renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-11-18 23:54:26 +08:00
Code
8d610dd52d
linux-next/init/Kconfig
Andrew Morton 7c3ab7381e [PATCH] io-accounting: core statistics 
The present per-task IO accounting isn't very useful.  It simply counts the
number of bytes passed into read() and write().  So if a process reads 1MB
from an already-cached file, it is accused of having performed 1MB of I/O,
which is wrong.

(David Wright had some comments on the applicability of the present logical IO accounting:

  For billing purposes it is useless but for workload analysis it is very
  useful

  read_bytes/read_calls  average read request size
  write_bytes/write_calls average write request size

  read_bytes/read_blocks ie logical/physical can indicate hit rate or thrashing
  write_bytes/write_blocks  ie logical/physical  guess since pdflush writes can
                                                be missed

  I often look for logical larger than physical to see filesystem cache
  problems.  And the bytes/cpusec can help find applications that are
  dominating the cache and causing slow interactive response from page cache
  contention.

  I want to find the IO intensive applications and make sure they are doing
  efficient IO.  Thus the acctcms(sysV) or csacms command would give the high
  IO commands).

This patchset adds new accounting which tries to be more accurate.  We account
for three things:

reads:

  attempt to count the number of bytes which this process really did cause
  to be fetched from the storage layer.  Done at the submit_bio() level, so it
  is accurate for block-backed filesystems.  I also attempt to wire up NFS and
  CIFS.

writes:

  attempt to count the number of bytes which this process caused to be sent
  to the storage layer.  This is done at page-dirtying time.

  The big inaccuracy here is truncate.  If a process writes 1MB to a file
  and then deletes the file, it will in fact perform no writeout.  But it will
  have been accounted as having caused 1MB of write.

  So...

cancelled_writes:

  account the number of bytes which this process caused to not happen, by
  truncating pagecache.

  We _could_ just subtract this from the process's `write' accounting.  But
  that means that some processes would be reported to have done negative
  amounts of write IO, which is silly.

  So we just report the raw number and punt this decision up to userspace.

Now, we _could_ account for writes at the physical I/O level.  But

- This would require that we track memory-dirtying tasks at the per-page
  level (would require a new pointer in struct page).

- It would mean that IO statistics for a process are usually only available
  long after that process has exitted.  Which means that we probably cannot
  communicate this info via taskstats.

This patch:

Wire up the kernel-private data structures and the accessor functions to
manipulate them.

Cc: Jay Lan <jlan@sgi.com>
Cc: Shailabh Nagar <nagar@watson.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Chris Sturtivant <csturtiv@sgi.com>
Cc: Tony Ernst <tee@sgi.com>
Cc: Guillaume Thouvenin <guillaume.thouvenin@bull.net>
Cc: David Wright <daw@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-10 09:55:41 -08:00

