mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 21:24:00 +08:00
f30c226954
Many files include the filename at the beginning, serveral used a wrong one. Signed-off-by: Uwe Zeisberger <Uwe_Zeisberger@digi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
1283 lines
32 KiB
C
1283 lines
32 KiB
C
/*
|
|
* sound/oss/pss.c
|
|
*
|
|
* The low level driver for the Personal Sound System (ECHO ESC614).
|
|
*
|
|
*
|
|
* Copyright (C) by Hannu Savolainen 1993-1997
|
|
*
|
|
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
|
|
* Version 2 (June 1991). See the "COPYING" file distributed with this software
|
|
* for more info.
|
|
*
|
|
*
|
|
* Thomas Sailer ioctl code reworked (vmalloc/vfree removed)
|
|
* Alan Cox modularisation, clean up.
|
|
*
|
|
* 98-02-21: Vladimir Michl <vladimir.michl@upol.cz>
|
|
* Added mixer device for Beethoven ADSP-16 (master volume,
|
|
* bass, treble, synth), only for speakers.
|
|
* Fixed bug in pss_write (exchange parameters)
|
|
* Fixed config port of SB
|
|
* Requested two regions for PSS (PSS mixer, PSS config)
|
|
* Modified pss_download_boot
|
|
* To probe_pss_mss added test for initialize AD1848
|
|
* 98-05-28: Vladimir Michl <vladimir.michl@upol.cz>
|
|
* Fixed computation of mixer volumes
|
|
* 04-05-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
|
|
* Added code that allows the user to enable his cdrom and/or
|
|
* joystick through the module parameters pss_cdrom_port and
|
|
* pss_enable_joystick. pss_cdrom_port takes a port address as its
|
|
* argument. pss_enable_joystick takes either a 0 or a non-0 as its
|
|
* argument.
|
|
* 04-06-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
|
|
* Separated some code into new functions for easier reuse.
|
|
* Cleaned up and streamlined new code. Added code to allow a user
|
|
* to only use this driver for enabling non-sound components
|
|
* through the new module parameter pss_no_sound (flag). Added
|
|
* code that would allow a user to decide whether the driver should
|
|
* reset the configured hardware settings for the PSS board through
|
|
* the module parameter pss_keep_settings (flag). This flag will
|
|
* allow a user to free up resources in use by this card if needbe,
|
|
* furthermore it allows him to use this driver to just enable the
|
|
* emulations and then be unloaded as it is no longer needed. Both
|
|
* new settings are only available to this driver if compiled as a
|
|
* module. The default settings of all new parameters are set to
|
|
* load the driver as it did in previous versions.
|
|
* 04-07-1999: Anthony Barbachan <barbcode@xmen.cis.fordham.edu>
|
|
* Added module parameter pss_firmware to allow the user to tell
|
|
* the driver where the fireware file is located. The default
|
|
* setting is the previous hardcoded setting "/etc/sound/pss_synth".
|
|
* 00-03-03: Christoph Hellwig <chhellwig@infradead.org>
|
|
* Adapted to module_init/module_exit
|
|
* 11-10-2000: Bartlomiej Zolnierkiewicz <bkz@linux-ide.org>
|
|
* Added __init to probe_pss(), attach_pss() and probe_pss_mpu()
|
|
* 02-Jan-2001: Chris Rankin
|
|
* Specify that this module owns the coprocessor
|
|
*/
|
|
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "sound_config.h"
|
|
#include "sound_firmware.h"
|
|
|
|
#include "ad1848.h"
|
|
#include "mpu401.h"
|
|
|
|
/*
|
|
* PSS registers.
|
|
*/
|
|
#define REG(x) (devc->base+x)
|
|
#define PSS_DATA 0
|
|
#define PSS_STATUS 2
|
|
#define PSS_CONTROL 2
|
|
#define PSS_ID 4
|
|
#define PSS_IRQACK 4
|
|
#define PSS_PIO 0x1a
|
|
|
|
/*
|
|
* Config registers
|
|
*/
|
|
#define CONF_PSS 0x10
|
|
#define CONF_WSS 0x12
|
|
#define CONF_SB 0x14
|
|
#define CONF_CDROM 0x16
|
|
#define CONF_MIDI 0x18
|
|
|
|
/*
|
|
* Status bits.
|
|
*/
|
|
#define PSS_FLAG3 0x0800
|
|
#define PSS_FLAG2 0x0400
|
|
#define PSS_FLAG1 0x1000
|
|
#define PSS_FLAG0 0x0800
|
|
#define PSS_WRITE_EMPTY 0x8000
|
|
#define PSS_READ_FULL 0x4000
|
|
|
|
/*
|
|
* WSS registers
|
|
*/
|
|
#define WSS_INDEX 4
|
|
#define WSS_DATA 5
|
|
|
|
/*
|
|
* WSS status bits
|
|
*/
|
|
#define WSS_INITIALIZING 0x80
|
|
#define WSS_AUTOCALIBRATION 0x20
|
|
|
|
#define NO_WSS_MIXER -1
|
|
|
|
#include "coproc.h"
|
|
|
|
#include "pss_boot.h"
|
|
|
|
/* If compiled into kernel, it enable or disable pss mixer */
|
|
#ifdef CONFIG_PSS_MIXER
|
|
static int pss_mixer = 1;
|
|
#else
|
|
static int pss_mixer;
|
|
#endif
|
|
|
|
|
|
typedef struct pss_mixerdata {
|
|
unsigned int volume_l;
|
|
unsigned int volume_r;
|
|
unsigned int bass;
|
|
unsigned int treble;
|
|
unsigned int synth;
|
|
} pss_mixerdata;
|
|
|
|
typedef struct pss_confdata {
|
|
int base;
|
|
int irq;
|
|
int dma;
|
|
int *osp;
|
|
pss_mixerdata mixer;
|
|
int ad_mixer_dev;
|
|
} pss_confdata;
|
|
|
|
static pss_confdata pss_data;
|
|
static pss_confdata *devc = &pss_data;
|
|
static DEFINE_SPINLOCK(lock);
|
|
|
|
static int pss_initialized;
|
|
static int nonstandard_microcode;
|
|
static int pss_cdrom_port = -1; /* Parameter for the PSS cdrom port */
|
|
static int pss_enable_joystick; /* Parameter for enabling the joystick */
|
|
static coproc_operations pss_coproc_operations;
|
|
|
|
static void pss_write(pss_confdata *devc, int data)
|
|
{
|
|
unsigned long i, limit;
|
|
|
|
limit = jiffies + HZ/10; /* The timeout is 0.1 seconds */
|
|
/*
|
|
* Note! the i<5000000 is an emergency exit. The dsp_command() is sometimes
|
|
* called while interrupts are disabled. This means that the timer is
|
|
* disabled also. However the timeout situation is a abnormal condition.
