mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 05:04:00 +08:00
ce43625466
The per-SoC data structures for Tegra pinctrl stored some information in a redundant way. Specifically, the list of groups that each function could be muxed onto was stored once explicitly, and also as part of the definition of each group. Eliminate this redundancy, and calculate each function's list of valid groups at pinctrl probe time. This removes thousands of lines of code from the pinctrl driver and ~16K from the vmlinux binary size, and adds only about 500uS to the boot process (on Tegra30; newer SoCs will likely be faster still). Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
207 lines
7.1 KiB
C
207 lines
7.1 KiB
C
/*
|
|
* Driver for the NVIDIA Tegra pinmux
|
|
*
|
|
* Copyright (c) 2011, NVIDIA CORPORATION. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*/
|
|
|
|
#ifndef __PINMUX_TEGRA_H__
|
|
#define __PINMUX_TEGRA_H__
|
|
|
|
enum tegra_pinconf_param {
|
|
/* argument: tegra_pinconf_pull */
|
|
TEGRA_PINCONF_PARAM_PULL,
|
|
/* argument: tegra_pinconf_tristate */
|
|
TEGRA_PINCONF_PARAM_TRISTATE,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_ENABLE_INPUT,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_OPEN_DRAIN,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_LOCK,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_IORESET,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_RCV_SEL,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_SCHMITT,
|
|
/* argument: Boolean */
|
|
TEGRA_PINCONF_PARAM_LOW_POWER_MODE,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_DRIVE_DOWN_STRENGTH,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_SLEW_RATE_RISING,
|
|
/* argument: Integer, range is HW-dependant */
|
|
TEGRA_PINCONF_PARAM_DRIVE_TYPE,
|
|
};
|
|
|
|
enum tegra_pinconf_pull {
|
|
TEGRA_PINCONFIG_PULL_NONE,
|
|
TEGRA_PINCONFIG_PULL_DOWN,
|
|
TEGRA_PINCONFIG_PULL_UP,
|
|
};
|
|
|
|
enum tegra_pinconf_tristate {
|
|
TEGRA_PINCONFIG_DRIVEN,
|
|
TEGRA_PINCONFIG_TRISTATE,
|
|
};
|
|
|
|
#define TEGRA_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))
|
|
#define TEGRA_PINCONF_UNPACK_PARAM(_conf_) ((_conf_) >> 16)
|
|
#define TEGRA_PINCONF_UNPACK_ARG(_conf_) ((_conf_) & 0xffff)
|
|
|
|
/**
|
|
* struct tegra_function - Tegra pinctrl mux function
|
|
* @name: The name of the function, exported to pinctrl core.
|
|
* @groups: An array of pin groups that may select this function.
|
|
* @ngroups: The number of entries in @groups.
|
|
*/
|
|
struct tegra_function {
|
|
const char *name;
|
|
const char **groups;
|
|
unsigned ngroups;
|
|
};
|
|
|
|
/**
|
|
* struct tegra_pingroup - Tegra pin group
|
|
* @mux_reg: Mux register offset. -1 if unsupported.
|
|
* @mux_bank: Mux register bank. 0 if unsupported.
|
|
* @mux_bit: Mux register bit. 0 if unsupported.
|
|
* @pupd_reg: Pull-up/down register offset. -1 if unsupported.
|
|
* @pupd_bank: Pull-up/down register bank. 0 if unsupported.
|
|
* @pupd_bit: Pull-up/down register bit. 0 if unsupported.
|
|
* @tri_reg: Tri-state register offset. -1 if unsupported.
|
|
* @tri_bank: Tri-state register bank. 0 if unsupported.
|
|
* @tri_bit: Tri-state register bit. 0 if unsupported.
|
|
* @einput_reg: Enable-input register offset. -1 if unsupported.
|
|
* @einput_bank: Enable-input register bank. 0 if unsupported.
|
|
* @einput_bit: Enable-input register bit. 0 if unsupported.
|
|
* @odrain_reg: Open-drain register offset. -1 if unsupported.
|
|
* @odrain_bank: Open-drain register bank. 0 if unsupported.
|
|
* @odrain_bit: Open-drain register bit. 0 if unsupported.
|
|
* @lock_reg: Lock register offset. -1 if unsupported.
|
|
* @lock_bank: Lock register bank. 0 if unsupported.
|
|
* @lock_bit: Lock register bit. 0 if unsupported.
|
|
* @ioreset_reg: IO reset register offset. -1 if unsupported.
|
|
* @ioreset_bank: IO reset register bank. 0 if unsupported.
|
|
* @ioreset_bit: IO reset register bit. 0 if unsupported.
|
|
* @rcv_sel_reg: Receiver select offset. -1 if unsupported.
|
|
* @rcv_sel_bank: Receiver select bank. 0 if unsupported.
|
|
* @rcv_sel_bit: Receiver select bit. 0 if unsupported.
|
|
* @drv_reg: Drive fields register offset. -1 if unsupported.
