renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-20 16:46:23 +08:00
Code
9425032b77
linux-next/arch/arm/mach-pxa/pxa3xx.c
Rafael J. Wysocki 2eaa03b5be ARM / PXA: Use struct syscore_ops for "core" power management 
Replace sysdev classes and struct sys_device objects used for "core"
power management by the PXA platform code with struct syscore_ops
objects that are simpler.

This reduces the code size and the kernel memory footprint.  It also
is necessary for removing sysdevs entirely from the kernel in the
future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-24 19:16:09 +02:00

465 lines
11 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-pxa/pxa3xx.c
*
* code specific to pxa3xx aka Monahans
*
* Copyright (C) 2006 Marvell International Ltd.
*
* 2007-09-02: eric miao <eric.miao@marvell.com>
* initial version
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <linux/syscore_ops.h>
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
#include <mach/pm.h>
#include <mach/dma.h>
#include <mach/regs-intc.h>
#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
#include "clock.h"
#define PECR_IE(n) ((1 << ((n) * 2)) << 28)
#define PECR_IS(n) ((1 << ((n) * 2)) << 29)
static DEFINE_PXA3_CKEN(pxa3xx_ffuart, FFUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_btuart, BTUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp3, SSP3, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_ssp4, SSP4, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_pwm0, PWM0, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
static DEFINE_CK(pxa3xx_camera, CAMERA, &clk_pxa3xx_hsio_ops);
static DEFINE_CK(pxa3xx_ac97, AC97, &clk_pxa3xx_ac97_ops);
static DEFINE_CLK(pxa3xx_pout, &clk_pxa3xx_pout_ops, 13000000, 70);
static struct clk_lookup pxa3xx_clkregs[] = {
INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"),
/* Power I2C clock is always on */
INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL),
INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL),
INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"),
INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"),
INIT_CLKREG(&clk_pxa3xx_ffuart, "pxa2xx-uart.0", NULL),
INIT_CLKREG(&clk_pxa3xx_btuart, "pxa2xx-uart.1", NULL),
INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-uart.2", NULL),
INIT_CLKREG(&clk_pxa3xx_stuart, "pxa2xx-ir", "UARTCLK"),
INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
INIT_CLKREG(&clk_pxa3xx_u2d, "pxa3xx-u2d", NULL),
INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp3, "pxa27x-ssp.2", NULL),
INIT_CLKREG(&clk_pxa3xx_ssp4, "pxa27x-ssp.3", NULL),
INIT_CLKREG(&clk_pxa3xx_pwm0, "pxa27x-pwm.0", NULL),
INIT_CLKREG(&clk_pxa3xx_pwm1, "pxa27x-pwm.1", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
};
#ifdef CONFIG_PM
#define ISRAM_START 0x5c000000
#define ISRAM_SIZE SZ_256K
static void __iomem *sram;
static unsigned long wakeup_src;
/*
* Enter a standby mode (S0D1C2 or S0D2C2). Upon wakeup, the dynamic
* memory controller has to be reinitialised, so we place some code
* in the SRAM to perform this function.
*
* We disable FIQs across the standby - otherwise, we might receive a
* FIQ while the SDRAM is unavailable.
*/
static void pxa3xx_cpu_standby(unsigned int pwrmode)
{
extern const char pm_enter_standby_start[], pm_enter_standby_end[];
void (*fn)(unsigned int) = (void __force *)(sram + 0x8000);
memcpy_toio(sram + 0x8000, pm_enter_standby_start,
pm_enter_standby_end - pm_enter_standby_start);
AD2D0SR = ~0;
AD2D1SR = ~0;
AD2D0ER = wakeup_src;
AD2D1ER = 0;
ASCR = ASCR;
ARSR = ARSR;
local_fiq_disable();
fn(pwrmode);
local_fiq_enable();
AD2D0ER = 0;
AD2D1ER = 0;
}
/*
* NOTE: currently, the OBM (OEM Boot Module) binary comes along with
* PXA3xx development kits assumes that the resuming process continues
* with the address stored within the first 4 bytes of SDRAM. The PSPR
* register is used privately by BootROM and OBM, and _must_ be set to
* 0x5c014000 for the moment.