|
|
* Normally the DSP should be ready to accept commands after just couple of
|
|
* loops.
|
|
*/
|
|
|
|
for (i = 0; i < 5000000 && time_before(jiffies, limit); i++)
|
|
{
|
|
if (inw(REG(PSS_STATUS)) & PSS_WRITE_EMPTY)
|
|
{
|
|
outw(data, REG(PSS_DATA));
|
|
return;
|
|
}
|
|
}
|
|
printk(KERN_WARNING "PSS: DSP Command (%04x) Timeout.\n", data);
|
|
}
|
|
|
|
static int __init probe_pss(struct address_info *hw_config)
|
|
{
|
|
unsigned short id;
|
|
int irq, dma;
|
|
|
|
devc->base = hw_config->io_base;
|
|
irq = devc->irq = hw_config->irq;
|
|
dma = devc->dma = hw_config->dma;
|
|
devc->osp = hw_config->osp;
|
|
|
|
if (devc->base != 0x220 && devc->base != 0x240)
|
|
if (devc->base != 0x230 && devc->base != 0x250) /* Some cards use these */
|
|
return 0;
|
|
|
|
if (!request_region(devc->base, 0x10, "PSS mixer, SB emulation")) {
|
|
printk(KERN_ERR "PSS: I/O port conflict\n");
|
|
return 0;
|
|
}
|
|
id = inw(REG(PSS_ID));
|
|
if ((id >> 8) != 'E') {
|
|
printk(KERN_ERR "No PSS signature detected at 0x%x (0x%x)\n", devc->base, id);
|
|
release_region(devc->base, 0x10);
|
|
return 0;
|
|
}
|
|
if (!request_region(devc->base + 0x10, 0x9, "PSS config")) {
|
|
printk(KERN_ERR "PSS: I/O port conflict\n");
|
|
release_region(devc->base, 0x10);
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int set_irq(pss_confdata * devc, int dev, int irq)
|
|
{
|
|
static unsigned short irq_bits[16] =
|
|
{
|
|
0x0000, 0x0000, 0x0000, 0x0008,
|
|
0x0000, 0x0010, 0x0000, 0x0018,
|
|
0x0000, 0x0020, 0x0028, 0x0030,
|
|
0x0038, 0x0000, 0x0000, 0x0000
|
|
};
|
|
|
|
unsigned short tmp, bits;
|
|
|
|
if (irq < 0 || irq > 15)
|
|
return 0;
|
|
|
|
tmp = inw(REG(dev)) & ~0x38; /* Load confreg, mask IRQ bits out */
|
|
|
|
if ((bits = irq_bits[irq]) == 0 && irq != 0)
|
|
{
|
|
printk(KERN_ERR "PSS: Invalid IRQ %d\n", irq);
|
|
return 0;
|
|
}
|
|
outw(tmp | bits, REG(dev));
|
|
return 1;
|
|
}
|
|
|
|
static int set_io_base(pss_confdata * devc, int dev, int base)
|
|
{
|
|
unsigned short tmp = inw(REG(dev)) & 0x003f;
|
|
unsigned short bits = (base & 0x0ffc) << 4;
|
|
|
|
outw(bits | tmp, REG(dev));
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int set_dma(pss_confdata * devc, int dev, int dma)
|
|
{
|
|
static unsigned short dma_bits[8] =
|
|
{
|
|
0x0001, 0x0002, 0x0000, 0x0003,
|
|
0x0000, 0x0005, 0x0006, 0x0007
|
|
};
|
|
|
|
unsigned short tmp, bits;
|
|
|
|
if (dma < 0 || dma > 7)
|
|
return 0;
|
|
|
|
tmp = inw(REG(dev)) & ~0x07; /* Load confreg, mask DMA bits out */
|
|
|
|
if ((bits = dma_bits[dma]) == 0 && dma != 4)
|
|
{
|
|
printk(KERN_ERR "PSS: Invalid DMA %d\n", dma);
|
|
return 0;
|
|
}
|
|
outw(tmp | bits, REG(dev));
|
|
return 1;
|
|
}
|
|
|
|
static int pss_reset_dsp(pss_confdata * devc)
|
|
{
|
|
unsigned long i, limit = jiffies + HZ/10;
|
|
|
|
outw(0x2000, REG(PSS_CONTROL));
|
|
for (i = 0; i < 32768 && (limit-jiffies >= 0); i++)
|
|
inw(REG(PSS_CONTROL));
|
|
outw(0x0000, REG(PSS_CONTROL));
|
|
return 1;
|
|
}
|
|
|
|
static int pss_put_dspword(pss_confdata * devc, unsigned short word)
|
|
{
|
|
int i, val;
|
|
|
|
for (i = 0; i < 327680; i++)
|
|
{
|
|
val = inw(REG(PSS_STATUS));
|
|
if (val & PSS_WRITE_EMPTY)
|
|
{
|
|
outw(word, REG(PSS_DATA));
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pss_get_dspword(pss_confdata * devc, unsigned short *word)
|
|
{
|
|
int i, val;
|
|
|
|
for (i = 0; i < 327680; i++)
|
|
{
|
|
val = inw(REG(PSS_STATUS));
|
|
if (val & PSS_READ_FULL)
|
|
{
|
|
*word = inw(REG(PSS_DATA));
|
|
return 1;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int pss_download_boot(pss_confdata * devc, unsigned char *block, int size, int flags)
|
|
{
|
|
int i, val, count;
|
|
unsigned long limit;
|
|
|
|
if (flags & CPF_FIRST)
|
|
{
|
|
/*_____ Warn DSP software that a boot is coming */
|
|
outw(0x00fe, REG(PSS_DATA));
|
|
|
|
limit = jiffies + HZ/10;
|
|
for (i = 0; i < 32768 && time_before(jiffies, limit); i++)
|
|