575 lines
20 KiB
Plaintext
Raw Blame History

config DEFCONFIG_LIST
string
depends on !UML
option defconfig_list
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
default "arch/$ARCH/defconfig"
menu "Code maturity level options"
config EXPERIMENTAL
bool "Prompt for development and/or incomplete code/drivers"
---help---
Some of the various things that Linux supports (such as network
drivers, file systems, network protocols, etc.) can be in a state
of development where the functionality, stability, or the level of
testing is not yet high enough for general use. This is usually
known as the "alpha-test" phase among developers. If a feature is
currently in alpha-test, then the developers usually discourage
uninformed widespread use of this feature by the general public to
avoid "Why doesn't this work?" type mail messages. However, active
testing and use of these systems is welcomed. Just be aware that it
may not meet the normal level of reliability or it may fail to work
in some special cases. Detailed bug reports from people familiar
with the kernel internals are usually welcomed by the developers
(before submitting bug reports, please read the documents
<file:README>, <file:MAINTAINERS>, <file:REPORTING-BUGS>,
<file:Documentation/BUG-HUNTING>, and
<file:Documentation/oops-tracing.txt> in the kernel source).
This option will also make obsoleted drivers available. These are
drivers that have been replaced by something else, and/or are
scheduled to be removed in a future kernel release.
Unless you intend to help test and develop a feature or driver that
falls into this category, or you have a situation that requires
using these features, you should probably say N here, which will
cause the configurator to present you with fewer choices. If
you say Y here, you will be offered the choice of using features or
drivers that are currently considered to be in the alpha-test phase.
config BROKEN
bool
config BROKEN_ON_SMP
bool
depends on BROKEN || !SMP
default y
config LOCK_KERNEL
bool
depends on SMP || PREEMPT
default y
config INIT_ENV_ARG_LIMIT
int
default 32 if !UML
default 128 if UML
help
Maximum of each of the number of arguments and environment
variables passed to init from the kernel command line.
endmenu
menu "General setup"
config LOCALVERSION
string "Local version - append to kernel release"
help
Append an extra string to the end of your kernel version.
This will show up when you type uname, for example.
The string you set here will be appended after the contents of
any files with a filename matching localversion* in your
object and source tree, in that order. Your total string can
be a maximum of 64 characters.
config LOCALVERSION_AUTO
bool "Automatically append version information to the version string"
default y
help
This will try to automatically determine if the current tree is a
release tree by looking for git tags that
belong to the current top of tree revision.
A string of the format -gxxxxxxxx will be added to the localversion
if a git based tree is found. The string generated by this will be
appended after any matching localversion* files, and after the value
set in CONFIG_LOCALVERSION
Note: This requires Perl, and a git repository, but not necessarily
the git or cogito tools to be installed.
config SWAP
bool "Support for paging of anonymous memory (swap)"
depends on MMU && BLOCK
default y
help
This option allows you to choose whether you want to have support
for so called swap devices or swap files in your kernel that are
used to provide more virtual memory than the actual RAM present
in your computer. If unsure say Y.
config SYSVIPC
bool "System V IPC"
---help---
Inter Process Communication is a suite of library functions and
system calls which let processes (running programs) synchronize and
exchange information. It is generally considered to be a good thing,
and some programs won't run unless you say Y here. In particular, if
you want to run the DOS emulator dosemu under Linux (read the
DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
you'll need to say Y here.
You can find documentation about IPC with "info ipc" and also in
section 6.4 of the Linux Programmer's Guide, available from
<http://www.tldp.org/guides.html>.
config IPC_NS
bool "IPC Namespaces"
depends on SYSVIPC
default n
help
Support ipc namespaces. This allows containers, i.e. virtual
environments, to use ipc namespaces to provide different ipc
objects for different servers. If unsure, say N.
config POSIX_MQUEUE
bool "POSIX Message Queues"
depends on NET && EXPERIMENTAL
---help---
POSIX variant of message queues is a part of IPC. In POSIX message
queues every message has a priority which decides about succession
of receiving it by a process. If you want to compile and run
