renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 09:13:55 +08:00
Code
9800f24f7b
linux-next/drivers/media/i2c/rdacm21.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void 
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

647 lines
15 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* IMI RDACM21 GMSL Camera Driver
*
* Copyright (C) 2017-2020 Jacopo Mondi
* Copyright (C) 2017-2019 Kieran Bingham
* Copyright (C) 2017-2019 Laurent Pinchart
* Copyright (C) 2017-2019 Niklas Söderlund
* Copyright (C) 2016 Renesas Electronics Corporation
* Copyright (C) 2015 Cogent Embedded, Inc.
*/
#include <linux/delay.h>
#include <linux/fwnode.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>
#include "max9271.h"
#define MAX9271_RESET_CYCLES 10
#define OV490_I2C_ADDRESS 0x24
#define OV490_PAGE_HIGH_REG 0xfffd
#define OV490_PAGE_LOW_REG 0xfffe
/*
* The SCCB slave handling is undocumented; the registers naming scheme is
* totally arbitrary.
*/
#define OV490_SCCB_SLAVE_WRITE 0x00
#define OV490_SCCB_SLAVE_READ 0x01
#define OV490_SCCB_SLAVE0_DIR 0x80195000
#define OV490_SCCB_SLAVE0_ADDR_HIGH 0x80195001
#define OV490_SCCB_SLAVE0_ADDR_LOW 0x80195002
#define OV490_DVP_CTRL3 0x80286009
#define OV490_ODS_CTRL_FRAME_OUTPUT_EN 0x0c
#define OV490_ODS_CTRL 0x8029d000
#define OV490_HOST_CMD 0x808000c0
#define OV490_HOST_CMD_TRIGGER 0xc1
#define OV490_ID_VAL 0x0490
#define OV490_ID(_p, _v) ((((_p) & 0xff) << 8) | ((_v) & 0xff))
#define OV490_PID 0x8080300a
#define OV490_VER 0x8080300b
#define OV490_PID_TIMEOUT 20
#define OV490_OUTPUT_EN_TIMEOUT 300
#define OV490_GPIO0 BIT(0)
#define OV490_SPWDN0 BIT(0)
#define OV490_GPIO_SEL0 0x80800050
#define OV490_GPIO_SEL1 0x80800051
#define OV490_GPIO_DIRECTION0 0x80800054
#define OV490_GPIO_DIRECTION1 0x80800055
#define OV490_GPIO_OUTPUT_VALUE0 0x80800058
#define OV490_GPIO_OUTPUT_VALUE1 0x80800059
#define OV490_ISP_HSIZE_LOW 0x80820060
#define OV490_ISP_HSIZE_HIGH 0x80820061
#define OV490_ISP_VSIZE_LOW 0x80820062
#define OV490_ISP_VSIZE_HIGH 0x80820063
#define OV10640_PID_TIMEOUT 20
#define OV10640_ID_HIGH 0xa6
#define OV10640_CHIP_ID 0x300a
#define OV10640_PIXEL_RATE 55000000
struct rdacm21_device {
struct device *dev;
struct max9271_device serializer;
struct i2c_client *isp;
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_mbus_framefmt fmt;
struct v4l2_ctrl_handler ctrls;
u32 addrs[2];
u16 last_page;
};
static inline struct rdacm21_device *sd_to_rdacm21(struct v4l2_subdev *sd)
{
return container_of(sd, struct rdacm21_device, sd);
}
static const struct ov490_reg {
u16 reg;
u8 val;
} ov490_regs_wizard[] = {
{0xfffd, 0x80},
{0xfffe, 0x82},
{0x0071, 0x11},
{0x0075, 0x11},
{0xfffe, 0x29},
{0x6010, 0x01},
/*
* OV490 EMB line disable in YUV and RAW data,
* NOTE: EMB line is still used in ISP and sensor
*/
{0xe000, 0x14},
{0xfffe, 0x28},
{0x6000, 0x04},
{0x6004, 0x00},
/*
* PCLK polarity - useless due to silicon bug.
* Use 0x808000bb register instead.
