Emil Tantilov 98508c9300 ixgbe: add LED blink code for x540 ... Implement blink_led_start and blink_led_stop functions for x540 using the MACC register. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Evan Swanson <evan.swanson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2011-04-27 02:12:01 -07:00
..
ixgbe_82598.c	ixgbe: DCB, misallocated packet buffer size with X540 device	2011-04-13 19:26:43 -07:00
ixgbe_82599.c	ixgbe: add support for 64k EEPROM for 82599	2011-04-27 02:10:12 -07:00
ixgbe_common.c	ixgbe: make device_caps() generic	2011-04-13 19:26:06 -07:00
ixgbe_common.h	ixgbe: make device_caps() generic	2011-04-13 19:26:06 -07:00
ixgbe_dcb_82598.c	ixgbe: DCB, PFC not cleared until reset occurs	2011-03-12 04:15:35 -08:00
ixgbe_dcb_82598.h	ixgbe: cleanup copyright string for 2011	2011-03-03 04:43:24 -08:00
ixgbe_dcb_82599.c	ixgbe: DCB, X540 devices do not respond to pause frames	2011-04-13 19:27:18 -07:00
ixgbe_dcb_82599.h	ixgbe: DCB, misallocated packet buffer size with X540 device	2011-04-13 19:26:43 -07:00
ixgbe_dcb_nl.c	ixgbe: cleanup short msleep's (<20ms) to use usleep_range	2011-04-13 19:23:11 -07:00
ixgbe_dcb.c	Fix common misspellings	2011-03-31 11:26:23 -03:00
ixgbe_dcb.h	ixgbe: IEEE 802.1Qaz, implement priority assignment table	2011-03-12 04:12:54 -08:00
ixgbe_ethtool.c	ixgbe: cleanup short msleep's (<20ms) to use usleep_range	2011-04-13 19:23:11 -07:00
ixgbe_fcoe.c	ixgbe: DCB remove ixgbe_fcoe_getapp routine	2011-03-12 04:11:11 -08:00
ixgbe_fcoe.h	ixgbe: add support to FCoE DDP in target mode	2011-03-07 18:04:35 -08:00
ixgbe_main.c	ixgbe: add support for new HW	2011-04-13 19:24:38 -07:00
ixgbe_mbx.c	ixgbe: remove timer reset to 0 on timeout	2011-03-12 04:13:41 -08:00
ixgbe_mbx.h	ixgbe: register defines cleanup	2011-04-27 02:08:50 -07:00
ixgbe_phy.c	ixgbe: explicitly disable 100H for x540	2011-04-27 02:07:31 -07:00
ixgbe_phy.h	ixgbe: update PHY code to support 100Mbps as well as 1G/10G	2011-03-12 04:14:01 -08:00
ixgbe_sriov.c	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_sriov.h	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
ixgbe_type.h	ixgbe: register defines cleanup	2011-04-27 02:08:50 -07:00
ixgbe_x540.c	ixgbe: add LED blink code for x540	2011-04-27 02:12:01 -07:00
ixgbe.h	ixgbe: add support for VF Transmit rate limit using iproute2	2011-03-12 04:15:08 -08:00
Makefile	ixgbe: add MAC and PHY support for x540	2010-11-16 19:27:16 -08:00