*/
static void pxa3xx_cpu_pm_suspend(void)
{
volatile unsigned long *p = (volatile void *)0xc0000000;
unsigned long saved_data = *p;
extern void pxa3xx_cpu_suspend(long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
CKENB |= 1 << (CKEN_HSIO2 & 0x1f);
/* clear and setup wakeup source */
AD3SR = ~0;
AD3ER = wakeup_src;
ASCR = ASCR;
ARSR = ARSR;
PCFR |= (1u << 13); /* L1_DIS */
PCFR &= ~((1u << 12) | (1u << 1)); /* L0_EN | SL_ROD */
PSPR = 0x5c014000;
/* overwrite with the resume address */
*p = virt_to_phys(cpu_resume);
pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
*p = saved_data;
AD3ER = 0;
}
static void pxa3xx_cpu_pm_enter(suspend_state_t state)
{
/*
* Don't sleep if no wakeup sources are defined
*/
if (wakeup_src == 0) {
printk(KERN_ERR "Not suspending: no wakeup sources\n");
return;
}
switch (state) {
case PM_SUSPEND_STANDBY:
pxa3xx_cpu_standby(PXA3xx_PM_S0D2C2);
break;
case PM_SUSPEND_MEM:
pxa3xx_cpu_pm_suspend();
break;
}
}
static int pxa3xx_cpu_pm_valid(suspend_state_t state)
{
return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
}
static struct pxa_cpu_pm_fns pxa3xx_cpu_pm_fns = {
.valid = pxa3xx_cpu_pm_valid,
.enter = pxa3xx_cpu_pm_enter,
};
static void __init pxa3xx_init_pm(void)
{
sram = ioremap(ISRAM_START, ISRAM_SIZE);
if (!sram) {
printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
return;
}
/*
* Since we copy wakeup code into the SRAM, we need to ensure
* that it is preserved over the low power modes. Note: bit 8
* is undocumented in the developer manual, but must be set.
*/
AD1R |= ADXR_L2 | ADXR_R0;
AD2R |= ADXR_L2 | ADXR_R0;
AD3R |= ADXR_L2 | ADXR_R0;
/*
* Clear the resume enable registers.
*/
AD1D0ER = 0;
AD2D0ER = 0;
AD2D1ER = 0;
AD3ER = 0;
pxa_cpu_pm_fns = &pxa3xx_cpu_pm_fns;
}
static int pxa3xx_set_wake(struct irq_data *d, unsigned int on)
{
unsigned long flags, mask = 0;
switch (d->irq) {
case IRQ_SSP3:
mask = ADXER_MFP_WSSP3;
break;
case IRQ_MSL:
mask = ADXER_WMSL0;
break;
case IRQ_USBH2:
case IRQ_USBH1:
mask = ADXER_WUSBH;
break;
case IRQ_KEYPAD:
mask = ADXER_WKP;
break;
case IRQ_AC97:
mask = ADXER_MFP_WAC97;
break;
case IRQ_USIM:
mask = ADXER_WUSIM0;
break;
case IRQ_SSP2:
mask = ADXER_MFP_WSSP2;
break;
case IRQ_I2C:
mask = ADXER_MFP_WI2C;
break;
case IRQ_STUART:
mask = ADXER_MFP_WUART3;
break;
case IRQ_BTUART:
mask = ADXER_MFP_WUART2;
break;
case IRQ_FFUART:
mask = ADXER_MFP_WUART1;
break;
case IRQ_MMC:
mask = ADXER_MFP_WMMC1;
break;
case IRQ_SSP:
mask = ADXER_MFP_WSSP1;
break;
case IRQ_RTCAlrm:
mask = ADXER_WRTC;
break;
case IRQ_SSP4:
mask = ADXER_MFP_WSSP4;
break;
case IRQ_TSI:
mask = ADXER_WTSI;
break;
case IRQ_USIM2:
mask = ADXER_WUSIM1;
break;
case IRQ_MMC2:
mask = ADXER_MFP_WMMC2;
break;
case IRQ_NAND:
mask = ADXER_MFP_WFLASH;
break;
case IRQ_USB2:
mask = ADXER_WUSB2;
break;
case IRQ_WAKEUP0:
mask = ADXER_WEXTWAKE0;
break;
case IRQ_WAKEUP1:
mask = ADXER_WEXTWAKE1;
break;
case IRQ_MMC3:
mask = ADXER_MFP_GEN12;
break;
default:
return -EINVAL;
}
local_irq_save(flags);
if (on)
wakeup_src |= mask;
else
wakeup_src &= ~mask;
local_irq_restore(flags);
return 0;
}
#else
static inline void pxa3xx_init_pm(void) {}