*/
{0x6008, 0x00},
{0xfffe, 0x80},
{0x0091, 0x00},
/* bit[3]=0 - PCLK polarity workaround. */
{0x00bb, 0x1d},
/* Ov490 FSIN: app_fsin_from_fsync */
{0xfffe, 0x85},
{0x0008, 0x00},
{0x0009, 0x01},
/* FSIN0 source. */
{0x000A, 0x05},
{0x000B, 0x00},
/* FSIN0 delay. */
{0x0030, 0x02},
{0x0031, 0x00},
{0x0032, 0x00},
{0x0033, 0x00},
/* FSIN1 delay. */
{0x0038, 0x02},
{0x0039, 0x00},
{0x003A, 0x00},
{0x003B, 0x00},
/* FSIN0 length. */
{0x0070, 0x2C},
{0x0071, 0x01},
{0x0072, 0x00},
{0x0073, 0x00},
/* FSIN1 length. */
{0x0074, 0x64},
{0x0075, 0x00},
{0x0076, 0x00},
{0x0077, 0x00},
{0x0000, 0x14},
{0x0001, 0x00},
{0x0002, 0x00},
{0x0003, 0x00},
/*
* Load fsin0,load fsin1,load other,
* It will be cleared automatically.
*/
{0x0004, 0x32},
{0x0005, 0x00},
{0x0006, 0x00},
{0x0007, 0x00},
{0xfffe, 0x80},
/* Sensor FSIN. */
{0x0081, 0x00},
/* ov10640 FSIN enable */
{0xfffe, 0x19},
{0x5000, 0x00},
{0x5001, 0x30},
{0x5002, 0x8c},
{0x5003, 0xb2},
{0xfffe, 0x80},
{0x00c0, 0xc1},
/* ov10640 HFLIP=1 by default */
{0xfffe, 0x19},
{0x5000, 0x01},
{0x5001, 0x00},
{0xfffe, 0x80},
{0x00c0, 0xdc},
};
static int ov490_read(struct rdacm21_device *dev, u16 reg, u8 *val)
{
u8 buf[2] = { reg >> 8, reg };
int ret;
ret = i2c_master_send(dev->isp, buf, 2);
if (ret == 2)
ret = i2c_master_recv(dev->isp, val, 1);
if (ret < 0) {
dev_dbg(dev->dev, "%s: register 0x%04x read failed (%d)\n",
__func__, reg, ret);
return ret;
}
return 0;
}
static int ov490_write(struct rdacm21_device *dev, u16 reg, u8 val)
{
u8 buf[3] = { reg >> 8, reg, val };
int ret;
ret = i2c_master_send(dev->isp, buf, 3);
if (ret < 0) {
dev_err(dev->dev, "%s: register 0x%04x write failed (%d)\n",
__func__, reg, ret);
return ret;
}
return 0;
}
static int ov490_set_page(struct rdacm21_device *dev, u16 page)
{
u8 page_high = page >> 8;
u8 page_low = page;
int ret;
if (page == dev->last_page)
return 0;
if (page_high != (dev->last_page >> 8)) {
ret = ov490_write(dev, OV490_PAGE_HIGH_REG, page_high);
if (ret)
return ret;
}
if (page_low != (u8)dev->last_page) {
ret = ov490_write(dev, OV490_PAGE_LOW_REG, page_low);
if (ret)
return ret;
}
dev->last_page = page;
usleep_range(100, 150);
return 0;
}
static int ov490_read_reg(struct rdacm21_device *dev, u32 reg, u8 *val)
{
int ret;
ret = ov490_set_page(dev, reg >> 16);
if (ret)
return ret;
ret = ov490_read(dev, (u16)reg, val);
if (ret)
return ret;
dev_dbg(dev->dev, "%s: 0x%08x = 0x%02x\n", __func__, reg, *val);
return 0;
}
static int ov490_write_reg(struct rdacm21_device *dev, u32 reg, u8 val)
{
int ret;
ret = ov490_set_page(dev, reg >> 16);
if (ret)
return ret;
ret = ov490_write(dev, (u16)reg, val);
if (ret)
return ret;
dev_dbg(dev->dev, "%s: 0x%08x = 0x%02x\n", __func__, reg, val);
return 0;
}
static int rdacm21_s_stream(struct v4l2_subdev *sd, int enable)
{
struct rdacm21_device *dev = sd_to_rdacm21(sd);
/*
* Enable serial link now that the ISP provides a valid pixel clock
* to start serializing video data on the GMSL link.
