renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 16:53:54 +08:00
Code
9011cd250e
linux-next/drivers/net/wireless/zd1211rw/zd_mac.h
Jussi Kivilinna a0fd751f09 zd1211rw: add TX watchdog and device resetting 
When doing transfers at high speed for long time, tx queue can freeze. So add
tx watchdog. TX-watchdog checks for locked tx-urbs and reset hardware when
such is detected. Merely unlinking urb was not enough, device have to be
reseted. Hw settings are restored so that any open link will stay on after
reset.

Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-04 16:29:51 -05:00

328 lines
9.1 KiB
C
Raw Blame History

/* ZD1211 USB-WLAN driver for Linux
*
* Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
* Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _ZD_MAC_H
#define _ZD_MAC_H
#include <linux/kernel.h>
#include <net/mac80211.h>
#include "zd_chip.h"
struct zd_ctrlset {
u8 modulation;
__le16 tx_length;
u8 control;
/* stores only the difference to tx_length on ZD1211B */
__le16 packet_length;
__le16 current_length;
u8 service;
__le16 next_frame_length;
} __packed;
#define ZD_CS_RESERVED_SIZE 25
/* The field modulation of struct zd_ctrlset controls the bit rate, the use
* of short or long preambles in 802.11b (CCK mode) or the use of 802.11a or
* 802.11g in OFDM mode.
*
* The term zd-rate is used for the combination of the modulation type flag
* and the "pure" rate value.
*/
#define ZD_PURE_RATE_MASK 0x0f
#define ZD_MODULATION_TYPE_MASK 0x10
#define ZD_RATE_MASK (ZD_PURE_RATE_MASK|ZD_MODULATION_TYPE_MASK)
#define ZD_PURE_RATE(modulation) ((modulation) & ZD_PURE_RATE_MASK)
#define ZD_MODULATION_TYPE(modulation) ((modulation) & ZD_MODULATION_TYPE_MASK)
#define ZD_RATE(modulation) ((modulation) & ZD_RATE_MASK)
/* The two possible modulation types. Notify that 802.11b doesn't use the CCK
* codeing for the 1 and 2 MBit/s rate. We stay with the term here to remain
* consistent with uses the term at other places.
*/
#define ZD_CCK 0x00
#define ZD_OFDM 0x10
/* The ZD1211 firmware uses proprietary encodings of the 802.11b (CCK) rates.
* For OFDM the PLCP rate encodings are used. We combine these "pure" rates
* with the modulation type flag and call the resulting values zd-rates.
*/
#define ZD_CCK_RATE_1M (ZD_CCK|0x00)
#define ZD_CCK_RATE_2M (ZD_CCK|0x01)
#define ZD_CCK_RATE_5_5M (ZD_CCK|0x02)
#define ZD_CCK_RATE_11M (ZD_CCK|0x03)
#define ZD_OFDM_RATE_6M (ZD_OFDM|ZD_OFDM_PLCP_RATE_6M)
#define ZD_OFDM_RATE_9M (ZD_OFDM|ZD_OFDM_PLCP_RATE_9M)
#define ZD_OFDM_RATE_12M (ZD_OFDM|ZD_OFDM_PLCP_RATE_12M)
#define ZD_OFDM_RATE_18M (ZD_OFDM|ZD_OFDM_PLCP_RATE_18M)
#define ZD_OFDM_RATE_24M (ZD_OFDM|ZD_OFDM_PLCP_RATE_24M)
#define ZD_OFDM_RATE_36M (ZD_OFDM|ZD_OFDM_PLCP_RATE_36M)
#define ZD_OFDM_RATE_48M (ZD_OFDM|ZD_OFDM_PLCP_RATE_48M)
#define ZD_OFDM_RATE_54M (ZD_OFDM|ZD_OFDM_PLCP_RATE_54M)
/* The bit 5 of the zd_ctrlset modulation field controls the preamble in CCK
* mode or the 802.11a/802.11g selection in OFDM mode.
