2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
linux-next/tools/perf/Documentation/perf-stat.txt
Jiri Olsa 89af4e05c2 perf stat report: Allow to override aggr_mode
Allowing to override record aggr_mode. It's possible to use perf stat
like:

   $ perf stat report -A
   $ perf stat report --per-core
   $ perf stat report --per-socket

To customize the recorded aggregate mode regardless what was used during
the stat record command.

Reported-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1446734469-11352-19-git-send-email-jolsa@kernel.org
[ Renamed 'stat' parameter to 'st' to fix 'already defined' build error with older distros (e.g. RHEL6.7) ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-17 16:30:30 -03:00

217 lines
6.2 KiB
Plaintext

perf-stat(1)
============
NAME
----
perf-stat - Run a command and gather performance counter statistics
SYNOPSIS
--------
[verse]
'perf stat' [-e <EVENT> | --event=EVENT] [-a] <command>
'perf stat' [-e <EVENT> | --event=EVENT] [-a] -- <command> [<options>]
'perf stat' [-e <EVENT> | --event=EVENT] [-a] record [-o file] -- <command> [<options>]
'perf stat' report [-i file]
DESCRIPTION
-----------
This command runs a command and gathers performance counter statistics
from it.
OPTIONS
-------
<command>...::
Any command you can specify in a shell.
record::
See STAT RECORD.
report::
See STAT REPORT.
-e::
--event=::
Select the PMU event. Selection can be:
- a symbolic event name (use 'perf list' to list all events)
- a raw PMU event (eventsel+umask) in the form of rNNN where NNN is a
hexadecimal event descriptor.
- a symbolically formed event like 'pmu/param1=0x3,param2/' where
param1 and param2 are defined as formats for the PMU in
/sys/bus/event_sources/devices/<pmu>/format/*
- a symbolically formed event like 'pmu/config=M,config1=N,config2=K/'
where M, N, K are numbers (in decimal, hex, octal format).
Acceptable values for each of 'config', 'config1' and 'config2'
parameters are defined by corresponding entries in
/sys/bus/event_sources/devices/<pmu>/format/*
-i::
--no-inherit::
child tasks do not inherit counters
-p::
--pid=<pid>::
stat events on existing process id (comma separated list)
-t::
--tid=<tid>::
stat events on existing thread id (comma separated list)
-a::
--all-cpus::
system-wide collection from all CPUs
-c::
--scale::
scale/normalize counter values
-r::
--repeat=<n>::
repeat command and print average + stddev (max: 100). 0 means forever.
-B::
--big-num::
print large numbers with thousands' separators according to locale
-C::
--cpu=::
Count only on the list of CPUs provided. Multiple CPUs can be provided as a
comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2.
In per-thread mode, this option is ignored. The -a option is still necessary
to activate system-wide monitoring. Default is to count on all CPUs.
-A::
--no-aggr::
Do not aggregate counts across all monitored CPUs in system-wide mode (-a).
This option is only valid in system-wide mode.
-n::
--null::
null run - don't start any counters
-v::
--verbose::
be more verbose (show counter open errors, etc)
-x SEP::
--field-separator SEP::
print counts using a CSV-style output to make it easy to import directly into
spreadsheets. Columns are separated by the string specified in SEP.
-G name::
--cgroup name::
monitor only in the container (cgroup) called "name". This option is available only
in per-cpu mode. The cgroup filesystem must be mounted. All threads belonging to
container "name" are monitored when they run on the monitored CPUs. Multiple cgroups
can be provided. Each cgroup is applied to the corresponding event, i.e., first cgroup
to first event, second cgroup to second event and so on. It is possible to provide
an empty cgroup (monitor all the time) using, e.g., -G foo,,bar. Cgroups must have
corresponding events, i.e., they always refer to events defined earlier on the command
line.
-o file::
--output file::
Print the output into the designated file.
--append::
Append to the output file designated with the -o option. Ignored if -o is not specified.
--log-fd::
Log output to fd, instead of stderr. Complementary to --output, and mutually exclusive
with it. --append may be used here. Examples:
3>results perf stat --log-fd 3 -- $cmd
3>>results perf stat --log-fd 3 --append -- $cmd
--pre::
--post::
Pre and post measurement hooks, e.g.:
perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' -- make -s -j64 O=defconfig-build/ bzImage
-I msecs::
--interval-print msecs::
Print count deltas every N milliseconds (minimum: 10ms)
The overhead percentage could be high in some cases, for instance with small, sub 100ms intervals. Use with caution.
example: 'perf stat -I 1000 -e cycles -a sleep 5'
--per-socket::
Aggregate counts per processor socket for system-wide mode measurements. This
is a useful mode to detect imbalance between sockets. To enable this mode,
use --per-socket in addition to -a. (system-wide). The output includes the
socket number and the number of online processors on that socket. This is
useful to gauge the amount of aggregation.
--per-core::
Aggregate counts per physical processor for system-wide mode measurements. This
is a useful mode to detect imbalance between physical cores. To enable this mode,
use --per-core in addition to -a. (system-wide). The output includes the
core number and the number of online logical processors on that physical processor.
--per-thread::
Aggregate counts per monitored threads, when monitoring threads (-t option)
or processes (-p option).
-D msecs::
--delay msecs::
After starting the program, wait msecs before measuring. This is useful to
filter out the startup phase of the program, which is often very different.
-T::
--transaction::
Print statistics of transactional execution if supported.
STAT RECORD
-----------
Stores stat data into perf data file.
-o file::
--output file::
Output file name.
STAT REPORT
-----------
Reads and reports stat data from perf data file.
-i file::
--input file::
Input file name.
--per-socket::
Aggregate counts per processor socket for system-wide mode measurements.
--per-core::
Aggregate counts per physical processor for system-wide mode measurements.
-A::
--no-aggr::
Do not aggregate counts across all monitored CPUs.
EXAMPLES
--------
$ perf stat -- make -j
Performance counter stats for 'make -j':
8117.370256 task clock ticks # 11.281 CPU utilization factor
678 context switches # 0.000 M/sec
133 CPU migrations # 0.000 M/sec
235724 pagefaults # 0.029 M/sec
24821162526 CPU cycles # 3057.784 M/sec
18687303457 instructions # 2302.138 M/sec
172158895 cache references # 21.209 M/sec
27075259 cache misses # 3.335 M/sec
Wall-clock time elapsed: 719.554352 msecs
SEE ALSO
--------
linkperf:perf-top[1], linkperf:perf-list[1]