
EXPORT_SYMBOL_GPL(pci_configure_slot);