programs written e.g. for Solaris with use of its POSIX message
queues (functions mq_*) say Y here. To use this feature you will
also need mqueue library, available from
<http://www.mat.uni.torun.pl/~wrona/posix_ipc/>
POSIX message queues are visible as a filesystem called 'mqueue'
and can be mounted somewhere if you want to do filesystem
operations on message queues.
If unsure, say Y.
config BSD_PROCESS_ACCT
bool "BSD Process Accounting"
help
If you say Y here, a user level program will be able to instruct the
kernel (via a special system call) to write process accounting
information to a file: whenever a process exits, information about
that process will be appended to the file by the kernel. The
information includes things such as creation time, owning user,
command name, memory usage, controlling terminal etc. (the complete
list is in the struct acct in <file:include/linux/acct.h>). It is
up to the user level program to do useful things with this
information. This is generally a good idea, so say Y.
config BSD_PROCESS_ACCT_V3
bool "BSD Process Accounting version 3 file format"
depends on BSD_PROCESS_ACCT
default n
help
If you say Y here, the process accounting information is written
in a new file format that also logs the process IDs of each
process and it's parent. Note that this file format is incompatible
with previous v0/v1/v2 file formats, so you will need updated tools
for processing it. A preliminary version of these tools is available
at <http://www.physik3.uni-rostock.de/tim/kernel/utils/acct/>.
config TASKSTATS
bool "Export task/process statistics through netlink (EXPERIMENTAL)"
depends on NET
default n
help
Export selected statistics for tasks/processes through the
generic netlink interface. Unlike BSD process accounting, the
statistics are available during the lifetime of tasks/processes as
responses to commands. Like BSD accounting, they are sent to user
space on task exit.
Say N if unsure.
config TASK_DELAY_ACCT
bool "Enable per-task delay accounting (EXPERIMENTAL)"
depends on TASKSTATS
help
Collect information on time spent by a task waiting for system
resources like cpu, synchronous block I/O completion and swapping
in pages. Such statistics can help in setting a task's priorities
relative to other tasks for cpu, io, rss limits etc.
Say N if unsure.
config UTS_NS
bool "UTS Namespaces"
default n
help
Support uts namespaces. This allows containers, i.e.
vservers, to use uts namespaces to provide different
uts info for different servers. If unsure, say N.
config AUDIT
bool "Auditing support"
depends on NET
help
Enable auditing infrastructure that can be used with another
kernel subsystem, such as SELinux (which requires this for
logging of avc messages output). Does not do system-call
auditing without CONFIG_AUDITSYSCALL.
config AUDITSYSCALL
bool "Enable system-call auditing support"
depends on AUDIT && (X86 || PPC || PPC64 || S390 || IA64 || UML || SPARC64)
default y if SECURITY_SELINUX
help
Enable low-overhead system-call auditing infrastructure that
can be used independently or with another kernel subsystem,
such as SELinux. To use audit's filesystem watch feature, please
ensure that INOTIFY is configured.
config IKCONFIG
tristate "Kernel .config support"
---help---
This option enables the complete Linux kernel ".config" file
contents to be saved in the kernel. It provides documentation
of which kernel options are used in a running kernel or in an
on-disk kernel. This information can be extracted from the kernel
image file with the script scripts/extract-ikconfig and used as
input to rebuild the current kernel or to build another kernel.
It can also be extracted from a running kernel by reading
/proc/config.gz if enabled (below).
config IKCONFIG_PROC
bool "Enable access to .config through /proc/config.gz"
depends on IKCONFIG && PROC_FS
---help---
This option enables access to the kernel configuration file
through /proc/config.gz.
config CPUSETS
bool "Cpuset support"
depends on SMP
help
This option will let you create and manage CPUSETs which
allow dynamically partitioning a system into sets of CPUs and
Memory Nodes and assigning tasks to run only within those sets.
This is primarily useful on large SMP or NUMA systems.
Say N if unsure.
config SYSFS_DEPRECATED
bool "Create deprecated sysfs files"
default y
help
This option creates deprecated symlinks such as the
"device"-link, the <subsystem>:<name>-link, and the
"bus"-link. It may also add deprecated key in the
uevent environment.
None of these features or values should be used today, as
they export driver core implementation details to userspace
or export properties which can't be kept stable across kernel
releases.
If enabled, this option will also move any device structures
that belong to a class, back into the /sys/class heirachy, in