if (inw(REG(PSS_DATA)) == 0x5500)
|
|
break;
|
|
|
|
outw(*block++, REG(PSS_DATA));
|
|
pss_reset_dsp(devc);
|
|
}
|
|
count = 1;
|
|
while ((flags&CPF_LAST) || count<size )
|
|
{
|
|
int j;
|
|
|
|
for (j = 0; j < 327670; j++)
|
|
{
|
|
/*_____ Wait for BG to appear */
|
|
if (inw(REG(PSS_STATUS)) & PSS_FLAG3)
|
|
break;
|
|
}
|
|
|
|
if (j == 327670)
|
|
{
|
|
/* It's ok we timed out when the file was empty */
|
|
if (count >= size && flags & CPF_LAST)
|
|
break;
|
|
else
|
|
{
|
|
printk("\n");
|
|
printk(KERN_ERR "PSS: Download timeout problems, byte %d=%d\n", count, size);
|
|
return 0;
|
|
}
|
|
}
|
|
/*_____ Send the next byte */
|
|
if (count >= size)
|
|
{
|
|
/* If not data in block send 0xffff */
|
|
outw (0xffff, REG (PSS_DATA));
|
|
}
|
|
else
|
|
{
|
|
/*_____ Send the next byte */
|
|
outw (*block++, REG (PSS_DATA));
|
|
};
|
|
count++;
|
|
}
|
|
|
|
if (flags & CPF_LAST)
|
|
{
|
|
/*_____ Why */
|
|
outw(0, REG(PSS_DATA));
|
|
|
|
limit = jiffies + HZ/10;
|
|
for (i = 0; i < 32768 && (limit - jiffies >= 0); i++)
|
|
val = inw(REG(PSS_STATUS));
|
|
|
|
limit = jiffies + HZ/10;
|
|
for (i = 0; i < 32768 && (limit-jiffies >= 0); i++)
|
|
{
|
|
val = inw(REG(PSS_STATUS));
|
|
if (val & 0x4000)
|
|
break;
|
|
}
|
|
|
|
/* now read the version */
|
|
for (i = 0; i < 32000; i++)
|
|
{
|
|
val = inw(REG(PSS_STATUS));
|
|
if (val & PSS_READ_FULL)
|
|
break;
|
|
}
|
|
if (i == 32000)
|
|
return 0;
|
|
|
|
val = inw(REG(PSS_DATA));
|
|
/* printk( "<PSS: microcode version %d.%d loaded>", val/16, val % 16); */
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* Mixer */
|
|
static void set_master_volume(pss_confdata *devc, int left, int right)
|
|
{
|
|
static unsigned char log_scale[101] = {
|
|
0xdb, 0xe0, 0xe3, 0xe5, 0xe7, 0xe9, 0xea, 0xeb, 0xec, 0xed, 0xed, 0xee,
|
|
0xef, 0xef, 0xf0, 0xf0, 0xf1, 0xf1, 0xf2, 0xf2, 0xf2, 0xf3, 0xf3, 0xf3,
|
|
0xf4, 0xf4, 0xf4, 0xf5, 0xf5, 0xf5, 0xf5, 0xf6, 0xf6, 0xf6, 0xf6, 0xf7,
|
|
0xf7, 0xf7, 0xf7, 0xf7, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf9, 0xf9, 0xf9,
|
|
0xf9, 0xf9, 0xf9, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfa, 0xfb, 0xfb,
|
|
0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfb, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc, 0xfc,
|
|
0xfc, 0xfc, 0xfc, 0xfc, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd, 0xfd,
|
|
0xfd, 0xfd, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe,
|
|
0xfe, 0xfe, 0xff, 0xff, 0xff
|
|
};
|
|
pss_write(devc, 0x0010);
|
|
pss_write(devc, log_scale[left] | 0x0000);
|
|
pss_write(devc, 0x0010);
|
|
pss_write(devc, log_scale[right] | 0x0100);
|
|
}
|
|
|
|
static void set_synth_volume(pss_confdata *devc, int volume)
|
|
{
|
|
int vol = ((0x8000*volume)/100L);
|
|
pss_write(devc, 0x0080);
|
|
pss_write(devc, vol);
|
|
pss_write(devc, 0x0081);
|
|
pss_write(devc, vol);
|
|
}
|
|
|
|
static void set_bass(pss_confdata *devc, int level)
|
|
{
|
|
int vol = (int)(((0xfd - 0xf0) * level)/100L) + 0xf0;
|
|
pss_write(devc, 0x0010);
|
|
pss_write(devc, vol | 0x0200);
|
|
};
|
|
|
|
static void set_treble(pss_confdata *devc, int level)
|
|
{
|
|
int vol = (((0xfd - 0xf0) * level)/100L) + 0xf0;
|
|
pss_write(devc, 0x0010);
|
|
pss_write(devc, vol | 0x0300);
|
|
};
|
|
|
|
static void pss_mixer_reset(pss_confdata *devc)
|
|
{
|
|
set_master_volume(devc, 33, 33);
|
|
set_bass(devc, 50);
|
|
set_treble(devc, 50);
|
|
set_synth_volume(devc, 30);
|
|
pss_write (devc, 0x0010);
|
|
pss_write (devc, 0x0800 | 0xce); /* Stereo */
|
|
|
|
if(pss_mixer)
|
|
{
|
|
devc->mixer.volume_l = devc->mixer.volume_r = 33;
|
|
devc->mixer.bass = 50;
|
|
devc->mixer.treble = 50;
|
|
devc->mixer.synth = 30;
|
|
}
|
|
}
|
|
|
|
static int set_volume_mono(unsigned __user *p, int *aleft)
|
|
{
|
|
int left;
|
|
unsigned volume;
|
|
if (get_user(volume, p))
|
|
return -EFAULT;
|
|
|
|
left = volume & 0xff;
|
|
if (left > 100)
|
|
left = 100;
|
|
*aleft = left;
|
|
return 0;
|
|
}
|
|
|
