2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-04 19:34:17 +08:00
linux-next/drivers/bluetooth/btqcomsmd.c
Uwe Kleine-König bd2c4e56a7 Bluetooth: btqcomsmd: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-03-27 11:39:52 -04:00

231 lines
4.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016, Linaro Ltd.
* Copyright (c) 2015, Sony Mobile Communications Inc.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/rpmsg.h>
#include <linux/of.h>
#include <linux/soc/qcom/wcnss_ctrl.h>
#include <linux/platform_device.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
#include "btqca.h"
struct btqcomsmd {
struct hci_dev *hdev;
struct rpmsg_endpoint *acl_channel;
struct rpmsg_endpoint *cmd_channel;
};
static int btqcomsmd_recv(struct hci_dev *hdev, unsigned int type,
const void *data, size_t count)
{
struct sk_buff *skb;
/* Use GFP_ATOMIC as we're in IRQ context */
skb = bt_skb_alloc(count, GFP_ATOMIC);
if (!skb) {
hdev->stat.err_rx++;
return -ENOMEM;
}
hci_skb_pkt_type(skb) = type;
skb_put_data(skb, data, count);
return hci_recv_frame(hdev, skb);
}
static int btqcomsmd_acl_callback(struct rpmsg_device *rpdev, void *data,
int count, void *priv, u32 addr)
{
struct btqcomsmd *btq = priv;
btq->hdev->stat.byte_rx += count;
return btqcomsmd_recv(btq->hdev, HCI_ACLDATA_PKT, data, count);
}
static int btqcomsmd_cmd_callback(struct rpmsg_device *rpdev, void *data,
int count, void *priv, u32 addr)
{
struct btqcomsmd *btq = priv;
btq->hdev->stat.byte_rx += count;
return btqcomsmd_recv(btq->hdev, HCI_EVENT_PKT, data, count);
}
static int btqcomsmd_send(struct hci_dev *hdev, struct sk_buff *skb)
{
struct btqcomsmd *btq = hci_get_drvdata(hdev);
int ret;
switch (hci_skb_pkt_type(skb)) {
case HCI_ACLDATA_PKT:
ret = rpmsg_send(btq->acl_channel, skb->data, skb->len);
if (ret) {
hdev->stat.err_tx++;
break;
}
hdev->stat.acl_tx++;
hdev->stat.byte_tx += skb->len;
break;
case HCI_COMMAND_PKT:
ret = rpmsg_send(btq->cmd_channel, skb->data, skb->len);
if (ret) {
hdev->stat.err_tx++;
break;
}
hdev->stat.cmd_tx++;
hdev->stat.byte_tx += skb->len;
break;
default:
ret = -EILSEQ;
break;
}
if (!ret)
kfree_skb(skb);
return ret;
}
static int btqcomsmd_open(struct hci_dev *hdev)
{
return 0;
}
static int btqcomsmd_close(struct hci_dev *hdev)
{
return 0;
}
static int btqcomsmd_setup(struct hci_dev *hdev)
{
struct sk_buff *skb;
skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
if (IS_ERR(skb))
return PTR_ERR(skb);
kfree_skb(skb);
/* Devices do not have persistent storage for BD address. Retrieve
* it from the firmware node property.
*/
set_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks);
return 0;
}
static int btqcomsmd_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
{
int ret;
ret = qca_set_bdaddr_rome(hdev, bdaddr);
if (ret)
return ret;
/* The firmware stops responding for a while after setting the bdaddr,
* causing timeouts for subsequent commands. Sleep a bit to avoid this.
*/
usleep_range(1000, 10000);
return 0;
}
static int btqcomsmd_probe(struct platform_device *pdev)
{
struct btqcomsmd *btq;
struct hci_dev *hdev;
void *wcnss;
int ret;
btq = devm_kzalloc(&pdev->dev, sizeof(*btq), GFP_KERNEL);
if (!btq)
return -ENOMEM;
wcnss = dev_get_drvdata(pdev->dev.parent);
btq->acl_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_ACL",
btqcomsmd_acl_callback, btq);
if (IS_ERR(btq->acl_channel))
return PTR_ERR(btq->acl_channel);
btq->cmd_channel = qcom_wcnss_open_channel(wcnss, "APPS_RIVA_BT_CMD",
btqcomsmd_cmd_callback, btq);
if (IS_ERR(btq->cmd_channel)) {
ret = PTR_ERR(btq->cmd_channel);
goto destroy_acl_channel;
}
hdev = hci_alloc_dev();
if (!hdev) {
ret = -ENOMEM;
goto destroy_cmd_channel;
}
hci_set_drvdata(hdev, btq);
btq->hdev = hdev;
SET_HCIDEV_DEV(hdev, &pdev->dev);
hdev->bus = HCI_SMD;
hdev->open = btqcomsmd_open;
hdev->close = btqcomsmd_close;
hdev->send = btqcomsmd_send;
hdev->setup = btqcomsmd_setup;
hdev->set_bdaddr = btqcomsmd_set_bdaddr;
ret = hci_register_dev(hdev);
if (ret < 0)
goto hci_free_dev;
platform_set_drvdata(pdev, btq);
return 0;
hci_free_dev:
hci_free_dev(hdev);
destroy_cmd_channel:
rpmsg_destroy_ept(btq->cmd_channel);
destroy_acl_channel:
rpmsg_destroy_ept(btq->acl_channel);
return ret;
}
static void btqcomsmd_remove(struct platform_device *pdev)
{
struct btqcomsmd *btq = platform_get_drvdata(pdev);
hci_unregister_dev(btq->hdev);
hci_free_dev(btq->hdev);
rpmsg_destroy_ept(btq->cmd_channel);
rpmsg_destroy_ept(btq->acl_channel);
}
static const struct of_device_id btqcomsmd_of_match[] = {
{ .compatible = "qcom,wcnss-bt", },
{ },
};
MODULE_DEVICE_TABLE(of, btqcomsmd_of_match);
static struct platform_driver btqcomsmd_driver = {
.probe = btqcomsmd_probe,
.remove_new = btqcomsmd_remove,
.driver = {
.name = "btqcomsmd",
.of_match_table = btqcomsmd_of_match,
},
};
module_platform_driver(btqcomsmd_driver);
MODULE_AUTHOR("Bjorn Andersson <bjorn.andersson@sonymobile.com>");
MODULE_DESCRIPTION("Qualcomm SMD HCI driver");
MODULE_LICENSE("GPL v2");