Alexander Duyck 96be80abaf ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6 ... The original fix that was applied for setting gso_type required more change than necessary because it was assumed ixgbe does RSC on IPv6 frames and this is not correct. RSC is only supported with IPv4/TCP frames only. As such we can simplify the fix and avoid the unnecessary move of eth_type_trans. The previous patch "ixgbe: fix gso type" and this patch reduce the entire fix to one line that sets gso_type to TCPV4 if the frame is RSC. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2013-02-12 16:07:19 -05:00
..
ixgbe_82598.c	ixgbe: Update link flow control to correctly handle multiple packet buffer DCB	2012-05-04 03:25:24 -07:00
ixgbe_82599.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_common.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_common.h	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe_dcb_82598.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82598.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_82599.c	ixgbe: Clean up priority based flow control	2012-05-09 22:15:40 -07:00
ixgbe_dcb_82599.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_dcb_nl.c	ixgbe: Populate the prio_tc_map in ixgbe_setup_tc	2012-07-14 14:29:19 -07:00
ixgbe_dcb.c	ixgbe: Use num_tcs.pg_tcs as upper limit for TC when checking based on UP	2012-07-21 16:05:28 -07:00
ixgbe_dcb.h	ixgbe: Populate the prio_tc_map in ixgbe_setup_tc	2012-07-14 14:29:19 -07:00
ixgbe_debugfs.c	ixgbe: only compile ixgbe_debugfs.o when enabled	2013-01-16 00:21:08 -08:00
ixgbe_ethtool.c	ixgbe: ethtool correctly identify autoneg setting	2012-11-22 01:39:43 -08:00
ixgbe_fcoe.c	ixgbe: Enable jumbo frames support w/ SR-IOV	2012-10-19 04:04:14 -07:00
ixgbe_fcoe.h	ixgbe: Make FCoE allocation and configuration closer to how rings work	2012-07-19 18:18:49 -07:00
ixgbe_lib.c	ixgbe: fix default setting of TXDCTL.WTHRESH	2012-11-01 02:00:10 -07:00
ixgbe_main.c	ixgbe: Only set gso_type to SKB_GSO_TCPV4 as RSC does not support IPv6	2013-02-12 16:07:19 -05:00
ixgbe_mbx.c	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_mbx.h	ixgbe: Add support for GET_QUEUES message to get DCB configuration	2012-10-22 21:14:54 -07:00
ixgbe_phy.c	ixgbe: add support for 1G SX modules	2012-06-20 01:37:04 -07:00
ixgbe_phy.h	ixgbe: update copyright to 2012	2012-02-03 03:05:30 -08:00
ixgbe_ptp.c	ixgbe: Fix overwriting of rx_mtrl in ixgbe_ptp_hwtstamp_ioctl	2013-01-16 00:37:07 -08:00
ixgbe_sriov.c	ixgbe: Make the bridge mode setting sticky	2012-11-28 04:46:11 -08:00
ixgbe_sriov.h	ixgbe: Change how we check for pre-existing and assigned VFs	2012-07-21 16:02:56 -07:00
ixgbe_sysfs.c	drivers/net/ethernet: Fix (nearly-)kernel-doc comments for various functions	2012-07-10 23:13:46 -07:00
ixgbe_type.h	ixgbe: check whether thermal sensor is enabled.	2012-12-06 21:38:38 -08:00
ixgbe_x540.c	ixgbe: Use is_valid_ether_addr	2012-12-06 21:31:06 -08:00
ixgbe.h	ixgbe: Make the bridge mode setting sticky	2012-11-28 04:46:11 -08:00
Makefile	ixgbe: only compile ixgbe_debugfs.o when enabled	2013-01-16 00:21:08 -08:00