2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/drivers/net/ethernet/mellanox/mlx4/catas.c
Kleber Sacilotto de Souza 57dbf29a54 mlx4: Add support for EEH error recovery
Currently the mlx4 drivers don't have the necessary callbacks to
implement EEH errors detection and recovery, so the PCI layer uses the
probe and remove callbacks to try to recover the device after an error on
the bus. However, these callbacks have race conditions with the internal
catastrophic error recovery functions, which will also detect the error
and this can cause the system to crash if both EEH and catas functions
try to reset the device.

This patch adds the necessary error recovery callbacks and makes sure
that the internal catastrophic error functions will not try to reset the
device in such scenarios. It also adds some calls to
pci_channel_offline() to suppress reads/writes on the bus when the slot
cannot accept I/O operations so we prevent unnecessary accesses to the
bus and speed up the device removal.

Signed-off-by: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Acked-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-25 15:24:13 -07:00

172 lines
4.8 KiB
C

/*
* Copyright (c) 2007 Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2007, 2008 Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/workqueue.h>
#include <linux/module.h>
#include "mlx4.h"
enum {
MLX4_CATAS_POLL_INTERVAL = 5 * HZ,
};
static DEFINE_SPINLOCK(catas_lock);
static LIST_HEAD(catas_list);
static struct work_struct catas_work;
static int internal_err_reset = 1;
module_param(internal_err_reset, int, 0644);
MODULE_PARM_DESC(internal_err_reset,
"Reset device on internal errors if non-zero"
" (default 1, in SRIOV mode default is 0)");
static void dump_err_buf(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
int i;
mlx4_err(dev, "Internal error detected:\n");
for (i = 0; i < priv->fw.catas_size; ++i)
mlx4_err(dev, " buf[%02x]: %08x\n",
i, swab32(readl(priv->catas_err.map + i)));
}
static void poll_catas(unsigned long dev_ptr)
{
struct mlx4_dev *dev = (struct mlx4_dev *) dev_ptr;
struct mlx4_priv *priv = mlx4_priv(dev);
if (readl(priv->catas_err.map)) {
/* If the device is off-line, we cannot try to recover it */
if (pci_channel_offline(dev->pdev))
mod_timer(&priv->catas_err.timer,
round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
else {
dump_err_buf(dev);
mlx4_dispatch_event(dev, MLX4_DEV_EVENT_CATASTROPHIC_ERROR, 0);
if (internal_err_reset) {
spin_lock(&catas_lock);
list_add(&priv->catas_err.list, &catas_list);
spin_unlock(&catas_lock);
queue_work(mlx4_wq, &catas_work);
}
}
} else
mod_timer(&priv->catas_err.timer,
round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL));
}
static void catas_reset(struct work_struct *work)
{
struct mlx4_priv *priv, *tmppriv;
struct mlx4_dev *dev;
LIST_HEAD(tlist);
int ret;
spin_lock_irq(&catas_lock);
list_splice_init(&catas_list, &tlist);
spin_unlock_irq(&catas_lock);
list_for_each_entry_safe(priv, tmppriv, &tlist, catas_err.list) {
struct pci_dev *pdev = priv->dev.pdev;
/* If the device is off-line, we cannot reset it */
if (pci_channel_offline(pdev))
continue;
ret = mlx4_restart_one(priv->dev.pdev);
/* 'priv' now is not valid */
if (ret)
pr_err("mlx4 %s: Reset failed (%d)\n",
pci_name(pdev), ret);
else {
dev = pci_get_drvdata(pdev);
mlx4_dbg(dev, "Reset succeeded\n");
}
}
}
void mlx4_start_catas_poll(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
phys_addr_t addr;
/*If we are in SRIOV the default of the module param must be 0*/
if (mlx4_is_mfunc(dev))
internal_err_reset = 0;
INIT_LIST_HEAD(&priv->catas_err.list);
init_timer(&priv->catas_err.timer);
priv->catas_err.map = NULL;
addr = pci_resource_start(dev->pdev, priv->fw.catas_bar) +
priv->fw.catas_offset;
priv->catas_err.map = ioremap(addr, priv->fw.catas_size * 4);
if (!priv->catas_err.map) {
mlx4_warn(dev, "Failed to map internal error buffer at 0x%llx\n",
(unsigned long long) addr);
return;
}
priv->catas_err.timer.data = (unsigned long) dev;
priv->catas_err.timer.function = poll_catas;
priv->catas_err.timer.expires =
round_jiffies(jiffies + MLX4_CATAS_POLL_INTERVAL);
add_timer(&priv->catas_err.timer);
}
void mlx4_stop_catas_poll(struct mlx4_dev *dev)
{
struct mlx4_priv *priv = mlx4_priv(dev);
del_timer_sync(&priv->catas_err.timer);
if (priv->catas_err.map)
iounmap(priv->catas_err.map);
spin_lock_irq(&catas_lock);
list_del(&priv->catas_err.list);
spin_unlock_irq(&catas_lock);
}
void __init mlx4_catas_init(void)
{
INIT_WORK(&catas_work, catas_reset);
}