mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 21:24:00 +08:00
57918dfadf
The driver is only supported on DT enabled platforms. Convert the driver to DT so that it can probe properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
47 lines
1.1 KiB
Plaintext
47 lines
1.1 KiB
Plaintext
Qualcomm PM8xxx PMIC Power Key
|
|
|
|
PROPERTIES
|
|
|
|
- compatible:
|
|
Usage: required
|
|
Value type: <string>
|
|
Definition: must be one of:
|
|
"qcom,pm8058-pwrkey"
|
|
"qcom,pm8921-pwrkey"
|
|
|
|
- reg:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: address of power key control register
|
|
|
|
- interrupts:
|
|
Usage: required
|
|
Value type: <prop-encoded-array>
|
|
Definition: the first interrupt specifies the key release interrupt
|
|
and the second interrupt specifies the key press interrupt.
|
|
The format of the specifier is defined by the binding
|
|
document describing the node's interrupt parent.
|
|
|
|
- debounce:
|
|
Usage: optional
|
|
Value type: <u32>
|
|
Definition: time in microseconds that key must be pressed or release
|
|
for state change interrupt to trigger.
|
|
|
|
- pull-up:
|
|
Usage: optional
|
|
Value type: <empty>
|
|
Definition: presence of this property indicates that the KPDPWR_N pin
|
|
should be configured for pull up.
|
|
|
|
EXAMPLE
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8921-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|