mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 13:43:55 +08:00
f7777dcc75
Panic() is going to add a \n itself and it's annoying if a panic message rolls of the screen on a device with no scrollback. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
390 lines
8.7 KiB
C
390 lines
8.7 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Parts of this file are based on Ralink's 2.6.21 BSP
|
|
*
|
|
* Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
|
|
* Copyright (C) 2013 John Crispin <blogic@openwrt.org>
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <asm/mipsregs.h>
|
|
#include <asm/mach-ralink/ralink_regs.h>
|
|
#include <asm/mach-ralink/mt7620.h>
|
|
|
|
#include "common.h"
|
|
|
|
/* does the board have sdram or ddram */
|
|
static int dram_type;
|
|
|
|
static struct ralink_pinmux_grp mode_mux[] = {
|
|
{
|
|
.name = "i2c",
|
|
.mask = MT7620_GPIO_MODE_I2C,
|
|
.gpio_first = 1,
|
|
.gpio_last = 2,
|
|
}, {
|
|
.name = "spi",
|
|
.mask = MT7620_GPIO_MODE_SPI,
|
|
.gpio_first = 3,
|
|
.gpio_last = 6,
|
|
}, {
|
|
.name = "uartlite",
|
|
.mask = MT7620_GPIO_MODE_UART1,
|
|
.gpio_first = 15,
|
|
.gpio_last = 16,
|
|
}, {
|
|
.name = "wdt",
|
|
.mask = MT7620_GPIO_MODE_WDT,
|
|
.gpio_first = 17,
|
|
.gpio_last = 17,
|
|
}, {
|
|
.name = "mdio",
|
|
.mask = MT7620_GPIO_MODE_MDIO,
|
|
.gpio_first = 22,
|
|
.gpio_last = 23,
|
|
}, {
|
|
.name = "rgmii1",
|
|
.mask = MT7620_GPIO_MODE_RGMII1,
|
|
.gpio_first = 24,
|
|
.gpio_last = 35,
|
|
}, {
|
|
.name = "spi refclk",
|
|
.mask = MT7620_GPIO_MODE_SPI_REF_CLK,
|
|
.gpio_first = 37,
|
|
.gpio_last = 39,
|
|
}, {
|
|
.name = "jtag",
|
|
.mask = MT7620_GPIO_MODE_JTAG,
|
|
.gpio_first = 40,
|
|
.gpio_last = 44,
|
|
}, {
|
|
/* shared lines with jtag */
|
|
.name = "ephy",
|
|
.mask = MT7620_GPIO_MODE_EPHY,
|
|
.gpio_first = 40,
|
|
.gpio_last = 44,
|
|
}, {
|
|
.name = "nand",
|
|
.mask = MT7620_GPIO_MODE_JTAG,
|
|
.gpio_first = 45,
|
|
.gpio_last = 59,
|
|
}, {
|
|
.name = "rgmii2",
|
|
.mask = MT7620_GPIO_MODE_RGMII2,
|
|
.gpio_first = 60,
|
|
.gpio_last = 71,
|
|
}, {
|
|
.name = "wled",
|
|
.mask = MT7620_GPIO_MODE_WLED,
|
|
.gpio_first = 72,
|
|
.gpio_last = 72,
|
|
}, {0}
|
|
};
|
|
|
|
static struct ralink_pinmux_grp uart_mux[] = {
|
|
{
|
|
.name = "uartf",
|
|
.mask = MT7620_GPIO_MODE_UARTF,
|
|
.gpio_first = 7,
|
|
.gpio_last = 14,
|
|
}, {
|
|
.name = "pcm uartf",
|
|
.mask = MT7620_GPIO_MODE_PCM_UARTF,
|
|
.gpio_first = 7,
|
|
.gpio_last = 14,
|
|
}, {
|
|
.name = "pcm i2s",
|
|
.mask = MT7620_GPIO_MODE_PCM_I2S,
|
|
.gpio_first = 7,
|
|
.gpio_last = 14,
|
|
}, {
|
|
.name = "i2s uartf",
|
|
.mask = MT7620_GPIO_MODE_I2S_UARTF,
|
|
.gpio_first = 7,
|
|
.gpio_last = 14,
|
|
}, {
|
|
.name = "pcm gpio",
|
|
.mask = MT7620_GPIO_MODE_PCM_GPIO,
|
|
.gpio_first = 11,
|
|
.gpio_last = 14,
|
|
}, {
|
|
.name = "gpio uartf",
|
|
.mask = MT7620_GPIO_MODE_GPIO_UARTF,
|
|
.gpio_first = 7,
|
|
.gpio_last = 10,
|
|
}, {
|
|
.name = "gpio i2s",
|
|
.mask = MT7620_GPIO_MODE_GPIO_I2S,
|
|
.gpio_first = 7,
|
|
.gpio_last = 10,
|
|
}, {
|
|
.name = "gpio",
|
|
.mask = MT7620_GPIO_MODE_GPIO,
|
|
}, {0}
|
|
};
|
|
|
|
struct ralink_pinmux rt_gpio_pinmux = {
|
|
.mode = mode_mux,
|
|
.uart = uart_mux,
|
|
.uart_shift = MT7620_GPIO_MODE_UART0_SHIFT,
|
|
.uart_mask = MT7620_GPIO_MODE_UART0_MASK,
|
|
};
|
|
|
|
static __init u32