order to support older versions of udev.
If you are using a distro that was released in 2006 or later,
it should be safe to say N here.
config RELAY
bool "Kernel->user space relay support (formerly relayfs)"
help
This option enables support for relay interface support in
certain file systems (such as debugfs).
It is designed to provide an efficient mechanism for tools and
facilities to relay large amounts of data from kernel space to
user space.
If unsure, say N.
source "usr/Kconfig"
config CC_OPTIMIZE_FOR_SIZE
bool "Optimize for size (Look out for broken compilers!)"
default y
depends on ARM || H8300 || EXPERIMENTAL
help
Enabling this option will pass "-Os" instead of "-O2" to gcc
resulting in a smaller kernel.
WARNING: some versions of gcc may generate incorrect code with this
option. If problems are observed, a gcc upgrade may be needed.
If unsure, say N.
config TASK_XACCT
bool "Enable extended accounting over taskstats (EXPERIMENTAL)"
depends on TASKSTATS
help
Collect extended task accounting data and send the data
to userland for processing over the taskstats interface.
Say N if unsure.
config TASK_IO_ACCOUNTING
bool "Enable per-task storage I/O accounting (EXPERIMENTAL)"
depends on TASK_XACCT
help
Collect information on the number of bytes of storage I/O which this
task has caused.
Say N if unsure.
config SYSCTL
bool
menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)"
help
This option allows certain base kernel options and settings
to be disabled or tweaked. This is for specialized
environments which can tolerate a "non-standard" kernel.
Only use this if you really know what you are doing.
config UID16
bool "Enable 16-bit UID system calls" if EMBEDDED
depends on ARM || CRIS || FRV || H8300 || X86_32 || M68K || (S390 && !64BIT) || SUPERH || SPARC32 || (SPARC64 && SPARC32_COMPAT) || UML || (X86_64 && IA32_EMULATION)
default y
help
This enables the legacy 16-bit UID syscall wrappers.
config SYSCTL_SYSCALL
bool "Sysctl syscall support" if EMBEDDED
default y
select SYSCTL
---help---
sys_sysctl uses binary paths that have been found challenging
to properly maintain and use. The interface in /proc/sys
using paths with ascii names is now the primary path to this
information.
Almost nothing using the binary sysctl interface so if you are
trying to save some space it is probably safe to disable this,
making your kernel marginally smaller.
If unsure say Y here.
config KALLSYMS
bool "Load all symbols for debugging/kksymoops" if EMBEDDED
default y
help
Say Y here to let the kernel print out symbolic crash information and
symbolic stack backtraces. This increases the size of the kernel
somewhat, as all symbols have to be loaded into the kernel image.
config KALLSYMS_ALL
bool "Include all symbols in kallsyms"
depends on DEBUG_KERNEL && KALLSYMS
help
Normally kallsyms only contains the symbols of functions, for nicer
OOPS messages. Some debuggers can use kallsyms for other
symbols too: say Y here to include all symbols, if you need them
and you don't care about adding 300k to the size of your kernel.
Say N.
config KALLSYMS_EXTRA_PASS
bool "Do an extra kallsyms pass"
depends on KALLSYMS
help
If kallsyms is not working correctly, the build will fail with
inconsistent kallsyms data. If that occurs, log a bug report and
turn on KALLSYMS_EXTRA_PASS which should result in a stable build.
Always say N here unless you find a bug in kallsyms, which must be
reported. KALLSYMS_EXTRA_PASS is only a temporary workaround while
you wait for kallsyms to be fixed.
config HOTPLUG
bool "Support for hot-pluggable devices" if EMBEDDED
default y
help
This option is provided for the case where no hotplug or uevent
capabilities is wanted by the kernel. You should only consider
disabling this option for embedded systems that do not use modules, a
dynamic /dev tree, or dynamic device discovery. Just say Y.
config PRINTK
default y
bool "Enable support for printk" if EMBEDDED
help
This option enables normal printk support. Removing it
eliminates most of the message strings from the kernel image
and makes the kernel more or less silent. As this makes it
very difficult to diagnose system problems, saying N here is
strongly discouraged.
config BUG
bool "BUG() support" if EMBEDDED
default y
help
Disabling this option eliminates support for BUG and WARN, reducing
the size of your kernel image and potentially quietly ignoring
numerous fatal conditions. You should only consider disabling this
option for embedded systems with no facilities for reporting errors.
Just say Y.
config ELF_CORE
default y
bool "Enable ELF core dumps" if EMBEDDED
help
Enable support for generating core dumps. Disabling saves about 4k.
config BASE_FULL
default y
bool "Enable full-sized data structures for core" if EMBEDDED
help
