2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/arch/x86/hyperv/hv_apic.c
Michael Kelley dbf563eee0 x86/hyperv: Clarify comment on x2apic mode
The comment about Hyper-V accessors is unclear regarding their
potential use in x2apic mode, as is the associated commit message
in e211288b72.  Clarify that while the architectural and
synthetic MSRs are equivalent in x2apic mode, the full set of xapic
accessors cannot be used because of register layout differences.

Fixes: e211288b72 ("x86/hyperv: Make vapic support x2apic mode")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1603723972-81303-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-10-26 16:28:06 +00:00

295 lines
7.2 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Hyper-V specific APIC code.
*
* Copyright (C) 2018, Microsoft, Inc.
*
* Author : K. Y. Srinivasan <kys@microsoft.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
*/
#include <linux/types.h>
#include <linux/vmalloc.h>
#include <linux/mm.h>
#include <linux/clockchips.h>
#include <linux/hyperv.h>
#include <linux/slab.h>
#include <linux/cpuhotplug.h>
#include <asm/hypervisor.h>
#include <asm/mshyperv.h>
#include <asm/apic.h>
#include <asm/trace/hyperv.h>
static struct apic orig_apic;
static u64 hv_apic_icr_read(void)
{
u64 reg_val;
rdmsrl(HV_X64_MSR_ICR, reg_val);
return reg_val;
}
static void hv_apic_icr_write(u32 low, u32 id)
{
u64 reg_val;
reg_val = SET_APIC_DEST_FIELD(id);
reg_val = reg_val << 32;
reg_val |= low;
wrmsrl(HV_X64_MSR_ICR, reg_val);
}
static u32 hv_apic_read(u32 reg)
{
u32 reg_val, hi;
switch (reg) {
case APIC_EOI:
rdmsr(HV_X64_MSR_EOI, reg_val, hi);
return reg_val;
case APIC_TASKPRI:
rdmsr(HV_X64_MSR_TPR, reg_val, hi);
return reg_val;
default:
return native_apic_mem_read(reg);
}
}
static void hv_apic_write(u32 reg, u32 val)
{
switch (reg) {
case APIC_EOI:
wrmsr(HV_X64_MSR_EOI, val, 0);
break;
case APIC_TASKPRI:
wrmsr(HV_X64_MSR_TPR, val, 0);
break;
default:
native_apic_mem_write(reg, val);
}
}
static void hv_apic_eoi_write(u32 reg, u32 val)
{
struct hv_vp_assist_page *hvp = hv_vp_assist_page[smp_processor_id()];
if (hvp && (xchg(&hvp->apic_assist, 0) & 0x1))
return;
wrmsr(HV_X64_MSR_EOI, val, 0);
}
/*
* IPI implementation on Hyper-V.
*/
static bool __send_ipi_mask_ex(const struct cpumask *mask, int vector)
{
struct hv_send_ipi_ex **arg;
struct hv_send_ipi_ex *ipi_arg;
unsigned long flags;
int nr_bank = 0;
int ret = 1;
if (!(ms_hyperv.hints & HV_X64_EX_PROCESSOR_MASKS_RECOMMENDED))
return false;
local_irq_save(flags);
arg = (struct hv_send_ipi_ex **)this_cpu_ptr(hyperv_pcpu_input_arg);
ipi_arg = *arg;
if (unlikely(!ipi_arg))
goto ipi_mask_ex_done;
ipi_arg->vector = vector;
ipi_arg->reserved = 0;
ipi_arg->vp_set.valid_bank_mask = 0;
if (!cpumask_equal(mask, cpu_present_mask)) {
ipi_arg->vp_set.format = HV_GENERIC_SET_SPARSE_4K;
nr_bank = cpumask_to_vpset(&(ipi_arg->vp_set), mask);
}
if (nr_bank < 0)
goto ipi_mask_ex_done;
if (!nr_bank)
ipi_arg->vp_set.format = HV_GENERIC_SET_ALL;
ret = hv_do_rep_hypercall(HVCALL_SEND_IPI_EX, 0, nr_bank,
ipi_arg, NULL);
ipi_mask_ex_done:
local_irq_restore(flags);
return ((ret == 0) ? true : false);
}
static bool __send_ipi_mask(const struct cpumask *mask, int vector)
{
int cur_cpu, vcpu;
struct hv_send_ipi ipi_arg;
int ret = 1;
trace_hyperv_send_ipi_mask(mask, vector);
if (cpumask_empty(mask))
return true;
if (!hv_hypercall_pg)
return false;
if ((vector < HV_IPI_LOW_VECTOR) || (vector > HV_IPI_HIGH_VECTOR))
return false;
/*
* From the supplied CPU set we need to figure out if we can get away
* with cheaper HVCALL_SEND_IPI hypercall. This is possible when the
* highest VP number in the set is < 64. As VP numbers are usually in
* ascending order and match Linux CPU ids, here is an optimization:
* we check the VP number for the highest bit in the supplied set first
* so we can quickly find out if using HVCALL_SEND_IPI_EX hypercall is
* a must. We will also check all VP numbers when walking the supplied
* CPU set to remain correct in all cases.