|
|
mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div)
|
|
{
|
|
u64 t;
|
|
|
|
t = ref_rate;
|
|
t *= mul;
|
|
do_div(t, div);
|
|
|
|
return t;
|
|
}
|
|
|
|
#define MHZ(x) ((x) * 1000 * 1000)
|
|
|
|
static __init unsigned long
|
|
mt7620_get_xtal_rate(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
|
|
if (reg & SYSCFG0_XTAL_FREQ_SEL)
|
|
return MHZ(40);
|
|
|
|
return MHZ(20);
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_periph_rate(unsigned long xtal_rate)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CLKCFG0);
|
|
if (reg & CLKCFG0_PERI_CLK_SEL)
|
|
return xtal_rate;
|
|
|
|
return MHZ(40);
|
|
}
|
|
|
|
static const u32 mt7620_clk_divider[] __initconst = { 2, 3, 4, 8 };
|
|
|
|
static __init unsigned long
|
|
mt7620_get_cpu_pll_rate(unsigned long xtal_rate)
|
|
{
|
|
u32 reg;
|
|
u32 mul;
|
|
u32 div;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG0);
|
|
if (reg & CPLL_CFG0_BYPASS_REF_CLK)
|
|
return xtal_rate;
|
|
|
|
if ((reg & CPLL_CFG0_SW_CFG) == 0)
|
|
return MHZ(600);
|
|
|
|
mul = (reg >> CPLL_CFG0_PLL_MULT_RATIO_SHIFT) &
|
|
CPLL_CFG0_PLL_MULT_RATIO_MASK;
|
|
mul += 24;
|
|
if (reg & CPLL_CFG0_LC_CURFCK)
|
|
mul *= 2;
|
|
|
|
div = (reg >> CPLL_CFG0_PLL_DIV_RATIO_SHIFT) &
|
|
CPLL_CFG0_PLL_DIV_RATIO_MASK;
|
|
|
|
WARN_ON(div >= ARRAY_SIZE(mt7620_clk_divider));
|
|
|
|
return mt7620_calc_rate(xtal_rate, mul, mt7620_clk_divider[div]);
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_pll_rate(unsigned long xtal_rate, unsigned long cpu_pll_rate)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPLL_CONFIG1);
|
|
if (reg & CPLL_CFG1_CPU_AUX1)
|
|
return xtal_rate;
|
|
|
|
if (reg & CPLL_CFG1_CPU_AUX0)
|
|
return MHZ(480);
|
|
|
|
return cpu_pll_rate;
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_cpu_rate(unsigned long pll_rate)
|
|
{
|
|
u32 reg;
|
|
u32 mul;
|
|
u32 div;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
|
|
|
|
mul = reg & CPU_SYS_CLKCFG_CPU_FFRAC_MASK;
|
|
div = (reg >> CPU_SYS_CLKCFG_CPU_FDIV_SHIFT) &
|
|
CPU_SYS_CLKCFG_CPU_FDIV_MASK;
|
|
|
|
return mt7620_calc_rate(pll_rate, mul, div);
|
|
}
|
|
|
|
static const u32 mt7620_ocp_dividers[16] __initconst = {
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_2] = 2,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_3] = 3,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_4] = 4,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_5] = 5,
|
|
[CPU_SYS_CLKCFG_OCP_RATIO_10] = 10,
|
|
};
|
|
|
|
static __init unsigned long
|
|
mt7620_get_dram_rate(unsigned long pll_rate)
|
|
{
|
|
if (dram_type == SYSCFG0_DRAM_TYPE_SDRAM)
|
|
return pll_rate / 4;
|
|
|
|
return pll_rate / 3;
|
|
}
|
|
|
|
static __init unsigned long
|
|
mt7620_get_sys_rate(unsigned long cpu_rate)
|
|
{
|
|
u32 reg;
|
|
u32 ocp_ratio;
|
|
u32 div;
|
|
|
|
reg = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG);
|
|
|
|
ocp_ratio = (reg >> CPU_SYS_CLKCFG_OCP_RATIO_SHIFT) &
|
|
CPU_SYS_CLKCFG_OCP_RATIO_MASK;
|
|
|
|
if (WARN_ON(ocp_ratio >= ARRAY_SIZE(mt7620_ocp_dividers)))
|
|
return cpu_rate;
|
|
|
|
div = mt7620_ocp_dividers[ocp_ratio];
|
|
if (WARN(!div, "invalid divider for OCP ratio %u", ocp_ratio))
|
|
return cpu_rate;
|
|
|
|
return cpu_rate / div;
|
|
}
|
|
|
|
void __init ralink_clk_init(void)
|
|
{
|
|
unsigned long xtal_rate;
|
|
