2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
linux-next/drivers/clocksource/zevio-timer.c
Daniel Tang 77ba83bb1b clocksource: Add TI-Nspire timer support
This patch adds a clocksource/clockevent driver for the timer found on some
models in the TI-Nspire calculator series. The timer has two 16bit subtimers
within its memory mapped I/O interface but only the first can generate
interrupts. The first subtimer is used to generate clockevents but only if an
interrupt number and register is given.

The interrupt acknowledgement mechanism is a little strange because the
interrupt mask and acknowledge registers are located in another memory mapped
I/O peripheral. The address of this register is passed to the driver through
device tree bindings.

The second subtimer is used as a clocksource because it isn't capable of
generating an interrupt. This subtimer is always added.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2013-06-06 17:23:13 +02:00

216 lines
5.6 KiB
C

/*
* linux/drivers/clocksource/zevio-timer.c
*
* Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
*/
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpumask.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#define IO_CURRENT_VAL 0x00
#define IO_DIVIDER 0x04
#define IO_CONTROL 0x08
#define IO_TIMER1 0x00
#define IO_TIMER2 0x0C
#define IO_MATCH_BEGIN 0x18
#define IO_MATCH(x) (IO_MATCH_BEGIN + ((x) << 2))
#define IO_INTR_STS 0x00
#define IO_INTR_ACK 0x00
#define IO_INTR_MSK 0x04
#define CNTL_STOP_TIMER (1 << 4)
#define CNTL_RUN_TIMER (0 << 4)
#define CNTL_INC (1 << 3)
#define CNTL_DEC (0 << 3)
#define CNTL_TOZERO 0
#define CNTL_MATCH(x) ((x) + 1)
#define CNTL_FOREVER 7
/* There are 6 match registers but we only use one. */
#define TIMER_MATCH 0
#define TIMER_INTR_MSK (1 << (TIMER_MATCH))
#define TIMER_INTR_ALL 0x3F
struct zevio_timer {
void __iomem *base;
void __iomem *timer1, *timer2;
void __iomem *interrupt_regs;
struct clk *clk;
struct clock_event_device clkevt;
struct irqaction clkevt_irq;
char clocksource_name[64];
char clockevent_name[64];
};
static int zevio_timer_set_event(unsigned long delta,
struct clock_event_device *dev)
{
struct zevio_timer *timer = container_of(dev, struct zevio_timer,
clkevt);
writel(delta, timer->timer1 + IO_CURRENT_VAL);
writel(CNTL_RUN_TIMER | CNTL_DEC | CNTL_MATCH(TIMER_MATCH),
timer->timer1 + IO_CONTROL);
return 0;
}
static void zevio_timer_set_mode(enum clock_event_mode mode,
struct clock_event_device *dev)
{
struct zevio_timer *timer = container_of(dev, struct zevio_timer,
clkevt);
switch (mode) {
case CLOCK_EVT_MODE_RESUME:
case CLOCK_EVT_MODE_ONESHOT:
/* Enable timer interrupts */
writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_MSK);
writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
break;
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
/* Disable timer interrupts */
writel(0, timer->interrupt_regs + IO_INTR_MSK);
writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
/* Stop timer */
writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
break;
case CLOCK_EVT_MODE_PERIODIC:
default:
/* Unsupported */
break;
}
}
static irqreturn_t zevio_timer_interrupt(int irq, void *dev_id)
{
struct zevio_timer *timer = dev_id;
u32 intr;
intr = readl(timer->interrupt_regs + IO_INTR_ACK);
if (!(intr & TIMER_INTR_MSK))
return IRQ_NONE;
writel(TIMER_INTR_MSK, timer->interrupt_regs + IO_INTR_ACK);
writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
if (timer->clkevt.event_handler)
timer->clkevt.event_handler(&timer->clkevt);
return IRQ_HANDLED;
}
static int __init zevio_timer_add(struct device_node *node)
{
struct zevio_timer *timer;
struct resource res;
int irqnr, ret;
timer = kzalloc(sizeof(*timer), GFP_KERNEL);
if (!timer)
return -ENOMEM;
timer->base = of_iomap(node, 0);
if (!timer->base) {
ret = -EINVAL;
goto error_free;
}
timer->timer1 = timer->base + IO_TIMER1;
timer->timer2 = timer->base + IO_TIMER2;
timer->clk = of_clk_get(node, 0);
if (IS_ERR(timer->clk)) {
ret = PTR_ERR(timer->clk);
pr_err("Timer clock not found! (error %d)\n", ret);
goto error_unmap;
}
timer->interrupt_regs = of_iomap(node, 1);
irqnr = irq_of_parse_and_map(node, 0);
of_address_to_resource(node, 0, &res);
scnprintf(timer->clocksource_name, sizeof(timer->clocksource_name),
"%llx.%s_clocksource",
(unsigned long long)res.start, node->name);
scnprintf(timer->clockevent_name, sizeof(timer->clockevent_name),
"%llx.%s_clockevent",
(unsigned long long)res.start, node->name);
if (timer->interrupt_regs && irqnr) {
timer->clkevt.name = timer->clockevent_name;
timer->clkevt.set_next_event = zevio_timer_set_event;
timer->clkevt.set_mode = zevio_timer_set_mode;
timer->clkevt.rating = 200;
timer->clkevt.cpumask = cpu_all_mask;
timer->clkevt.features = CLOCK_EVT_FEAT_ONESHOT;
timer->clkevt.irq = irqnr;
writel(CNTL_STOP_TIMER, timer->timer1 + IO_CONTROL);
writel(0, timer->timer1 + IO_DIVIDER);
/* Start with timer interrupts disabled */
writel(0, timer->interrupt_regs + IO_INTR_MSK);
writel(TIMER_INTR_ALL, timer->interrupt_regs + IO_INTR_ACK);
/* Interrupt to occur when timer value matches 0 */
writel(0, timer->base + IO_MATCH(TIMER_MATCH));
timer->clkevt_irq.name = timer->clockevent_name;
timer->clkevt_irq.handler = zevio_timer_interrupt;
timer->clkevt_irq.dev_id = timer;
timer->clkevt_irq.flags = IRQF_TIMER | IRQF_IRQPOLL;
setup_irq(irqnr, &timer->clkevt_irq);
clockevents_config_and_register(&timer->clkevt,
clk_get_rate(timer->clk), 0x0001, 0xffff);
pr_info("Added %s as clockevent\n", timer->clockevent_name);
}
writel(CNTL_STOP_TIMER, timer->timer2 + IO_CONTROL);
writel(0, timer->timer2 + IO_CURRENT_VAL);
writel(0, timer->timer2 + IO_DIVIDER);
writel(CNTL_RUN_TIMER | CNTL_FOREVER | CNTL_INC,
timer->timer2 + IO_CONTROL);
clocksource_mmio_init(timer->timer2 + IO_CURRENT_VAL,
timer->clocksource_name,
clk_get_rate(timer->clk),
200, 16,
clocksource_mmio_readw_up);
pr_info("Added %s as clocksource\n", timer->clocksource_name);
return 0;
error_unmap:
iounmap(timer->base);
error_free:
kfree(timer);
return ret;
}
CLOCKSOURCE_OF_DECLARE(zevio_timer, "lsi,zevio-timer", zevio_timer_add);