2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/Documentation/devicetree/bindings/clock/ti
Nishanth Menon b4be018921 CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies
MPU DPLL on OMAP5, DRA75x, DRA72x has a limitation on the maximum
frequency it can be locked at. Duty Cycle Correction circuit is used
to recover a correct duty cycle for achieving higher frequencies
(hardware internally switches output to M3 output(CLKOUTHIF) from M2
output (CLKOUT)).

So provide support to setup required data to handle Duty cycle by
the setting up the minimum frequency for DPLL. 1.4GHz is common
for all these devices and is based on Technical Reference Manual
information for OMAP5432((SWPU282U) chapter 3.6.3.3.1 "DPLLs Output
Clocks Parameters", and equivalent information from DRA75x, DRA72x
documentation(SPRUHP2E, SPRUHI2P).

Signed-off-by: Nishanth Menon <nm@ti.com>
[t-kristo@ti.com: updated for latest dpll init API call]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
2014-06-06 20:33:39 +03:00
..
apll.txt CLK: TI: APLL: add support for omap2 aplls 2014-05-28 12:30:02 +03:00
autoidle.txt CLK: TI: add autoidle support 2014-01-17 12:34:59 -08:00
clockdomain.txt CLK: TI: add support for clockdomain binding 2014-01-17 12:35:13 -08:00
composite.txt clk: ti: add composite clock support 2014-01-17 12:35:01 -08:00
divider.txt CLK: ti: add support for ti divider-clock 2014-01-17 12:35:04 -08:00
dpll.txt CLK: TI: dpll: support OMAP5 MPU DPLL that need special handling for higher frequencies 2014-06-06 20:33:39 +03:00
dra7-atl.txt dt:/bindings: DRA7 ATL (Audio Tracking Logic) clock bindings 2014-05-28 13:06:52 +03:00
fixed-factor-clock.txt clk: ti: add support for TI fixed factor clock 2014-01-17 12:35:07 -08:00
gate.txt CLK: TI: gate: fixed DT binding documentation bugs 2014-05-28 12:30:07 +03:00
interface.txt CLK: TI: interface: add support for omap2430 specific interface clock 2014-05-28 12:30:12 +03:00
mux.txt clk: ti: add support for basic mux clock 2014-01-17 12:35:17 -08:00