*/
return max9271_set_serial_link(&dev->serializer, enable);
}
static int rdacm21_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
if (code->pad || code->index > 0)
return -EINVAL;
code->code = MEDIA_BUS_FMT_YUYV8_1X16;
return 0;
}
static int rdacm21_get_fmt(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *format)
{
struct v4l2_mbus_framefmt *mf = &format->format;
struct rdacm21_device *dev = sd_to_rdacm21(sd);
if (format->pad)
return -EINVAL;
mf->width = dev->fmt.width;
mf->height = dev->fmt.height;
mf->code = MEDIA_BUS_FMT_YUYV8_1X16;
mf->colorspace = V4L2_COLORSPACE_SRGB;
mf->field = V4L2_FIELD_NONE;
mf->ycbcr_enc = V4L2_YCBCR_ENC_601;
mf->quantization = V4L2_QUANTIZATION_FULL_RANGE;
mf->xfer_func = V4L2_XFER_FUNC_NONE;
return 0;
}
static const struct v4l2_subdev_video_ops rdacm21_video_ops = {
.s_stream = rdacm21_s_stream,
};
static const struct v4l2_subdev_pad_ops rdacm21_subdev_pad_ops = {
.enum_mbus_code = rdacm21_enum_mbus_code,
.get_fmt = rdacm21_get_fmt,
.set_fmt = rdacm21_get_fmt,
};
static const struct v4l2_subdev_ops rdacm21_subdev_ops = {
.video = &rdacm21_video_ops,
.pad = &rdacm21_subdev_pad_ops,
};
static void ov10640_power_up(struct rdacm21_device *dev)
{
/* Enable GPIO0#0 (reset) and GPIO1#0 (pwdn) as output lines. */
ov490_write_reg(dev, OV490_GPIO_SEL0, OV490_GPIO0);
ov490_write_reg(dev, OV490_GPIO_SEL1, OV490_SPWDN0);
ov490_write_reg(dev, OV490_GPIO_DIRECTION0, OV490_GPIO0);
ov490_write_reg(dev, OV490_GPIO_DIRECTION1, OV490_SPWDN0);
/* Power up OV10640 and then reset it. */
ov490_write_reg(dev, OV490_GPIO_OUTPUT_VALUE1, OV490_SPWDN0);
usleep_range(1500, 3000);
ov490_write_reg(dev, OV490_GPIO_OUTPUT_VALUE0, 0x00);
usleep_range(1500, 3000);
ov490_write_reg(dev, OV490_GPIO_OUTPUT_VALUE0, OV490_GPIO0);
usleep_range(3000, 5000);
}
static int ov10640_check_id(struct rdacm21_device *dev)
{
unsigned int i;
u8 val;
/* Read OV10640 ID to test communications. */
for (i = 0; i < OV10640_PID_TIMEOUT; ++i) {
ov490_write_reg(dev, OV490_SCCB_SLAVE0_DIR,
OV490_SCCB_SLAVE_READ);
ov490_write_reg(dev, OV490_SCCB_SLAVE0_ADDR_HIGH,
OV10640_CHIP_ID >> 8);
ov490_write_reg(dev, OV490_SCCB_SLAVE0_ADDR_LOW,
OV10640_CHIP_ID & 0xff);
/*
* Trigger SCCB slave transaction and give it some time
* to complete.
