mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
af0ba001d2
In some platforms (like am33xx), PWM sub modules (ECAP, EHRPWM, EQEP) are integrated to PWM subsystem. These PWM submodules has resources shared and only one register bit-field is provided to control module/clock enable/disable, makes it difficult to handle common resources from independent PWMSS submodule drivers. So the solution here implemented in this patch is, to create driver for PWMSS and take the role of parent driver for PWM submodules. PWMSS parent driver enumerates all the child nodes under PWMSS module. Also symbol "pwmss_submodule_state_change" exported to enable clock gating for individual PWMSS submodules, and submodule drivers has to enable clock gating from their drivers. As this is only supported during DT boot, the parent/child relationship is created and populated in DT execution flow. The only required change is inside DTS file, making EHRPWM & ECAP as a child to PWMSS node. Signed-off-by: Philip, Avinash <avinashphilip@ti.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de>
32 lines
1.1 KiB
Plaintext
32 lines
1.1 KiB
Plaintext
TI SOC based PWM Subsystem
|
|
|
|
Required properties:
|
|
- compatible: Must be "ti,am33xx-pwmss";
|
|
- reg: physical base address and size of the registers map.
|
|
- address-cells: Specify the number of u32 entries needed in child nodes.
|
|
Should set to 1.
|
|
- size-cells: specify number of u32 entries needed to specify child nodes size
|
|
in reg property. Should set to 1.
|
|
- ranges: describes the address mapping of a memory-mapped bus. Should set to
|
|
physical address map of child's base address, physical address within
|
|
parent's address space and length of the address map. For am33xx,
|
|
3 set of child register maps present, ECAP register space, EQEP
|
|
register space, EHRPWM register space.
|
|
|
|
Also child nodes should also populated under PWMSS DT node.
|
|
|
|
Example:
|
|
pwmss0: pwmss@48300000 {
|
|
compatible = "ti,am33xx-pwmss";
|
|
reg = <0x48300000 0x10>;
|
|
ti,hwmods = "epwmss0";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
ranges = <0x48300100 0x48300100 0x80 /* ECAP */
|
|
0x48300180 0x48300180 0x80 /* EQEP */
|
|
0x48300200 0x48300200 0x80>; /* EHRPWM */
|
|
|
|
/* child nodes go here */
|
|
};
|