*/
#define ZD_CCK_PREA_LONG 0x00
#define ZD_CCK_PREA_SHORT 0x20
#define ZD_OFDM_MODE_11G 0x00
#define ZD_OFDM_MODE_11A 0x20
/* zd_ctrlset control field */
#define ZD_CS_NEED_RANDOM_BACKOFF 0x01
#define ZD_CS_NO_ACK 0x02
#define ZD_CS_FRAME_TYPE_MASK 0x0c
#define ZD_CS_DATA_FRAME 0x00
#define ZD_CS_PS_POLL_FRAME 0x04
#define ZD_CS_MANAGEMENT_FRAME 0x08
#define ZD_CS_NO_SEQUENCE_CTL_FRAME 0x0c
#define ZD_CS_WAKE_DESTINATION 0x10
#define ZD_CS_RTS 0x20
#define ZD_CS_ENCRYPT 0x40
#define ZD_CS_SELF_CTS 0x80
/* Incoming frames are prepended by a PLCP header */
#define ZD_PLCP_HEADER_SIZE 5
struct rx_length_info {
__le16 length[3];
__le16 tag;
} __packed;
#define RX_LENGTH_INFO_TAG 0x697e
struct rx_status {
u8 signal_quality_cck;
/* rssi */
u8 signal_strength;
u8 signal_quality_ofdm;
u8 decryption_type;
u8 frame_status;
} __packed;
/* rx_status field decryption_type */
#define ZD_RX_NO_WEP 0
#define ZD_RX_WEP64 1
#define ZD_RX_TKIP 2
#define ZD_RX_AES 4
#define ZD_RX_WEP128 5
#define ZD_RX_WEP256 6
/* rx_status field frame_status */
#define ZD_RX_FRAME_MODULATION_MASK 0x01
#define ZD_RX_CCK 0x00
#define ZD_RX_OFDM 0x01
#define ZD_RX_TIMEOUT_ERROR 0x02
#define ZD_RX_FIFO_OVERRUN_ERROR 0x04
#define ZD_RX_DECRYPTION_ERROR 0x08
#define ZD_RX_CRC32_ERROR 0x10
#define ZD_RX_NO_ADDR1_MATCH_ERROR 0x20
#define ZD_RX_CRC16_ERROR 0x40
#define ZD_RX_ERROR 0x80
struct tx_retry_rate {
int count; /* number of valid element in rate[] array */
int rate[10]; /* retry rates, described by an index in zd_rates[] */
};
struct tx_status {
u8 type; /* must always be 0x01 : USB_INT_TYPE */
u8 id; /* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */
u8 rate;
u8 pad;
u8 mac[ETH_ALEN];
u8 retry;
u8 failure;
} __packed;
enum mac_flags {
MAC_FIXED_CHANNEL = 0x01,
};
struct housekeeping {
struct delayed_work link_led_work;
};
struct beacon {
struct delayed_work watchdog_work;
unsigned long last_update;
u16 interval;
u8 period;
};
enum zd_device_flags {
ZD_DEVICE_RUNNING,
};
#define ZD_MAC_STATS_BUFFER_SIZE 16
#define ZD_MAC_MAX_ACK_WAITERS 50
struct zd_mac {
struct zd_chip chip;
spinlock_t lock;
spinlock_t intr_lock;
struct ieee80211_hw *hw;
struct ieee80211_vif *vif;
struct housekeeping housekeeping;
struct beacon beacon;
struct work_struct set_rts_cts_work;
struct work_struct process_intr;
struct zd_mc_hash multicast_hash;
u8 intr_buffer[USB_MAX_EP_INT_BUFFER];
u8 regdomain;
u8 default_regdomain;
u8 channel;
int type;
int associated;
unsigned long flags;
struct sk_buff_head ack_wait_queue;
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
struct ieee80211_supported_band band;
/* Short preamble (used for RTS/CTS) */
unsigned int short_preamble:1;
/* whether to pass frames with CRC errors to stack */
unsigned int pass_failed_fcs:1;
/* whether to pass control frames to stack */
unsigned int pass_ctrl:1;
/* whether we have received a 802.11 ACK that is pending */
unsigned int ack_pending:1;
/* signal strength of the last 802.11 ACK received */
int ack_signal;
};
#define ZD_REGDOMAIN_FCC 0x10
#define ZD_REGDOMAIN_IC 0x20
#define ZD_REGDOMAIN_ETSI 0x30
#define ZD_REGDOMAIN_SPAIN 0x31
#define ZD_REGDOMAIN_FRANCE 0x32
#define ZD_REGDOMAIN_JAPAN_2 0x40
#define ZD_REGDOMAIN_JAPAN 0x41
#define ZD_REGDOMAIN_JAPAN_3 0x49
enum {
MIN_CHANNEL24 = 1,
MAX_CHANNEL24 = 14,
};
#define ZD_PLCP_SERVICE_LENGTH_EXTENSION 0x80
struct ofdm_plcp_header {
u8 prefix[3];
__le16 service;
} __packed;
static inline u8 zd_ofdm_plcp_header_rate(const struct ofdm_plcp_header *header)
{
return header->prefix[0] & 0xf;
}
/* The following defines give the encoding of the 4-bit rate field in the
* OFDM (802.11a/802.11g) PLCP header. Notify that these values are used to
* define the zd-rate values for OFDM.