|
|
* This register contains the hsm, schmitt, lpmd, drvdn,
|
|
* drvup, slwr, and slwf parameters.
|
|
* @drv_bank: Drive fields register bank. 0 if unsupported.
|
|
* @hsm_bit: High Speed Mode register bit. 0 if unsupported.
|
|
* @schmitt_bit: Scmitt register bit. 0 if unsupported.
|
|
* @lpmd_bit: Low Power Mode register bit. 0 if unsupported.
|
|
* @drvdn_bit: Drive Down register bit. 0 if unsupported.
|
|
* @drvdn_width: Drive Down field width. 0 if unsupported.
|
|
* @drvup_bit: Drive Up register bit. 0 if unsupported.
|
|
* @drvup_width: Drive Up field width. 0 if unsupported.
|
|
* @slwr_bit: Slew Rising register bit. 0 if unsupported.
|
|
* @slwr_width: Slew Rising field width. 0 if unsupported.
|
|
* @slwf_bit: Slew Falling register bit. 0 if unsupported.
|
|
* @slwf_width: Slew Falling field width. 0 if unsupported.
|
|
* @drvtype_reg: Drive type fields register offset. -1 if unsupported.
|
|
* @drvtype_bank: Drive type fields register bank. 0 if unsupported.
|
|
* @drvtype_bit: Drive type register bit. 0 if unsupported.
|
|
*
|
|
* A representation of a group of pins (possibly just one pin) in the Tegra
|
|
* pin controller. Each group allows some parameter or parameters to be
|
|
* configured. The most common is mux function selection. Many others exist
|
|
* such as pull-up/down, tri-state, etc. Tegra's pin controller is complex;
|
|
* certain groups may only support configuring certain parameters, hence
|
|
* each parameter is optional, represented by a -1 "reg" value.
|
|
*/
|
|
struct tegra_pingroup {
|
|
const char *name;
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
unsigned funcs[4];
|
|
unsigned func_safe;
|
|
s16 mux_reg;
|
|
s16 pupd_reg;
|
|
s16 tri_reg;
|
|
s16 einput_reg;
|
|
s16 odrain_reg;
|
|
s16 lock_reg;
|
|
s16 ioreset_reg;
|
|
s16 rcv_sel_reg;
|
|
s16 drv_reg;
|
|
s16 drvtype_reg;
|
|
u32 mux_bank:2;
|
|
u32 pupd_bank:2;
|
|
u32 tri_bank:2;
|
|
u32 einput_bank:2;
|
|
u32 odrain_bank:2;
|
|
u32 ioreset_bank:2;
|
|
u32 rcv_sel_bank:2;
|
|
u32 lock_bank:2;
|
|
u32 drv_bank:2;
|
|
u32 drvtype_bank:2;
|
|
u32 mux_bit:5;
|
|
u32 pupd_bit:5;
|
|
u32 tri_bit:5;
|
|
u32 einput_bit:5;
|
|
u32 odrain_bit:5;
|
|
u32 lock_bit:5;
|
|
u32 ioreset_bit:5;
|
|
u32 rcv_sel_bit:5;
|
|
u32 hsm_bit:5;
|
|
u32 schmitt_bit:5;
|
|
u32 lpmd_bit:5;
|
|
u32 drvdn_bit:5;
|
|
u32 drvup_bit:5;
|
|
u32 slwr_bit:5;
|
|
u32 slwf_bit:5;
|
|
u32 drvtype_bit:5;
|
|
u32 drvdn_width:6;
|
|
u32 drvup_width:6;
|
|
u32 slwr_width:6;
|
|
u32 slwf_width:6;
|
|
};
|
|
|
|
/**
|
|
* struct tegra_pinctrl_soc_data - Tegra pin controller driver configuration
|
|
* @ngpios: The number of GPIO pins the pin controller HW affects.
|
|
* @pins: An array describing all pins the pin controller affects.
|
|
* All pins which are also GPIOs must be listed first within the
|
|
* array, and be numbered identically to the GPIO controller's
|
|
* numbering.
|
|
* @npins: The numbmer of entries in @pins.
|
|
* @functions: An array describing all mux functions the SoC supports.
|
|
* @nfunctions: The numbmer of entries in @functions.
|
|
* @groups: An array describing all pin groups the pin SoC supports.
|
|
* @ngroups: The numbmer of entries in @groups.
|
|
*/
|
|
struct tegra_pinctrl_soc_data {
|
|
unsigned ngpios;
|
|
const struct pinctrl_pin_desc *pins;
|
|
unsigned npins;
|
|
struct tegra_function *functions;
|
|
unsigned nfunctions;
|
|
const struct tegra_pingroup *groups;
|
|
unsigned ngroups;
|
|
};
|
|
|
|
int tegra_pinctrl_probe(struct platform_device *pdev,
|
|
const struct tegra_pinctrl_soc_data *soc_data);
|
|
int tegra_pinctrl_remove(struct platform_device *pdev);
|
|
|
|
#endif
|