|
static int set_volume_stereo(unsigned __user *p, int *aleft, int *aright)
|
|
{
|
|
int left, right;
|
|
unsigned volume;
|
|
if (get_user(volume, p))
|
|
return -EFAULT;
|
|
|
|
left = volume & 0xff;
|
|
if (left > 100)
|
|
left = 100;
|
|
right = (volume >> 8) & 0xff;
|
|
if (right > 100)
|
|
right = 100;
|
|
*aleft = left;
|
|
*aright = right;
|
|
return 0;
|
|
}
|
|
|
|
static int ret_vol_mono(int left)
|
|
{
|
|
return ((left << 8) | left);
|
|
}
|
|
|
|
static int ret_vol_stereo(int left, int right)
|
|
{
|
|
return ((right << 8) | left);
|
|
}
|
|
|
|
static int call_ad_mixer(pss_confdata *devc,unsigned int cmd, void __user *arg)
|
|
{
|
|
if (devc->ad_mixer_dev != NO_WSS_MIXER)
|
|
return mixer_devs[devc->ad_mixer_dev]->ioctl(devc->ad_mixer_dev, cmd, arg);
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int pss_mixer_ioctl (int dev, unsigned int cmd, void __user *arg)
|
|
{
|
|
pss_confdata *devc = mixer_devs[dev]->devc;
|
|
int cmdf = cmd & 0xff;
|
|
|
|
if ((cmdf != SOUND_MIXER_VOLUME) && (cmdf != SOUND_MIXER_BASS) &&
|
|
(cmdf != SOUND_MIXER_TREBLE) && (cmdf != SOUND_MIXER_SYNTH) &&
|
|
(cmdf != SOUND_MIXER_DEVMASK) && (cmdf != SOUND_MIXER_STEREODEVS) &&
|
|
(cmdf != SOUND_MIXER_RECMASK) && (cmdf != SOUND_MIXER_CAPS) &&
|
|
(cmdf != SOUND_MIXER_RECSRC))
|
|
{
|
|
return call_ad_mixer(devc, cmd, arg);
|
|
}
|
|
|
|
if (((cmd >> 8) & 0xff) != 'M')
|
|
return -EINVAL;
|
|
|
|
if (_SIOC_DIR (cmd) & _SIOC_WRITE)
|
|
{
|
|
switch (cmdf)
|
|
{
|
|
case SOUND_MIXER_RECSRC:
|
|
if (devc->ad_mixer_dev != NO_WSS_MIXER)
|
|
return call_ad_mixer(devc, cmd, arg);
|
|
else
|
|
{
|
|
int v;
|
|
if (get_user(v, (int __user *)arg))
|
|
return -EFAULT;
|
|
if (v != 0)
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
case SOUND_MIXER_VOLUME:
|
|
if (set_volume_stereo(arg,
|
|
&devc->mixer.volume_l,
|
|
&devc->mixer.volume_r))
|
|
return -EFAULT;
|
|
set_master_volume(devc, devc->mixer.volume_l,
|
|
devc->mixer.volume_r);
|
|
return ret_vol_stereo(devc->mixer.volume_l,
|
|
devc->mixer.volume_r);
|
|
|
|
case SOUND_MIXER_BASS:
|
|
if (set_volume_mono(arg, &devc->mixer.bass))
|
|
return -EFAULT;
|
|
set_bass(devc, devc->mixer.bass);
|
|
return ret_vol_mono(devc->mixer.bass);
|
|
|
|
case SOUND_MIXER_TREBLE:
|
|
if (set_volume_mono(arg, &devc->mixer.treble))
|
|
return -EFAULT;
|
|
set_treble(devc, devc->mixer.treble);
|
|
return ret_vol_mono(devc->mixer.treble);
|
|
|
|
case SOUND_MIXER_SYNTH:
|
|
if (set_volume_mono(arg, &devc->mixer.synth))
|
|
return -EFAULT;
|
|
set_synth_volume(devc, devc->mixer.synth);
|
|
return ret_vol_mono(devc->mixer.synth);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
int val, and_mask = 0, or_mask = 0;
|
|
/*
|
|
* Return parameters
|
|
*/
|
|
switch (cmdf)
|
|
{
|
|
case SOUND_MIXER_DEVMASK:
|
|
if (call_ad_mixer(devc, cmd, arg) == -EINVAL)
|
|
break;
|
|
and_mask = ~0;
|
|
or_mask = SOUND_MASK_VOLUME | SOUND_MASK_BASS | SOUND_MASK_TREBLE | SOUND_MASK_SYNTH;
|
|
break;
|
|
|
|
case SOUND_MIXER_STEREODEVS:
|
|
if (call_ad_mixer(devc, cmd, arg) == -EINVAL)
|
|
break;
|
|
and_mask = ~0;
|
|
or_mask = SOUND_MASK_VOLUME;
|
|
break;
|
|
|
|
case SOUND_MIXER_RECMASK:
|
|
if (devc->ad_mixer_dev != NO_WSS_MIXER)
|
|
return call_ad_mixer(devc, cmd, arg);
|
|
break;
|
|
|
|
case SOUND_MIXER_CAPS:
|
|
if (devc->ad_mixer_dev != NO_WSS_MIXER)
|
|
return call_ad_mixer(devc, cmd, arg);
|
|
or_mask = SOUND_CAP_EXCL_INPUT;
|
|
break;
|
|
|
|
case SOUND_MIXER_RECSRC:
|
|
if (devc->ad_mixer_dev != NO_WSS_MIXER)
|
|
return call_ad_mixer(devc, cmd, arg);
|
|
break;
|
|
|
|
case SOUND_MIXER_VOLUME:
|
|
or_mask = ret_vol_stereo(devc->mixer.volume_l, devc->mixer.volume_r);
|
|
break;
|
|
|
|
case SOUND_MIXER_BASS:
|
|
or_mask = ret_vol_mono(devc->mixer.bass);
|
|
break;
|
|
|
|
case SOUND_MIXER_TREBLE:
|
|
or_mask = ret_vol_mono(devc->mixer.treble);
|
|
break;
|
|
|
|
case SOUND_MIXER_SYNTH:
|
|
or_mask = ret_vol_mono(devc->mixer.synth);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
