2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
linux-next/drivers/ieee1394/highlevel.h
Stefan Richter 055a7da0bb ieee1394: video1394: reorder module init, prepare BKL removal
This prepares video1394 for removal of the BKL (big kernel lock):
It allows video1394_open() to be called while video1394_init_module()
is still in progress.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2008-07-14 13:06:02 +02:00

141 lines
5.2 KiB
C

#ifndef IEEE1394_HIGHLEVEL_H
#define IEEE1394_HIGHLEVEL_H
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/types.h>
struct module;
#include "ieee1394_types.h"
struct hpsb_host;
/* internal to ieee1394 core */
struct hpsb_address_serve {
struct list_head host_list; /* per host list */
struct list_head hl_list; /* hpsb_highlevel list */
struct hpsb_address_ops *op;
struct hpsb_host *host;
u64 start; /* first address handled, quadlet aligned */
u64 end; /* first address behind, quadlet aligned */
};
/* Only the following structures are of interest to actual highlevel drivers. */
struct hpsb_highlevel {
const char *name;
/* Any of the following pointers can legally be NULL. */
/* New host initialized. Will also be called during
* hpsb_register_highlevel for all hosts already installed. */
void (*add_host)(struct hpsb_host *host);
/* Host about to be removed. Will also be called during
* hpsb_unregister_highlevel once for each host. */
void (*remove_host)(struct hpsb_host *host);
/* Host experienced bus reset with possible configuration changes.
* Note that this one may occur during interrupt/bottom half handling.
* You can not expect to be able to do stock hpsb_reads. */
void (*host_reset)(struct hpsb_host *host);
/* A write request was received on either the FCP_COMMAND (direction =
* 0) or the FCP_RESPONSE (direction = 1) register. The cts arg
* contains the cts field (first byte of data). */
void (*fcp_request)(struct hpsb_host *host, int nodeid, int direction,
int cts, u8 *data, size_t length);
/* These are initialized by the subsystem when the
* hpsb_higlevel is registered. */
struct list_head hl_list;
struct list_head irq_list;
struct list_head addr_list;
struct list_head host_info_list;
rwlock_t host_info_lock;
};
struct hpsb_address_ops {
/*
* Null function pointers will make the respective operation complete
* with RCODE_TYPE_ERROR. Makes for easy to implement read-only
* registers (just leave everything but read NULL).
*
* All functions shall return appropriate IEEE 1394 rcodes.
*/
/* These functions have to implement block reads for themselves.
*
* These functions either return a response code or a negative number.
* In the first case a response will be generated. In the latter case,
* no response will be sent and the driver which handled the request
* will send the response itself. */
int (*read)(struct hpsb_host *host, int nodeid, quadlet_t *buffer,
u64 addr, size_t length, u16 flags);
int (*write)(struct hpsb_host *host, int nodeid, int destid,
quadlet_t *data, u64 addr, size_t length, u16 flags);
/* Lock transactions: write results of ext_tcode operation into
* *store. */
int (*lock)(struct hpsb_host *host, int nodeid, quadlet_t *store,
u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
u16 flags);
int (*lock64)(struct hpsb_host *host, int nodeid, octlet_t *store,
u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
u16 flags);
};
void highlevel_add_host(struct hpsb_host *host);
void highlevel_remove_host(struct hpsb_host *host);
void highlevel_host_reset(struct hpsb_host *host);
int highlevel_read(struct hpsb_host *host, int nodeid, void *data, u64 addr,
unsigned int length, u16 flags);
int highlevel_write(struct hpsb_host *host, int nodeid, int destid, void *data,
u64 addr, unsigned int length, u16 flags);
int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
u16 flags);
int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store,
u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
u16 flags);
void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
void *data, size_t length);
/**
* hpsb_init_highlevel - initialize a struct hpsb_highlevel
*
* This is only necessary if hpsb_get_hostinfo_bykey can be called
* before hpsb_register_highlevel.
*/
static inline void hpsb_init_highlevel(struct hpsb_highlevel *hl)
{
rwlock_init(&hl->host_info_lock);
INIT_LIST_HEAD(&hl->host_info_list);
}
void hpsb_register_highlevel(struct hpsb_highlevel *hl);
void hpsb_unregister_highlevel(struct hpsb_highlevel *hl);
u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl,
struct hpsb_host *host,
struct hpsb_address_ops *ops,
u64 size, u64 alignment,
u64 start, u64 end);
int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
struct hpsb_address_ops *ops, u64 start, u64 end);
int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
u64 start);
void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
void *hpsb_create_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
size_t data_size);
void hpsb_destroy_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host,
unsigned long key);
void *hpsb_get_hostinfo_bykey(struct hpsb_highlevel *hl, unsigned long key);
int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
void *data);
#endif /* IEEE1394_HIGHLEVEL_H */