2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/drivers/spi/spi-clps711x.c
Linus Walleij 054320b255
spi: clps711x: Convert to use CS GPIO descriptors
This converts the CLPS711x SPI master driver to use GPIO
descriptors for chip select handling.

The CLPS711x driver was merely requesting the GPIO and
setting the CS line non-asserted so this was a pretty
straight-forward conversion. The setup callback goes away.

Cc: Alexander Shiyan <shc_work@mail.ru>
Cc: Linuxarm <linuxarm@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-09 12:41:58 +00:00

179 lines
4.3 KiB
C

/*
* CLPS711X SPI bus driver
*
* Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/clps711x.h>
#include <linux/spi/spi.h>
#define DRIVER_NAME "clps711x-spi"
#define SYNCIO_FRMLEN(x) ((x) << 8)
#define SYNCIO_TXFRMEN (1 << 14)
struct spi_clps711x_data {
void __iomem *syncio;
struct regmap *syscon;
struct clk *spi_clk;
u8 *tx_buf;
u8 *rx_buf;
unsigned int bpw;
int len;
};
static int spi_clps711x_prepare_message(struct spi_master *master,
struct spi_message *msg)
{
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
struct spi_device *spi = msg->spi;
/* Setup mode for transfer */
return regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCKNSEN,
(spi->mode & SPI_CPHA) ?
SYSCON3_ADCCKNSEN : 0);
}
static int spi_clps711x_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
u8 data;
clk_set_rate(hw->spi_clk, xfer->speed_hz ? : spi->max_speed_hz);
hw->len = xfer->len;
hw->bpw = xfer->bits_per_word;
hw->tx_buf = (u8 *)xfer->tx_buf;
hw->rx_buf = (u8 *)xfer->rx_buf;
/* Initiate transfer */
data = hw->tx_buf ? *hw->tx_buf++ : 0;
writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN, hw->syncio);
return 1;
}
static irqreturn_t spi_clps711x_isr(int irq, void *dev_id)
{
struct spi_master *master = dev_id;
struct spi_clps711x_data *hw = spi_master_get_devdata(master);
u8 data;
/* Handle RX */
data = readb(hw->syncio);
if (hw->rx_buf)
*hw->rx_buf++ = data;
/* Handle TX */
if (--hw->len > 0) {
data = hw->tx_buf ? *hw->tx_buf++ : 0;
writel(data | SYNCIO_FRMLEN(hw->bpw) | SYNCIO_TXFRMEN,
hw->syncio);
} else
spi_finalize_current_transfer(master);
return IRQ_HANDLED;
}
static int spi_clps711x_probe(struct platform_device *pdev)
{
struct spi_clps711x_data *hw;
struct spi_master *master;
struct resource *res;
int irq, ret;
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
master = spi_alloc_master(&pdev->dev, sizeof(*hw));
if (!master)
return -ENOMEM;
master->use_gpio_descriptors = true;
master->bus_num = -1;
master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 8);
master->dev.of_node = pdev->dev.of_node;
master->prepare_message = spi_clps711x_prepare_message;
master->transfer_one = spi_clps711x_transfer_one;
hw = spi_master_get_devdata(master);
hw->spi_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(hw->spi_clk)) {
ret = PTR_ERR(hw->spi_clk);
goto err_out;
}
hw->syscon =
syscon_regmap_lookup_by_compatible("cirrus,ep7209-syscon3");
if (IS_ERR(hw->syscon)) {
ret = PTR_ERR(hw->syscon);
goto err_out;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hw->syncio = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hw->syncio)) {
ret = PTR_ERR(hw->syncio);
goto err_out;
}
/* Disable extended mode due hardware problems */
regmap_update_bits(hw->syscon, SYSCON_OFFSET, SYSCON3_ADCCON, 0);
/* Clear possible pending interrupt */
readl(hw->syncio);
ret = devm_request_irq(&pdev->dev, irq, spi_clps711x_isr, 0,
dev_name(&pdev->dev), master);
if (ret)
goto err_out;
ret = devm_spi_register_master(&pdev->dev, master);
if (!ret)
return 0;
err_out:
spi_master_put(master);
return ret;
}
static const struct of_device_id clps711x_spi_dt_ids[] = {
{ .compatible = "cirrus,ep7209-spi", },
{ }
};
MODULE_DEVICE_TABLE(of, clps711x_spi_dt_ids);
static struct platform_driver clps711x_spi_driver = {
.driver = {
.name = DRIVER_NAME,
.of_match_table = clps711x_spi_dt_ids,
},
.probe = spi_clps711x_probe,
};
module_platform_driver(clps711x_spi_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
MODULE_DESCRIPTION("CLPS711X SPI bus driver");
MODULE_ALIAS("platform:" DRIVER_NAME);