if (get_user(val, (int __user *)arg))
|
|
return -EFAULT;
|
|
val &= and_mask;
|
|
val |= or_mask;
|
|
if (put_user(val, (int __user *)arg))
|
|
return -EFAULT;
|
|
return val;
|
|
}
|
|
}
|
|
|
|
static struct mixer_operations pss_mixer_operations =
|
|
{
|
|
.owner = THIS_MODULE,
|
|
.id = "SOUNDPORT",
|
|
.name = "PSS-AD1848",
|
|
.ioctl = pss_mixer_ioctl
|
|
};
|
|
|
|
static void disable_all_emulations(void)
|
|
{
|
|
outw(0x0000, REG(CONF_PSS)); /* 0x0400 enables joystick */
|
|
outw(0x0000, REG(CONF_WSS));
|
|
outw(0x0000, REG(CONF_SB));
|
|
outw(0x0000, REG(CONF_MIDI));
|
|
outw(0x0000, REG(CONF_CDROM));
|
|
}
|
|
|
|
static void configure_nonsound_components(void)
|
|
{
|
|
/* Configure Joystick port */
|
|
|
|
if(pss_enable_joystick)
|
|
{
|
|
outw(0x0400, REG(CONF_PSS)); /* 0x0400 enables joystick */
|
|
printk(KERN_INFO "PSS: joystick enabled.\n");
|
|
}
|
|
else
|
|
{
|
|
printk(KERN_INFO "PSS: joystick port not enabled.\n");
|
|
}
|
|
|
|
/* Configure CDROM port */
|
|
|
|
if(pss_cdrom_port == -1) /* If cdrom port enablation wasn't requested */
|
|
{
|
|
printk(KERN_INFO "PSS: CDROM port not enabled.\n");
|
|
}
|
|
else if(check_region(pss_cdrom_port, 2))
|
|
{
|
|
printk(KERN_ERR "PSS: CDROM I/O port conflict.\n");
|
|
}
|
|
else if(!set_io_base(devc, CONF_CDROM, pss_cdrom_port))
|
|
{
|
|
printk(KERN_ERR "PSS: CDROM I/O port could not be set.\n");
|
|
}
|
|
else /* CDROM port successfully configured */
|
|
{
|
|
printk(KERN_INFO "PSS: CDROM I/O port set to 0x%x.\n", pss_cdrom_port);
|
|
}
|
|
}
|
|
|
|
static int __init attach_pss(struct address_info *hw_config)
|
|
{
|
|
unsigned short id;
|
|
char tmp[100];
|
|
|
|
devc->base = hw_config->io_base;
|
|
devc->irq = hw_config->irq;
|
|
devc->dma = hw_config->dma;
|
|
devc->osp = hw_config->osp;
|
|
devc->ad_mixer_dev = NO_WSS_MIXER;
|
|
|
|
if (!probe_pss(hw_config))
|
|
return 0;
|
|
|
|
id = inw(REG(PSS_ID)) & 0x00ff;
|
|
|
|
/*
|
|
* Disable all emulations. Will be enabled later (if required).
|
|
*/
|
|
|
|
disable_all_emulations();
|
|
|
|
#ifdef YOU_REALLY_WANT_TO_ALLOCATE_THESE_RESOURCES
|
|
if (sound_alloc_dma(hw_config->dma, "PSS"))
|
|
{
|
|
printk("pss.c: Can't allocate DMA channel.\n");
|
|
release_region(hw_config->io_base, 0x10);
|
|
release_region(hw_config->io_base+0x10, 0x9);
|
|
return 0;
|
|
}
|
|
if (!set_irq(devc, CONF_PSS, devc->irq))
|
|
{
|
|
printk("PSS: IRQ allocation error.\n");
|
|
release_region(hw_config->io_base, 0x10);
|
|
release_region(hw_config->io_base+0x10, 0x9);
|
|
return 0;
|
|
}
|
|
if (!set_dma(devc, CONF_PSS, devc->dma))
|
|
{
|
|
printk(KERN_ERR "PSS: DMA allocation error\n");
|
|
release_region(hw_config->io_base, 0x10);
|
|
release_region(hw_config->io_base+0x10, 0x9);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
configure_nonsound_components();
|
|
pss_initialized = 1;
|
|
sprintf(tmp, "ECHO-PSS Rev. %d", id);
|
|
conf_printf(tmp, hw_config);
|
|
return 1;
|
|
}
|
|
|
|
static int __init probe_pss_mpu(struct address_info *hw_config)
|
|
{
|
|
struct resource *ports;
|
|
int timeout;
|
|
|
|
if (!pss_initialized)
|
|
return 0;
|
|
|
|
ports = request_region(hw_config->io_base, 2, "mpu401");
|
|
|
|
if (!ports) {
|
|
printk(KERN_ERR "PSS: MPU I/O port conflict\n");
|
|
return 0;
|
|
}
|
|
if (!set_io_base(devc, CONF_MIDI, hw_config->io_base)) {
|
|
printk(KERN_ERR "PSS: MIDI base could not be set.\n");
|
|
goto fail;
|
|
}
|
|
if (!set_irq(devc, CONF_MIDI, hw_config->irq)) {
|
|
printk(KERN_ERR "PSS: MIDI IRQ allocation error.\n");
|
|
goto fail;
|
|
}
|
|
if (!pss_synthLen) {
|
|
printk(KERN_ERR "PSS: Can't enable MPU. MIDI synth microcode not available.\n");
|
|
goto fail;
|
|
}
|
|
if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST)) {
|
|
printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Finally wait until the DSP algorithm has initialized itself and
|
|
* deactivates receive interrupt.
