mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
906c4d5c93
During reset the VMMC regulator doesn't reach 0V and only drops to 1.8V, furthermore the pulse width is under 200us whereas the SD specification expect 1ms. For this 2 reasons being able to no reset at all the VMMC during warm reset and keep the current voltage is a good workaround. The TWL6030 allows this but needs to be aware of it and this configuration should also be shared with the bootloader. This is the purpose of this new property: ti,retain-on-reset Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20190725094542.16547-2-gregory.clement@bootlin.com Signed-off-by: Mark Brown <broonie@kernel.org>
81 lines
2.7 KiB
Plaintext
81 lines
2.7 KiB
Plaintext
TWL family of regulators
|
|
|
|
Required properties:
|
|
For twl6030 regulators/LDOs
|
|
- compatible:
|
|
- "ti,twl6030-vaux1" for VAUX1 LDO
|
|
- "ti,twl6030-vaux2" for VAUX2 LDO
|
|
- "ti,twl6030-vaux3" for VAUX3 LDO
|
|
- "ti,twl6030-vmmc" for VMMC LDO
|
|
- "ti,twl6030-vpp" for VPP LDO
|
|
- "ti,twl6030-vusim" for VUSIM LDO
|
|
- "ti,twl6030-vana" for VANA LDO
|
|
- "ti,twl6030-vcxio" for VCXIO LDO
|
|
- "ti,twl6030-vdac" for VDAC LDO
|
|
- "ti,twl6030-vusb" for VUSB LDO
|
|
- "ti,twl6030-v1v8" for V1V8 LDO
|
|
- "ti,twl6030-v2v1" for V2V1 LDO
|
|
- "ti,twl6030-vdd1" for VDD1 SMPS
|
|
- "ti,twl6030-vdd2" for VDD2 SMPS
|
|
- "ti,twl6030-vdd3" for VDD3 SMPS
|
|
For twl6032 regulators/LDOs
|
|
- compatible:
|
|
- "ti,twl6032-ldo1" for LDO1 LDO
|
|
- "ti,twl6032-ldo2" for LDO2 LDO
|
|
- "ti,twl6032-ldo3" for LDO3 LDO
|
|
- "ti,twl6032-ldo4" for LDO4 LDO
|
|
- "ti,twl6032-ldo5" for LDO5 LDO
|
|
- "ti,twl6032-ldo6" for LDO6 LDO
|
|
- "ti,twl6032-ldo7" for LDO7 LDO
|
|
- "ti,twl6032-ldoln" for LDOLN LDO
|
|
- "ti,twl6032-ldousb" for LDOUSB LDO
|
|
- "ti,twl6032-smps3" for SMPS3 SMPS
|
|
- "ti,twl6032-smps4" for SMPS4 SMPS
|
|
- "ti,twl6032-vio" for VIO SMPS
|
|
For twl4030 regulators/LDOs
|
|
- compatible:
|
|
- "ti,twl4030-vaux1" for VAUX1 LDO
|
|
- "ti,twl4030-vaux2" for VAUX2 LDO
|
|
- "ti,twl5030-vaux2" for VAUX2 LDO
|
|
- "ti,twl4030-vaux3" for VAUX3 LDO
|
|
- "ti,twl4030-vaux4" for VAUX4 LDO
|
|
- "ti,twl4030-vmmc1" for VMMC1 LDO
|
|
- "ti,twl4030-vmmc2" for VMMC2 LDO
|
|
- "ti,twl4030-vpll1" for VPLL1 LDO
|
|
- "ti,twl4030-vpll2" for VPLL2 LDO
|
|
- "ti,twl4030-vsim" for VSIM LDO
|
|
- "ti,twl4030-vdac" for VDAC LDO
|
|
- "ti,twl4030-vintana2" for VINTANA2 LDO
|
|
- "ti,twl4030-vio" for VIO LDO
|
|
- "ti,twl4030-vdd1" for VDD1 SMPS
|
|
- "ti,twl4030-vdd2" for VDD2 SMPS
|
|
- "ti,twl4030-vintana1" for VINTANA1 LDO
|
|
- "ti,twl4030-vintdig" for VINTDIG LDO
|
|
- "ti,twl4030-vusb1v5" for VUSB1V5 LDO
|
|
- "ti,twl4030-vusb1v8" for VUSB1V8 LDO
|
|
- "ti,twl4030-vusb3v1" for VUSB3V1 LDO
|
|
|
|
Optional properties:
|
|
- Any optional property defined in bindings/regulator/regulator.txt
|
|
For twl4030 regulators/LDOs:
|
|
- regulator-initial-mode:
|
|
- 0x08 - Sleep mode, the nominal output voltage is maintained with low power
|
|
consumption with low load current capability.
|
|
- 0x0e - Active mode, the regulator can deliver its nominal output voltage
|
|
with full-load current capability.
|
|
|
|
Example:
|
|
|
|
xyz: regulator@0 {
|
|
compatible = "ti,twl6030-vaux1";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
For twl6030 regulators/LDOs:
|
|
|
|
- ti,retain-on-reset: Does not turn off the supplies during warm
|
|
reset. Could be needed for VMMC, as TWL6030
|
|
reset sequence for this signal does not comply
|
|
with the SD specification.
|