unsigned long cpu_pll_rate;
|
|
unsigned long pll_rate;
|
|
unsigned long cpu_rate;
|
|
unsigned long sys_rate;
|
|
unsigned long dram_rate;
|
|
unsigned long periph_rate;
|
|
|
|
xtal_rate = mt7620_get_xtal_rate();
|
|
|
|
cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate);
|
|
pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate);
|
|
|
|
cpu_rate = mt7620_get_cpu_rate(pll_rate);
|
|
dram_rate = mt7620_get_dram_rate(pll_rate);
|
|
sys_rate = mt7620_get_sys_rate(cpu_rate);
|
|
periph_rate = mt7620_get_periph_rate(xtal_rate);
|
|
|
|
#define RFMT(label) label ":%lu.%03luMHz "
|
|
#define RINT(x) ((x) / 1000000)
|
|
#define RFRAC(x) (((x) / 1000) % 1000)
|
|
|
|
pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"),
|
|
RINT(xtal_rate), RFRAC(xtal_rate),
|
|
RINT(cpu_pll_rate), RFRAC(cpu_pll_rate),
|
|
RINT(pll_rate), RFRAC(pll_rate));
|
|
|
|
pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"),
|
|
RINT(cpu_rate), RFRAC(cpu_rate),
|
|
RINT(dram_rate), RFRAC(dram_rate),
|
|
RINT(sys_rate), RFRAC(sys_rate),
|
|
RINT(periph_rate), RFRAC(periph_rate));
|
|
|
|
#undef RFRAC
|
|
#undef RINT
|
|
#undef RFMT
|
|
|
|
ralink_clk_add("cpu", cpu_rate);
|
|
ralink_clk_add("10000100.timer", periph_rate);
|
|
ralink_clk_add("10000120.watchdog", periph_rate);
|
|
ralink_clk_add("10000500.uart", periph_rate);
|
|
ralink_clk_add("10000b00.spi", sys_rate);
|
|
ralink_clk_add("10000c00.uartlite", periph_rate);
|
|
}
|
|
|
|
void __init ralink_of_remap(void)
|
|
{
|
|
rt_sysc_membase = plat_of_remap_node("ralink,mt7620a-sysc");
|
|
rt_memc_membase = plat_of_remap_node("ralink,mt7620a-memc");
|
|
|
|
if (!rt_sysc_membase || !rt_memc_membase)
|
|
panic("Failed to remap core resources");
|
|
}
|
|
|
|
void prom_soc_init(struct ralink_soc_info *soc_info)
|
|
{
|
|
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
|
|
unsigned char *name = NULL;
|
|
u32 n0;
|
|
u32 n1;
|
|
u32 rev;
|
|
u32 cfg0;
|
|
|
|
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
|
|
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
|
|
|
|
if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) {
|
|
name = "MT7620N";
|
|
soc_info->compatible = "ralink,mt7620n-soc";
|
|
} else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) {
|
|
name = "MT7620A";
|
|
soc_info->compatible = "ralink,mt7620a-soc";
|
|
} else {
|
|
panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1);
|
|
}
|
|
|
|
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
|
|
|
|
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
|
|
"Ralink %s ver:%u eco:%u",
|
|
name,
|
|
(rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK,
|
|
(rev & CHIP_REV_ECO_MASK));
|
|
|
|
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
|
|
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
|
|
|
|
switch (dram_type) {
|
|
case SYSCFG0_DRAM_TYPE_SDRAM:
|
|
pr_info("Board has SDRAM\n");
|
|
soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX;
|
|
break;
|
|
|
|
case SYSCFG0_DRAM_TYPE_DDR1:
|
|
pr_info("Board has DDR1\n");
|
|
soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX;
|
|
break;
|
|
|
|
case SYSCFG0_DRAM_TYPE_DDR2:
|
|
pr_info("Board has DDR2\n");
|
|
soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN;
|
|
soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
soc_info->mem_base = MT7620_DRAM_BASE;
|
|
}
|