*/
if (hv_cpu_number_to_vp_number(cpumask_last(mask)) >= 64)
goto do_ex_hypercall;
ipi_arg.vector = vector;
ipi_arg.cpu_mask = 0;
for_each_cpu(cur_cpu, mask) {
vcpu = hv_cpu_number_to_vp_number(cur_cpu);
if (vcpu == VP_INVAL)
return false;
/*
* This particular version of the IPI hypercall can
* only target upto 64 CPUs.
*/
if (vcpu >= 64)
goto do_ex_hypercall;
__set_bit(vcpu, (unsigned long *)&ipi_arg.cpu_mask);
}
ret = hv_do_fast_hypercall16(HVCALL_SEND_IPI, ipi_arg.vector,
ipi_arg.cpu_mask);
return ((ret == 0) ? true : false);
do_ex_hypercall:
return __send_ipi_mask_ex(mask, vector);
}
static bool __send_ipi_one(int cpu, int vector)
{
int vp = hv_cpu_number_to_vp_number(cpu);
trace_hyperv_send_ipi_one(cpu, vector);
if (!hv_hypercall_pg || (vp == VP_INVAL))
return false;
if ((vector < HV_IPI_LOW_VECTOR) || (vector > HV_IPI_HIGH_VECTOR))
return false;
if (vp >= 64)
return __send_ipi_mask_ex(cpumask_of(cpu), vector);
return !hv_do_fast_hypercall16(HVCALL_SEND_IPI, vector, BIT_ULL(vp));
}
static void hv_send_ipi(int cpu, int vector)
{
if (!__send_ipi_one(cpu, vector))
orig_apic.send_IPI(cpu, vector);
}
static void hv_send_ipi_mask(const struct cpumask *mask, int vector)
{
if (!__send_ipi_mask(mask, vector))
orig_apic.send_IPI_mask(mask, vector);
}
static void hv_send_ipi_mask_allbutself(const struct cpumask *mask, int vector)
{
unsigned int this_cpu = smp_processor_id();
struct cpumask new_mask;
const struct cpumask *local_mask;
cpumask_copy(&new_mask, mask);
cpumask_clear_cpu(this_cpu, &new_mask);
local_mask = &new_mask;
if (!__send_ipi_mask(local_mask, vector))
orig_apic.send_IPI_mask_allbutself(mask, vector);
}
static void hv_send_ipi_allbutself(int vector)
{
hv_send_ipi_mask_allbutself(cpu_online_mask, vector);
}
static void hv_send_ipi_all(int vector)
{
if (!__send_ipi_mask(cpu_online_mask, vector))
orig_apic.send_IPI_all(vector);
}
static void hv_send_ipi_self(int vector)
{
if (!__send_ipi_one(smp_processor_id(), vector))
orig_apic.send_IPI_self(vector);
}
void __init hv_apic_init(void)
{
if (ms_hyperv.hints & HV_X64_CLUSTER_IPI_RECOMMENDED) {
pr_info("Hyper-V: Using IPI hypercalls\n");
/*
* Set the IPI entry points.
*/
orig_apic = *apic;
apic->send_IPI = hv_send_ipi;
apic->send_IPI_mask = hv_send_ipi_mask;
apic->send_IPI_mask_allbutself = hv_send_ipi_mask_allbutself;
apic->send_IPI_allbutself = hv_send_ipi_allbutself;
apic->send_IPI_all = hv_send_ipi_all;
apic->send_IPI_self = hv_send_ipi_self;
}
if (ms_hyperv.hints & HV_X64_APIC_ACCESS_RECOMMENDED) {
pr_info("Hyper-V: Using enlightened APIC (%s mode)",
x2apic_enabled() ? "x2apic" : "xapic");
/*
* When in x2apic mode, don't use the Hyper-V specific APIC
* accessors since the field layout in the ICR register is
* different in x2apic mode. Furthermore, the architectural
* x2apic MSRs function just as well as the Hyper-V
* synthetic APIC MSRs, so there's no benefit in having
* separate Hyper-V accessors for x2apic mode. The only
* exception is hv_apic_eoi_write, because it benefits from
* lazy EOI when available, but the same accessor works for
* both xapic and x2apic because the field layout is the same.
*/
apic_set_eoi_write(hv_apic_eoi_write);
if (!x2apic_enabled()) {
apic->read = hv_apic_read;
apic->write = hv_apic_write;
apic->icr_write = hv_apic_icr_write;
apic->icr_read = hv_apic_icr_read;
}
}
}