*
* See the struct zd_ctrlset definition in zd_mac.h.
*/
#define ZD_OFDM_PLCP_RATE_6M 0xb
#define ZD_OFDM_PLCP_RATE_9M 0xf
#define ZD_OFDM_PLCP_RATE_12M 0xa
#define ZD_OFDM_PLCP_RATE_18M 0xe
#define ZD_OFDM_PLCP_RATE_24M 0x9
#define ZD_OFDM_PLCP_RATE_36M 0xd
#define ZD_OFDM_PLCP_RATE_48M 0x8
#define ZD_OFDM_PLCP_RATE_54M 0xc
struct cck_plcp_header {
u8 signal;
u8 service;
__le16 length;
__le16 crc16;
} __packed;
static inline u8 zd_cck_plcp_header_signal(const struct cck_plcp_header *header)
{
return header->signal;
}
/* These defines give the encodings of the signal field in the 802.11b PLCP
* header. The signal field gives the bit rate of the following packet. Even
* if technically wrong we use CCK here also for the 1 MBit/s and 2 MBit/s
* rate to stay consistent with Zydas and our use of the term.
*
* Notify that these values are *not* used in the zd-rates.
*/
#define ZD_CCK_PLCP_SIGNAL_1M 0x0a
#define ZD_CCK_PLCP_SIGNAL_2M 0x14
#define ZD_CCK_PLCP_SIGNAL_5M5 0x37
#define ZD_CCK_PLCP_SIGNAL_11M 0x6e
static inline struct zd_mac *zd_hw_mac(struct ieee80211_hw *hw)
{
return hw->priv;
}
static inline struct zd_mac *zd_chip_to_mac(struct zd_chip *chip)
{
return container_of(chip, struct zd_mac, chip);
}
static inline struct zd_mac *zd_usb_to_mac(struct zd_usb *usb)
{
return zd_chip_to_mac(zd_usb_to_chip(usb));
}
static inline u8 *zd_mac_get_perm_addr(struct zd_mac *mac)
{
return mac->hw->wiphy->perm_addr;
}
#define zd_mac_dev(mac) (zd_chip_dev(&(mac)->chip))
struct ieee80211_hw *zd_mac_alloc_hw(struct usb_interface *intf);
void zd_mac_clear(struct zd_mac *mac);
int zd_mac_preinit_hw(struct ieee80211_hw *hw);
int zd_mac_init_hw(struct ieee80211_hw *hw);
int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
void zd_mac_tx_failed(struct urb *urb);
void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
int zd_op_start(struct ieee80211_hw *hw);
void zd_op_stop(struct ieee80211_hw *hw);
int zd_restore_settings(struct zd_mac *mac);
#ifdef DEBUG
void zd_dump_rx_status(const struct rx_status *status);
#else
#define zd_dump_rx_status(status)
#endif /* DEBUG */
#endif /* _ZD_MAC_H */
View Git Blame Copy Permalink