Grazvydas Ignotas 8c00b39f33 wl1251: register platform_device to pass board data ... wl1251 is embedded chip that can be connected using SDIO bus, and is not an actual SDIO card. For this reason there is a need to pass some board specific data, like 'EEPROM is attached' flag or power control callback. However currently there is no way to pass this data through SDIO subsystem, so this patch registers dummy platform_device to allow that, until we have a better solution to this. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Kalle Valo <kvalo@adurom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>		2010-04-16 15:32:01 -04:00
..
Kconfig	wl1271: Changed wl1271_sdio to be selectable only on ARM	2010-03-10 17:44:43 -05:00
Makefile	wl1271: Initial SDIO implementation	2010-03-09 15:02:59 -05:00
wl12xx_80211.h	wl1271: fix endianess issues	2009-10-27 16:48:19 -04:00
wl1251_acx.c	wl1251: implement wl1251_acx_tid_cfg()	2009-12-21 18:55:57 -05:00
wl1251_acx.h	wl1251: implement wl1251_acx_tid_cfg()	2009-12-21 18:55:57 -05:00
wl1251_boot.c	wl1251: reduce eeprom read wait time	2010-03-15 15:32:04 -04:00
wl1251_boot.h
wl1251_cmd.c	wl1251: use mac80211 provided channel parameters in scanning	2010-01-12 13:51:26 -05:00
wl1251_cmd.h	wl1251: use mac80211 provided channel parameters in scanning	2010-01-12 13:51:26 -05:00
wl1251_debugfs.c	wl1251: fix potential crash	2010-03-16 15:20:25 -04:00
wl1251_debugfs.h
wl1251_event.c	wl1251: Increase the beacon loss timeout value and handle regain event	2009-11-18 17:09:22 -05:00
wl1251_event.h
wl1251_init.c	wl1251: implement acx_ac_cfg to configure hardware queues	2009-12-21 18:55:55 -05:00
wl1251_init.h	wl1251: implement acx_ac_cfg to configure hardware queues	2009-12-21 18:55:55 -05:00
wl1251_io.c
wl1251_io.h	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_main.c	wl1251: read default MAC address from EEPROM when available	2010-04-16 15:32:00 -04:00
wl1251_ps.c	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1251_ps.h	wl1251: Implement delayed entry into ELP mode	2009-11-18 17:09:20 -05:00
wl1251_reg.h	wl1251: read default MAC address from EEPROM when available	2010-04-16 15:32:00 -04:00
wl1251_rx.c	wl1251: use __dev_alloc_skb() on RX	2009-12-21 18:55:54 -05:00
wl1251_rx.h
wl1251_sdio.c	wl1251: register platform_device to pass board data	2010-04-16 15:32:01 -04:00
wl1251_spi.c	wl1251: use DRIVER_NAME macro in wl1251_spi_driver	2010-04-07 14:37:54 -04:00
wl1251_spi.h
wl1251_tx.c	wl1251: update tx_hdr when aliging skb in tx	2009-12-21 18:56:00 -05:00
wl1251_tx.h	wl1251: enable WMM	2009-12-21 18:56:02 -05:00
wl1251.h	wl1251: fix ELP_CTRL register accesses when using SDIO	2010-03-15 15:32:03 -04:00
wl1271_acx.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_acx.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_boot.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_boot.h	wl1271: Configure clock-request drive mode to open-drain	2010-03-31 14:39:12 -04:00
wl1271_cmd.c	wl1271: Configure rates for templates	2010-04-06 16:55:13 -04:00
wl1271_cmd.h	wl1271: Configure rates for templates	2010-04-06 16:55:13 -04:00
wl1271_conf.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_debugfs.c	wl1271: Cleaned up wlan power on/off functions	2010-03-23 16:50:18 -04:00
wl1271_debugfs.h
wl1271_event.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_event.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_init.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_init.h	wl1271: add most of the normal initialization commands to PLT mode	2010-02-19 15:52:44 -05:00
wl1271_io.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_io.h	wl1271: Changed platform_device to be dynamically allocated	2010-03-23 16:50:25 -04:00
wl1271_main.c	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00
wl1271_ps.c	wl1271: Go to ELP in idle	2010-04-09 13:43:10 -04:00
wl1271_ps.h	wl1271: Fix PSM entry	2010-02-19 15:52:42 -05:00
wl1271_reg.h	wl1271: remove unused flags	2010-01-14 18:16:54 -05:00
wl1271_rx.c	wl1271: remove deprecated usage of RX status noise	2010-03-31 14:39:14 -04:00
wl1271_rx.h	wl1271: Clean up RX rate reporting	2010-03-31 14:39:11 -04:00
wl1271_sdio.c	wl1271: fix sdio driver name in wl1271_sdio_driver	2010-04-06 16:55:11 -04:00
wl1271_spi.c	wl1271: Update busyword checking mechanism	2010-03-31 14:39:13 -04:00
wl1271_testmode.c	wl1271: Removed wl1271_spi.h and made some functions static	2010-03-09 15:02:58 -05:00
wl1271_testmode.h	wl1271: add testmode support	2010-02-19 15:52:47 -05:00
wl1271_tx.c	wl1271: Fix tx queue flushing	2010-04-06 16:55:14 -04:00
wl1271_tx.h	wl1271: Use minimum rate for each band for control messages	2010-04-06 16:55:12 -04:00
wl1271.h	wl1271: Add support for connection quality monitoring	2010-04-09 13:43:11 -04:00