*/
ov490_write_reg(dev, OV490_HOST_CMD, OV490_HOST_CMD_TRIGGER);
usleep_range(1000, 1500);
ov490_read_reg(dev, OV490_SCCB_SLAVE0_DIR, &val);
if (val == OV10640_ID_HIGH)
break;
usleep_range(1000, 1500);
}
if (i == OV10640_PID_TIMEOUT) {
dev_err(dev->dev, "OV10640 ID mismatch: (0x%02x)\n", val);
return -ENODEV;
}
dev_dbg(dev->dev, "OV10640 ID = 0x%2x\n", val);
return 0;
}
static int ov490_initialize(struct rdacm21_device *dev)
{
u8 pid, ver, val;
unsigned int i;
int ret;
ov10640_power_up(dev);
/*
* Read OV490 Id to test communications. Give it up to 40msec to
* exit from reset.
*/
for (i = 0; i < OV490_PID_TIMEOUT; ++i) {
ret = ov490_read_reg(dev, OV490_PID, &pid);
if (ret == 0)
break;
usleep_range(1000, 2000);
}
if (i == OV490_PID_TIMEOUT) {
dev_err(dev->dev, "OV490 PID read failed (%d)\n", ret);
return ret;
}
ret = ov490_read_reg(dev, OV490_VER, &ver);
if (ret < 0)
return ret;
if (OV490_ID(pid, ver) != OV490_ID_VAL) {
dev_err(dev->dev, "OV490 ID mismatch (0x%04x)\n",
OV490_ID(pid, ver));
return -ENODEV;
}
/* Wait for firmware boot by reading streamon status. */
for (i = 0; i < OV490_OUTPUT_EN_TIMEOUT; ++i) {
ov490_read_reg(dev, OV490_ODS_CTRL, &val);
if (val == OV490_ODS_CTRL_FRAME_OUTPUT_EN)
break;
usleep_range(1000, 2000);
}
if (i == OV490_OUTPUT_EN_TIMEOUT) {
dev_err(dev->dev, "Timeout waiting for firmware boot\n");
return -ENODEV;
}
ret = ov10640_check_id(dev);
if (ret)
return ret;
/* Program OV490 with register-value table. */
for (i = 0; i < ARRAY_SIZE(ov490_regs_wizard); ++i) {
ret = ov490_write(dev, ov490_regs_wizard[i].reg,
ov490_regs_wizard[i].val);
if (ret < 0) {
dev_err(dev->dev,
"%s: register %u (0x%04x) write failed (%d)\n",
__func__, i, ov490_regs_wizard[i].reg, ret);
return -EIO;
}
usleep_range(100, 150);
}
/*
* The ISP is programmed with the content of a serial flash memory.
* Read the firmware configuration to reflect it through the V4L2 APIs.
*/
ov490_read_reg(dev, OV490_ISP_HSIZE_HIGH, &val);
dev->fmt.width = (val & 0xf) << 8;
ov490_read_reg(dev, OV490_ISP_HSIZE_LOW, &val);
dev->fmt.width |= (val & 0xff);
ov490_read_reg(dev, OV490_ISP_VSIZE_HIGH, &val);
dev->fmt.height = (val & 0xf) << 8;
ov490_read_reg(dev, OV490_ISP_VSIZE_LOW, &val);
dev->fmt.height |= val & 0xff;
/* Set bus width to 12 bits with [0:11] ordering. */
ov490_write_reg(dev, OV490_DVP_CTRL3, 0x10);
dev_info(dev->dev, "Identified RDACM21 camera module\n");
return 0;
}
static int rdacm21_initialize(struct rdacm21_device *dev)
{
int ret;
max9271_wake_up(&dev->serializer);
/* Enable reverse channel and disable the serial link. */
ret = max9271_set_serial_link(&dev->serializer, false);
if (ret)
return ret;
/* Configure I2C bus at 105Kbps speed and configure GMSL. */
ret = max9271_configure_i2c(&dev->serializer,
MAX9271_I2CSLVSH_469NS_234NS |
MAX9271_I2CSLVTO_1024US |
MAX9271_I2CMSTBT_105KBPS);
if (ret)
return ret;
ret = max9271_verify_id(&dev->serializer);
if (ret)
return ret;
/*
* Enable GPIO1 and hold OV490 in reset during max9271 configuration.
