2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/arch/arm/mach-pxa/e400.c
Russell King cc155c6f2c [ARM] pxa: allow platforms to control which uarts are registered
For some platforms, it is inappropriate to register all PXA UARTs.
In some cases, the UARTs may not be used, and in others we may want
to avoid registering the UARTs to allow other drivers (eg, FICP) to
make use of the UART.

In addition, a while back there was a request to be able to pass
platform data to the UART driver.

This patch enables all of this by providing functions platforms can
call to register each individual UART.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-12-01 09:02:55 +08:00

156 lines
3.7 KiB
C

/*
* Hardware definitions for the Toshiba eseries PDAs
*
* Copyright (c) 2003 Ian Molton <spyro@f2s.com>
*
* This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/platform_device.h>
#include <linux/mfd/t7l66xb.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/pxa25x.h>
#include <mach/eseries-gpio.h>
#include <mach/pxafb.h>
#include <mach/udc.h>
#include <mach/irqs.h>
#include "generic.h"
#include "eseries.h"
#include "clock.h"
/* ------------------------ E400 LCD definitions ------------------------ */
static struct pxafb_mode_info e400_pxafb_mode_info = {
.pixclock = 140703,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 28,
.right_margin = 8,
.vsync_len = 3,
.upper_margin = 5,
.lower_margin = 6,
.sync = 0,
};
static struct pxafb_mach_info e400_pxafb_mach_info = {
.modes = &e400_pxafb_mode_info,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP,
.lccr3 = 0,
.pxafb_backlight_power = NULL,
};
/* ------------------------ E400 MFP config ----------------------------- */
static unsigned long e400_pin_config[] __initdata = {
/* Chip selects */
GPIO15_nCS_1, /* CS1 - Flash */
GPIO80_nCS_4, /* CS4 - TMIO */
/* Clocks */
GPIO12_32KHz,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
/* TMIO controller */
GPIO19_GPIO, /* t7l66xb #PCLR */
GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
/* wakeup */
GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
};
/* ---------------------------------------------------------------------- */
static struct mtd_partition partition_a = {
.name = "Internal NAND flash",
.offset = 0,
.size = MTDPART_SIZ_FULL,
};
static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
.options = 0,
.offs = 4,
.len = 2,
.pattern = scan_ff_pattern
};
static struct tmio_nand_data e400_t7l66xb_nand_config = {
.num_partitions = 1,
.partition = &partition_a,
.badblock_pattern = &e400_t7l66xb_nand_bbt,
};
static struct t7l66xb_platform_data e400_t7l66xb_info = {
.irq_base = IRQ_BOARD_START,
.enable = &eseries_tmio_enable,
.suspend = &eseries_tmio_suspend,
.resume = &eseries_tmio_resume,
.nand_data = &e400_t7l66xb_nand_config,
};
static struct platform_device e400_t7l66xb_device = {
.name = "t7l66xb",
.id = -1,
.dev = {
.platform_data = &e400_t7l66xb_info,
},
.num_resources = 2,
.resource = eseries_tmio_resources,
};
/* ---------------------------------------------------------- */
static struct platform_device *devices[] __initdata = {
&e400_t7l66xb_device,
};
static void __init e400_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
/* Fixme - e400 may have a switched clock */
eseries_register_clks();
eseries_get_tmio_gpios();
set_pxa_fb_info(&e400_pxafb_mach_info);
platform_add_devices(devices, ARRAY_SIZE(devices));
pxa_set_udc_info(&e7xx_udc_mach_info);
}
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa25x_init_irq,
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
MACHINE_END