|
|
*/
|
|
|
|
for (timeout = 900000; timeout > 0; timeout--)
|
|
{
|
|
if ((inb(hw_config->io_base + 1) & 0x80) == 0) /* Input data avail */
|
|
inb(hw_config->io_base); /* Discard it */
|
|
else
|
|
break; /* No more input */
|
|
}
|
|
|
|
if (!probe_mpu401(hw_config, ports))
|
|
goto fail;
|
|
|
|
attach_mpu401(hw_config, THIS_MODULE); /* Slot 1 */
|
|
if (hw_config->slots[1] != -1) /* The MPU driver installed itself */
|
|
midi_devs[hw_config->slots[1]]->coproc = &pss_coproc_operations;
|
|
return 1;
|
|
fail:
|
|
release_region(hw_config->io_base, 2);
|
|
return 0;
|
|
}
|
|
|
|
static int pss_coproc_open(void *dev_info, int sub_device)
|
|
{
|
|
switch (sub_device)
|
|
{
|
|
case COPR_MIDI:
|
|
if (pss_synthLen == 0)
|
|
{
|
|
printk(KERN_ERR "PSS: MIDI synth microcode not available.\n");
|
|
return -EIO;
|
|
}
|
|
if (nonstandard_microcode)
|
|
if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST))
|
|
{
|
|
printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n");
|
|
return -EIO;
|
|
}
|
|
nonstandard_microcode = 0;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pss_coproc_close(void *dev_info, int sub_device)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static void pss_coproc_reset(void *dev_info)
|
|
{
|
|
if (pss_synthLen)
|
|
if (!pss_download_boot(devc, pss_synth, pss_synthLen, CPF_FIRST | CPF_LAST))
|
|
{
|
|
printk(KERN_ERR "PSS: Unable to load MIDI synth microcode to DSP.\n");
|
|
}
|
|
nonstandard_microcode = 0;
|
|
}
|
|
|
|
static int download_boot_block(void *dev_info, copr_buffer * buf)
|
|
{
|
|
if (buf->len <= 0 || buf->len > sizeof(buf->data))
|
|
return -EINVAL;
|
|
|
|
if (!pss_download_boot(devc, buf->data, buf->len, buf->flags))
|
|
{
|
|
printk(KERN_ERR "PSS: Unable to load microcode block to DSP.\n");
|
|
return -EIO;
|
|
}
|
|
nonstandard_microcode = 1; /* The MIDI microcode has been overwritten */
|
|
return 0;
|
|
}
|
|
|
|
static int pss_coproc_ioctl(void *dev_info, unsigned int cmd, void __user *arg, int local)
|
|
{
|
|
copr_buffer *buf;
|
|
copr_msg *mbuf;
|
|
copr_debug_buf dbuf;
|
|
unsigned short tmp;
|
|
unsigned long flags;
|
|
unsigned short *data;
|
|
int i, err;
|
|
/* printk( "PSS coproc ioctl %x %x %d\n", cmd, arg, local); */
|
|
|
|
switch (cmd)
|
|
{
|
|
case SNDCTL_COPR_RESET:
|
|
pss_coproc_reset(dev_info);
|
|
return 0;
|
|
|
|
case SNDCTL_COPR_LOAD:
|
|
buf = (copr_buffer *) vmalloc(sizeof(copr_buffer));
|
|
if (buf == NULL)
|
|
return -ENOSPC;
|
|
if (copy_from_user(buf, arg, sizeof(copr_buffer))) {
|
|
vfree(buf);
|
|
return -EFAULT;
|
|
}
|
|
err = download_boot_block(dev_info, buf);
|
|
vfree(buf);
|
|
return err;
|
|
|
|
case SNDCTL_COPR_SENDMSG:
|
|
mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
|
|
if (mbuf == NULL)
|
|
return -ENOSPC;
|
|
if (copy_from_user(mbuf, arg, sizeof(copr_msg))) {
|
|
vfree(mbuf);
|
|
return -EFAULT;
|
|
}
|
|
data = (unsigned short *)(mbuf->data);
|
|
spin_lock_irqsave(&lock, flags);
|
|
for (i = 0; i < mbuf->len; i++) {
|
|
if (!pss_put_dspword(devc, *data++)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
mbuf->len = i; /* feed back number of WORDs sent */
|
|
err = copy_to_user(arg, mbuf, sizeof(copr_msg));
|
|
vfree(mbuf);
|
|
return err ? -EFAULT : -EIO;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
vfree(mbuf);
|
|
return 0;
|
|
|
|
case SNDCTL_COPR_RCVMSG:
|
|
err = 0;
|
|
mbuf = (copr_msg *)vmalloc(sizeof(copr_msg));
|
|
if (mbuf == NULL)
|
|
return -ENOSPC;
|
|
data = (unsigned short *)mbuf->data;
|
|
spin_lock_irqsave(&lock, flags);
|
|
for (i = 0; i < sizeof(mbuf->data)/sizeof(unsigned short); i++) {
|
|
mbuf->len = i; /* feed back number of WORDs read */
|
|
if (!pss_get_dspword(devc, data++)) {
|
|
if (i == 0)
|
|
err = -EIO;
|
|
break;
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
if (copy_to_user(arg, mbuf, sizeof(copr_msg)))
|
|
err = -EFAULT;
|
|
vfree(mbuf);
|
|
return err;
|
|
|
|
case SNDCTL_COPR_RDATA:
|
|
if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
|
|
return -EFAULT;
|
|
spin_lock_irqsave(&lock, flags);
|
|
if (!pss_put_dspword(devc, 0x00d0)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
if (!pss_get_dspword(devc, &tmp)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
dbuf.parm1 = tmp;
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
if (copy_to_user(arg, &dbuf, sizeof(dbuf)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case SNDCTL_COPR_WDATA:
|
|
if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
|
|
return -EFAULT;
|
|
spin_lock_irqsave(&lock, flags);
|
|
if (!pss_put_dspword(devc, 0x00d1)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
if (!pss_put_dspword(devc, (unsigned short) (dbuf.parm1 & 0xffff))) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
