Avri Altman bc47e2f6f9 mmc: core: Add discard support to sd ... SD spec v5.1 adds discard support. The flows and commands are similar to mmc, so just set the discard arg in CMD38. A host which supports DISCARD shall check if the DISCARD_SUPPORT (b313) is set in the SD_STATUS register. If the card does not support discard, the host shall not issue DISCARD command, but ERASE command instead. Post the DISCARD operation, the card may de-allocate the discarded blocks partially or completely. So the host mustn't make any assumptions concerning the content of the discarded region. This is unlike ERASE command, in which the region is guaranteed to contain either '0's or '1's, depends on the content of DATA_STAT_AFTER_ERASE (b55) in the scr register. One more important difference compared to ERASE is the busy timeout which we will address on the next patch. Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>		2019-02-28 09:16:12 +01:00
..
card.h	mmc: core: Indicate SD specs higher than 4.0	2019-02-25 08:40:58 +01:00
core.h	mmc: core: Export a function mmc_sw_reset() to allow soft reset of cards	2018-05-08 09:33:42 +02:00
host.h	mmc: core: Convert mmc_regulator_get_ocrmask() to static	2019-02-25 15:20:58 +01:00
mmc.h	mmc: core: Adjust and reuse the macro of R1_STATUS(x)	2018-07-16 11:21:45 +02:00
pm.h
sd.h	mmc: core: Add discard support to sd	2019-02-28 09:16:12 +01:00
sdhci-pci-data.h	MMC core:	2017-11-13 10:17:35 -08:00
sdio_func.h	mmc: sdio: fix alignment issue in struct sdio_func	2017-04-18 19:18:07 +02:00
sdio_ids.h	brcmfmac: add support for CYW43012 SDIO chipset	2018-12-13 16:57:17 +02:00
sdio.h
sh_mmcif.h	mmc: sh_mmcif: Remove unused clk_ctrl2_present from the platform data	2017-02-13 13:19:58 +01:00
slot-gpio.h	mmc: slot-gpio: Remove override_active_level on WP	2019-02-25 08:40:58 +01:00