2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
linux-next/arch/arm
Catalin Marinas 90303b1023 [ARM] 3256/1: Make the function-returning ldm's use sp as the base register
Patch from Catalin Marinas

If the low interrupt latency mode is enabled for the CPU (from ARMv6
onwards), the ldm/stm instructions are no longer atomic. An ldm instruction
restoring the sp and pc registers can be interrupted immediately after sp
was updated but before the pc. If this happens, the CPU restores the base
register to the value before the ldm instruction but if the base register
is not sp, the interrupt routine will corrupt the stack and the restarted
ldm instruction will load garbage.

Note that future ARM cores might always run in the low interrupt latency
mode.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-12 16:53:51 +00:00
..
boot [ARM] 3240/2: AT91RM9200 support for 2.6 (Core) 2006-01-09 17:05:41 +00:00
common [PATCH] fix more missing includes 2006-01-08 20:13:45 -08:00
configs [ARM] 3247/1: AT91RM9200 support for 2.6 (Cogent CSB337 & CSB637 boards) (Patch 2006-01-10 16:59:29 +00:00
kernel [ARM] 3256/1: Make the function-returning ldm's use sp as the base register 2006-01-12 16:53:51 +00:00
lib [ARM] 3256/1: Make the function-returning ldm's use sp as the base register 2006-01-12 16:53:51 +00:00
mach-aaec2000 [ARM] Move asm/hardware/clock.h to linux/clk.h 2006-01-07 16:15:52 +00:00
mach-at91rm9200 [ARM] 3247/1: AT91RM9200 support for 2.6 (Cogent CSB337 & CSB637 boards) (Patch 2006-01-10 16:59:29 +00:00
mach-clps711x [ARM] Remove unused dma.c files 2006-01-04 14:06:31 +00:00
mach-clps7500 [ARM] Shut up gcc warning in clps7500 core.c 2005-11-21 17:03:15 +00:00
mach-ebsa110 [ARM] Convert EBSA110 network driver to a platform driver 2005-10-31 17:14:57 +00:00
mach-footbridge [PATCH] ARM: Netwinder ds1620 driver needs an export to be built as module 2006-01-08 20:13:39 -08:00
mach-h720x Create platform_device.h to contain all the platform device details. 2005-10-29 19:07:23 +01:00
mach-imx [ARM] 3231/1: mx1ads board support cleanup 2006-01-05 20:44:58 +00:00
mach-integrator [PATCH] move rtc_interrupt() prototype to rtc.h 2006-01-08 20:13:47 -08:00
mach-iop3xx [ARM] 3217/1: iop331 uarts as platform devices 2006-01-05 20:53:02 +00:00
mach-ixp4xx [ARM] 3226/1: IXP4xx runtime expansion bus window size configuration 2006-01-05 20:59:29 +00:00
mach-ixp2000 [ARM] 3121/1: unconditionally use XCB=101 on ixp2000 2005-11-07 21:12:09 +00:00
mach-l7200 [ARM] 2980/1: Fix L7200 core.c compile 2005-10-14 12:49:15 +01:00
mach-lh7a40x Create platform_device.h to contain all the platform device details. 2005-10-29 19:07:23 +01:00
mach-omap1 spelling: s/trough/through/ 2006-01-10 00:13:33 +01:00
mach-omap2 [ARM] Move asm/hardware/clock.h to linux/clk.h 2006-01-07 16:15:52 +00:00
mach-pxa [PATCH] IRQ type flags 2006-01-08 20:13:46 -08:00
mach-realview [PATCH] fix more missing includes 2006-01-08 20:13:45 -08:00
mach-rpc [ARM] Remove '__address' from scatterlist and convert to DMA API 2006-01-04 15:08:30 +00:00
mach-s3c2410 [ARM] 3246/1: S3C24XX - retab clock list in arch/arm/mach-s3c2410/clock.c 2006-01-09 21:16:18 +00:00
mach-sa1100 [ARM] Remove SA1100 PM prepare/finish ops 2006-01-04 15:55:41 +00:00
mach-shark [ARM] 2991/1: Replace map_desc.physical with map_desc.pfn: Shark 2005-10-28 15:19:03 +01:00
mach-versatile [ARM] Move asm/hardware/clock.h to linux/clk.h 2006-01-07 16:15:52 +00:00
mm [ARM] 3209/1: Configurable DMA-consistent memory region 2006-01-12 16:12:21 +00:00
nwfpe [ARM] 3118/1: fix and reenable nwfpe extended precision emulation for big-endian 2005-11-07 21:12:08 +00:00
oprofile [PATCH] mm: kill check_user_page_readable 2005-10-29 21:40:41 -07:00
plat-omap [ARM] Move asm/hardware/clock.h to linux/clk.h 2006-01-07 16:15:52 +00:00
tools [ARM] Update mach-types 2006-01-09 12:57:05 +00:00
vfp kbuild: arm - use generic asm-offsets.h support 2005-09-09 21:08:59 +02:00
Kconfig Merge Linus' tree. 2006-01-09 19:18:33 +00:00
Kconfig.debug [ARM] Fix typo in arch/arm/Kconfig.debug 2005-09-09 15:57:17 +01:00
Makefile [ARM] 3240/2: AT91RM9200 support for 2.6 (Core) 2006-01-09 17:05:41 +00:00