Disabling this option reduces the size of miscellaneous core
kernel data structures. This saves memory on small machines,
but may reduce performance.
config FUTEX
bool "Enable futex support" if EMBEDDED
default y
select RT_MUTEXES
help
Disabling this option will cause the kernel to be built without
support for "fast userspace mutexes". The resulting kernel may not
run glibc-based applications correctly.
config EPOLL
bool "Enable eventpoll support" if EMBEDDED
default y
help
Disabling this option will cause the kernel to be built without
support for epoll family of system calls.
config SHMEM
bool "Use full shmem filesystem" if EMBEDDED
default y
depends on MMU
help
The shmem is an internal filesystem used to manage shared memory.
It is backed by swap and manages resource limits. It is also exported
to userspace as tmpfs if TMPFS is enabled. Disabling this
option replaces shmem and tmpfs with the much simpler ramfs code,
which may be appropriate on small systems without swap.
config SLAB
default y
bool "Use full SLAB allocator" if EMBEDDED
help
Disabling this replaces the advanced SLAB allocator and
kmalloc support with the drastically simpler SLOB allocator.
SLOB is more space efficient but does not scale well and is
more susceptible to fragmentation.
config VM_EVENT_COUNTERS
default y
bool "Enable VM event counters for /proc/vmstat" if EMBEDDED
help
VM event counters are only needed to for event counts to be
shown. They have no function for the kernel itself. This
option allows the disabling of the VM event counters.
/proc/vmstat will only show page counts.
endmenu # General setup
config RT_MUTEXES
boolean
select PLIST
config TINY_SHMEM
default !SHMEM
bool
config BASE_SMALL
int
default 0 if BASE_FULL
default 1 if !BASE_FULL
config SLOB
default !SLAB
bool
menu "Loadable module support"
config MODULES
bool "Enable loadable module support"
help
Kernel modules are small pieces of compiled code which can
be inserted in the running kernel, rather than being
permanently built into the kernel. You use the "modprobe"
tool to add (and sometimes remove) them. If you say Y here,
many parts of the kernel can be built as modules (by
answering M instead of Y where indicated): this is most
useful for infrequently used options which are not required
for booting. For more information, see the man pages for
modprobe, lsmod, modinfo, insmod and rmmod.
If you say Y here, you will need to run "make
modules_install" to put the modules under /lib/modules/
where modprobe can find them (you may need to be root to do
this).
If unsure, say Y.
config MODULE_UNLOAD
bool "Module unloading"
depends on MODULES
help
Without this option you will not be able to unload any
modules (note that some modules may not be unloadable
anyway), which makes your kernel slightly smaller and
simpler. If unsure, say Y.
config MODULE_FORCE_UNLOAD
bool "Forced module unloading"
depends on MODULE_UNLOAD && EXPERIMENTAL
help
This option allows you to force a module to unload, even if the
kernel believes it is unsafe: the kernel will remove the module
without waiting for anyone to stop using it (using the -f option to
rmmod). This is mainly for kernel developers and desperate users.
If unsure, say N.
config MODVERSIONS
bool "Module versioning support"
depends on MODULES
help
Usually, you have to use modules compiled with your kernel.
Saying Y here makes it sometimes possible to use modules
compiled for different kernels, by adding enough information
to the modules to (hopefully) spot any changes which would
make them incompatible with the kernel you are running. If
unsure, say N.
config MODULE_SRCVERSION_ALL
bool "Source checksum for all modules"
depends on MODULES
help
Modules which contain a MODULE_VERSION get an extra "srcversion"
field inserted into their modinfo section, which contains a
sum of the source files which made it. This helps maintainers
see exactly which source was used to build a module (since
others sometimes change the module source without updating
the version). With this option, such a "srcversion" field
will be created for all modules. If unsure, say N.
config KMOD
bool "Automatic kernel module loading"
depends on MODULES
help
Normally when you have selected some parts of the kernel to
be created as kernel modules, you must load them (using the
"modprobe" command) before you can use them. If you say Y
here, some parts of the kernel will be able to load modules
automatically: when a part of the kernel needs a module, it
runs modprobe with the appropriate arguments, thereby
loading the module if it is available. If unsure, say Y.
config STOP_MACHINE
bool
default y
depends on (SMP && MODULE_UNLOAD) || HOTPLUG_CPU
help
Need stop_machine() primitive.
endmenu
menu "Block layer"
source "block/Kconfig"
endmenu
View Git Blame Copy Permalink