#define pxa3xx_set_wake NULL
#endif
static void pxa_ack_ext_wakeup(struct irq_data *d)
{
PECR |= PECR_IS(d->irq - IRQ_WAKEUP0);
}
static void pxa_mask_ext_wakeup(struct irq_data *d)
{
ICMR2 &= ~(1 << ((d->irq - PXA_IRQ(0)) & 0x1f));
PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0);
}
static void pxa_unmask_ext_wakeup(struct irq_data *d)
{
ICMR2 |= 1 << ((d->irq - PXA_IRQ(0)) & 0x1f);
PECR |= PECR_IE(d->irq - IRQ_WAKEUP0);
}
static int pxa_set_ext_wakeup_type(struct irq_data *d, unsigned int flow_type)
{
if (flow_type & IRQ_TYPE_EDGE_RISING)
PWER |= 1 << (d->irq - IRQ_WAKEUP0);
if (flow_type & IRQ_TYPE_EDGE_FALLING)
PWER |= 1 << (d->irq - IRQ_WAKEUP0 + 2);
return 0;
}
static struct irq_chip pxa_ext_wakeup_chip = {
.name = "WAKEUP",
.irq_ack = pxa_ack_ext_wakeup,
.irq_mask = pxa_mask_ext_wakeup,
.irq_unmask = pxa_unmask_ext_wakeup,
.irq_set_type = pxa_set_ext_wakeup_type,
};
static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
{
int irq;
for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
irq_set_chip_and_handler(irq, &pxa_ext_wakeup_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID);
}
pxa_ext_wakeup_chip.irq_set_wake = fn;
}
void __init pxa3xx_init_irq(void)
{
/* enable CP6 access */
u32 value;
__asm__ __volatile__("mrc p15, 0, %0, c15, c1, 0\n": "=r"(value));
value |= (1 << 6);
__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
pxa_init_irq(56, pxa3xx_set_wake);
pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
static struct map_desc pxa3xx_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = SMEMC_VIRT,
.pfn = __phys_to_pfn(PXA3XX_SMEMC_BASE),
.length = 0x00200000,
.type = MT_DEVICE
}
};
void __init pxa3xx_map_io(void)
{
pxa_map_io();
iotable_init(ARRAY_AND_SIZE(pxa3xx_io_desc));
pxa3xx_get_clk_frequency_khz(1);
}
/*
* device registration specific to PXA3xx.
*/
void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
{
pxa_register_device(&pxa3xx_device_i2c_power, info);
}
static struct platform_device *devices[] __initdata = {
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
&pxa_device_asoc_ssp1,
&pxa_device_asoc_ssp2,
&pxa_device_asoc_ssp3,
&pxa_device_asoc_ssp4,
&pxa_device_asoc_platform,
&sa1100_device_rtc,
&pxa_device_rtc,
&pxa27x_device_ssp1,
&pxa27x_device_ssp2,
&pxa27x_device_ssp3,
&pxa3xx_device_ssp4,
&pxa27x_device_pwm0,
&pxa27x_device_pwm1,
};
static int __init pxa3xx_init(void)
{
int ret = 0;
if (cpu_is_pxa3xx()) {
reset_status = ARSR;
/*
* clear RDH bit every time after reset
*
* Note: the last 3 bits DxS are write-1-to-clear so carefully
* preserve them here in case they will be referenced later
*/
ASCR &= ~(ASCR_RDH | ASCR_D1S | ASCR_D2S | ASCR_D3S);
clkdev_add_table(pxa3xx_clkregs, ARRAY_SIZE(pxa3xx_clkregs));
if ((ret = pxa_init_dma(IRQ_DMA, 32)))
return ret;
pxa3xx_init_pm();
register_syscore_ops(&pxa_irq_syscore_ops);
register_syscore_ops(&pxa3xx_mfp_syscore_ops);
register_syscore_ops(&pxa_gpio_syscore_ops);
register_syscore_ops(&pxa3xx_clock_syscore_ops);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
}
return ret;
}
postcore_initcall(pxa3xx_init);
View Git Blame Copy Permalink