* The reset signal has to be asserted for at least 250 useconds.
*/
ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(250, 500);
ret = max9271_configure_gmsl_link(&dev->serializer);
if (ret)
return ret;
ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
if (ret)
return ret;
dev->serializer.client->addr = dev->addrs[0];
ret = max9271_set_translation(&dev->serializer, dev->addrs[1],
OV490_I2C_ADDRESS);
if (ret)
return ret;
dev->isp->addr = dev->addrs[1];
/* Release OV490 from reset and initialize it. */
ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
if (ret)
return ret;
usleep_range(3000, 5000);
ret = ov490_initialize(dev);
if (ret)
return ret;
/*
* Set reverse channel high threshold to increase noise immunity.
*
* This should be compensated by increasing the reverse channel
* amplitude on the remote deserializer side.
*/
return max9271_set_high_threshold(&dev->serializer, true);
}
static int rdacm21_probe(struct i2c_client *client)
{
struct rdacm21_device *dev;
struct fwnode_handle *ep;
int ret;
dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->dev = &client->dev;
dev->serializer.client = client;
ret = of_property_read_u32_array(client->dev.of_node, "reg",
dev->addrs, 2);
if (ret < 0) {
dev_err(dev->dev, "Invalid DT reg property: %d\n", ret);
return -EINVAL;
}
/* Create the dummy I2C client for the sensor. */
dev->isp = i2c_new_dummy_device(client->adapter, OV490_I2C_ADDRESS);
if (IS_ERR(dev->isp))
return PTR_ERR(dev->isp);
ret = rdacm21_initialize(dev);
if (ret < 0)
goto error;
/* Initialize and register the subdevice. */
v4l2_i2c_subdev_init(&dev->sd, client, &rdacm21_subdev_ops);
dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
v4l2_ctrl_handler_init(&dev->ctrls, 1);
v4l2_ctrl_new_std(&dev->ctrls, NULL, V4L2_CID_PIXEL_RATE,
OV10640_PIXEL_RATE, OV10640_PIXEL_RATE, 1,
OV10640_PIXEL_RATE);
dev->sd.ctrl_handler = &dev->ctrls;
ret = dev->ctrls.error;
if (ret)
goto error_free_ctrls;
dev->pad.flags = MEDIA_PAD_FL_SOURCE;
dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
if (ret < 0)
goto error_free_ctrls;
ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
if (!ep) {
dev_err(&client->dev,
"Unable to get endpoint in node %pOF\n",
client->dev.of_node);
ret = -ENOENT;
goto error_free_ctrls;
}
dev->sd.fwnode = ep;
ret = v4l2_async_register_subdev(&dev->sd);
if (ret)
goto error_put_node;
return 0;
error_put_node:
fwnode_handle_put(dev->sd.fwnode);
error_free_ctrls:
v4l2_ctrl_handler_free(&dev->ctrls);
error:
i2c_unregister_device(dev->isp);
return ret;
}
static void rdacm21_remove(struct i2c_client *client)
{
struct rdacm21_device *dev = sd_to_rdacm21(i2c_get_clientdata(client));
v4l2_async_unregister_subdev(&dev->sd);
v4l2_ctrl_handler_free(&dev->ctrls);
i2c_unregister_device(dev->isp);
fwnode_handle_put(dev->sd.fwnode);
}
static const struct of_device_id rdacm21_of_ids[] = {
{ .compatible = "imi,rdacm21" },
{ }
};
MODULE_DEVICE_TABLE(of, rdacm21_of_ids);
static struct i2c_driver rdacm21_i2c_driver = {
.driver = {
.name = "rdacm21",
.of_match_table = rdacm21_of_ids,
},
.probe_new = rdacm21_probe,
.remove = rdacm21_remove,
};
module_i2c_driver(rdacm21_i2c_driver);
MODULE_DESCRIPTION("GMSL Camera driver for RDACM21");
MODULE_AUTHOR("Jacopo Mondi");
MODULE_LICENSE("GPL v2");
View Git Blame Copy Permalink