tmp = (unsigned int)dbuf.parm2 & 0xffff;
|
|
if (!pss_put_dspword(devc, tmp)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return 0;
|
|
|
|
case SNDCTL_COPR_WCODE:
|
|
if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
|
|
return -EFAULT;
|
|
spin_lock_irqsave(&lock, flags);
|
|
if (!pss_put_dspword(devc, 0x00d3)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
tmp = (unsigned int)dbuf.parm2 & 0x00ff;
|
|
if (!pss_put_dspword(devc, tmp)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
tmp = ((unsigned int)dbuf.parm2 >> 8) & 0xffff;
|
|
if (!pss_put_dspword(devc, tmp)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return 0;
|
|
|
|
case SNDCTL_COPR_RCODE:
|
|
if (copy_from_user(&dbuf, arg, sizeof(dbuf)))
|
|
return -EFAULT;
|
|
spin_lock_irqsave(&lock, flags);
|
|
if (!pss_put_dspword(devc, 0x00d2)) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
if (!pss_put_dspword(devc, (unsigned short)(dbuf.parm1 & 0xffff))) {
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
if (!pss_get_dspword(devc, &tmp)) { /* Read MSB */
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
dbuf.parm1 = tmp << 8;
|
|
if (!pss_get_dspword(devc, &tmp)) { /* Read LSB */
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
return -EIO;
|
|
}
|
|
dbuf.parm1 |= tmp & 0x00ff;
|
|
spin_unlock_irqrestore(&lock,flags);
|
|
if (copy_to_user(arg, &dbuf, sizeof(dbuf)))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static coproc_operations pss_coproc_operations =
|
|
{
|
|
"ADSP-2115",
|
|
THIS_MODULE,
|
|
pss_coproc_open,
|
|
pss_coproc_close,
|
|
pss_coproc_ioctl,
|
|
pss_coproc_reset,
|
|
&pss_data
|
|
};
|
|
|
|
static int __init probe_pss_mss(struct address_info *hw_config)
|
|
{
|
|
volatile int timeout;
|
|
struct resource *ports;
|
|
int my_mix = -999; /* gcc shut up */
|
|
|
|
if (!pss_initialized)
|
|
return 0;
|
|
|
|
if (!request_region(hw_config->io_base, 4, "WSS config")) {
|
|
printk(KERN_ERR "PSS: WSS I/O port conflicts.\n");
|
|
return 0;
|
|
}
|
|
ports = request_region(hw_config->io_base + 4, 4, "ad1848");
|
|
if (!ports) {
|
|
printk(KERN_ERR "PSS: WSS I/O port conflicts.\n");
|
|
release_region(hw_config->io_base, 4);
|
|
return 0;
|
|
}
|
|
if (!set_io_base(devc, CONF_WSS, hw_config->io_base)) {
|
|
printk("PSS: WSS base not settable.\n");
|
|
goto fail;
|
|
}
|
|
if (!set_irq(devc, CONF_WSS, hw_config->irq)) {
|
|
printk("PSS: WSS IRQ allocation error.\n");
|
|
goto fail;
|
|
}
|
|
if (!set_dma(devc, CONF_WSS, hw_config->dma)) {
|
|
printk(KERN_ERR "PSS: WSS DMA allocation error\n");
|
|
goto fail;
|
|
}
|
|
/*
|
|
* For some reason the card returns 0xff in the WSS status register
|
|
* immediately after boot. Probably MIDI+SB emulation algorithm
|
|
* downloaded to the ADSP2115 spends some time initializing the card.
|
|
* Let's try to wait until it finishes this task.
|
|
*/
|
|
for (timeout = 0; timeout < 100000 && (inb(hw_config->io_base + WSS_INDEX) &
|
|
WSS_INITIALIZING); timeout++)
|
|
;
|
|
|
|
outb((0x0b), hw_config->io_base + WSS_INDEX); /* Required by some cards */
|
|
|
|
for (timeout = 0; (inb(hw_config->io_base + WSS_DATA) & WSS_AUTOCALIBRATION) &&
|
|
(timeout < 100000); timeout++)
|
|
;
|
|
|
|
if (!probe_ms_sound(hw_config, ports))
|
|
goto fail;
|
|
|
|
devc->ad_mixer_dev = NO_WSS_MIXER;
|
|
if (pss_mixer)
|
|
{
|
|
if ((my_mix = sound_install_mixer (MIXER_DRIVER_VERSION,
|
|
"PSS-SPEAKERS and AD1848 (through MSS audio codec)",
|
|
&pss_mixer_operations,
|
|
sizeof (struct mixer_operations),
|
|
devc)) < 0)
|
|
{
|
|
printk(KERN_ERR "Could not install PSS mixer\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
pss_mixer_reset(devc);
|
|
attach_ms_sound(hw_config, ports, THIS_MODULE); /* Slot 0 */
|
|
|
|
if (hw_config->slots[0] != -1)
|
|
{
|
|
/* The MSS driver installed itself */
|
|
audio_devs[hw_config->slots[0]]->coproc = &pss_coproc_operations;
|
|
if (pss_mixer && (num_mixers == (my_mix + 2)))
|
|
{
|
|
/* The MSS mixer installed */
|
|
devc->ad_mixer_dev = audio_devs[hw_config->slots[0]]->mixer_dev;
|
|
}
|
|
}
|
|
return 1;
|
|
fail:
|
|
release_region(hw_config->io_base + 4, 4);
|
|
release_region(hw_config->io_base, 4);
|
|
return 0;
|
|
}
|
|
|
|
static inline void __exit unload_pss(struct address_info *hw_config)
|
|
{
|
|
release_region(hw_config->io_base, 0x10);
|
|
release_region(hw_config->io_base+0x10, 0x9);
|
|
}
|
|
|
|
static inline void __exit unload_pss_mpu(struct address_info *hw_config)
|
|
{
|
|
unload_mpu401(hw_config);
|
|
}
|
|
|
|
static inline void __exit unload_pss_mss(struct address_info *hw_config)
|
|
{
|
|
unload_ms_sound(hw_config);
|
|
}
|
|
|
|
|
|
static struct address_info cfg;
|
|
static struct address_info cfg2;
|
|
static struct address_info cfg_mpu;
|
|
|
|
static int pss_io __initdata = -1;
|
|
static int mss_io __initdata = -1;
|
|
static int mss_irq __initdata = -1;
|
|
static int mss_dma __initdata = -1;
|
|
static int mpu_io __initdata = -1;
|
|
static int mpu_irq __initdata = -1;
|
|
static int pss_no_sound = 0; /* Just configure non-sound components */
|
|
static int pss_keep_settings = 1; /* Keep hardware settings at module exit */
|
|
static char *pss_firmware = "/etc/sound/pss_synth";
|
|
|
|
module_param(pss_io, int, 0);
|
|
MODULE_PARM_DESC(pss_io, "Set i/o base of PSS card (probably 0x220 or 0x240)");
|
|
module_param(mss_io, int, 0);
|
|
MODULE_PARM_DESC(mss_io, "Set WSS (audio) i/o base (0x530, 0x604, 0xE80, 0xF40, or other. Address must end in 0 or 4 and must be from 0x100 to 0xFF4)");
|
|
module_param(mss_irq, int, 0);
|
|
MODULE_PARM_DESC(mss_irq, "Set WSS (audio) IRQ (3, 5, 7, 9, 10, 11, 12)");
|
|
module_param(mss_dma, int, 0);
|
|
MODULE_PARM_DESC(mss_dma, "Set WSS (audio) DMA (0, 1, 3)");
|
|
module_param(mpu_io, int, 0);
|
|
MODULE_PARM_DESC(mpu_io, "Set MIDI i/o base (0x330 or other. Address must be on 4 location boundaries and must be from 0x100 to 0xFFC)");
|
|
module_param(mpu_irq, int, 0);
|
|
MODULE_PARM_DESC(mpu_irq, "Set MIDI IRQ (3, 5, 7, 9, 10, 11, 12)");
|
|
module_param(pss_cdrom_port, int, 0);
|
|
MODULE_PARM_DESC(pss_cdrom_port, "Set the PSS CDROM port i/o base (0x340 or other)");
|
|
module_param(pss_enable_joystick, bool, 0);
|
|
MODULE_PARM_DESC(pss_enable_joystick, "Enables the PSS joystick port (1 to enable, 0 to disable)");
|
|
module_param(pss_no_sound, bool, 0);
|
|
MODULE_PARM_DESC(pss_no_sound, "Configure sound compoents (0 - no, 1 - yes)");
|
|
module_param(pss_keep_settings, bool, 0);
|
|
MODULE_PARM_DESC(pss_keep_settings, "Keep hardware setting at driver unloading (0 - no, 1 - yes)");
|
|
module_param(pss_firmware, charp, 0);
|
|
MODULE_PARM_DESC(pss_firmware, "Location of the firmware file (default - /etc/sound/pss_synth)");
|
|
module_param(pss_mixer, bool, 0);
|
|
MODULE_PARM_DESC(pss_mixer, "Enable (1) or disable (0) PSS mixer (controlling of output volume, bass, treble, synth volume). The mixer is not available on all PSS cards.");
|
|
MODULE_AUTHOR("Hannu Savolainen, Vladimir Michl");
|
|
MODULE_DESCRIPTION("Module for PSS sound cards (based on AD1848, ADSP-2115 and ESC614). This module includes control of output amplifier and synth volume of the Beethoven ADSP-16 card (this may work with other PSS cards).");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
static int fw_load = 0;
|
|
static int pssmpu = 0, pssmss = 0;
|
|
|
|
/*
|
|
* Load a PSS sound card module
|
|
*/
|
|
|
|
static int __init init_pss(void)
|
|
{
|
|
|
|
if(pss_no_sound) /* If configuring only nonsound components */
|
|
{
|
|
cfg.io_base = pss_io;
|
|
if(!probe_pss(&cfg))
|
|
return -ENODEV;
|
|
printk(KERN_INFO "ECHO-PSS Rev. %d\n", inw(REG(PSS_ID)) & 0x00ff);
|
|
printk(KERN_INFO "PSS: loading in no sound mode.\n");
|
|
disable_all_emulations();
|
|
configure_nonsound_components();
|
|
release_region(pss_io, 0x10);
|
|
release_region(pss_io + 0x10, 0x9);
|
|
return 0;
|
|
}
|
|
|
|
cfg.io_base = pss_io;
|
|
|
|
cfg2.io_base = mss_io;
|
|
cfg2.irq = mss_irq;
|
|
cfg2.dma = mss_dma;
|
|
|
|
cfg_mpu.io_base = mpu_io;
|
|
cfg_mpu.irq = mpu_irq;
|
|
|
|
if (cfg.io_base == -1 || cfg2.io_base == -1 || cfg2.irq == -1 || cfg.dma == -1) {
|
|
printk(KERN_INFO "pss: mss_io, mss_dma, mss_irq and pss_io must be set.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pss_synth) {
|
|
fw_load = 1;
|
|
pss_synthLen = mod_firmware_load(pss_firmware, (void *) &pss_synth);
|
|
}
|
|
if (!attach_pss(&cfg))
|
|
return -ENODEV;
|
|
/*
|
|
* Attach stuff
|
|
*/
|
|
if (probe_pss_mpu(&cfg_mpu))
|
|
pssmpu = 1;
|
|
|
|
if (probe_pss_mss(&cfg2))
|
|
pssmss = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit cleanup_pss(void)
|
|
{
|
|
if(!pss_no_sound)
|
|
{
|
|
if(fw_load && pss_synth)
|
|
vfree(pss_synth);
|
|
if(pssmss)
|
|
unload_pss_mss(&cfg2);
|
|
if(pssmpu)
|
|
unload_pss_mpu(&cfg_mpu);
|
|
unload_pss(&cfg);
|
|
}
|
|
|
|
if(!pss_keep_settings) /* Keep hardware settings if asked */
|
|
{
|
|
disable_all_emulations();
|
|
printk(KERN_INFO "Resetting PSS sound card configurations.\n");
|
|
}
|
|
}
|
|
|
|
module_init(init_pss);
|
|
module_exit(cleanup_pss);
|
|
|
|
#ifndef MODULE
|
|
static int __init setup_pss(char *str)
|
|
{
|
|
/* io, mss_io, mss_irq, mss_dma, mpu_io, mpu_irq */
|
|
int ints[7];
|
|
|
|
str = get_options(str, ARRAY_SIZE(ints), ints);
|
|
|
|
pss_io = ints[1];
|
|
mss_io = ints[2];
|
|
mss_irq = ints[3];
|
|
mss_dma = ints[4];
|
|
mpu_io = ints[5];
|
|
mpu_irq = ints[6];
|
|
|
|
return 1;
|
|
}
|
|
|
|
__setup("pss=", setup_pss);
|
|
#endif
|