mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
879a70843a
s/parmeter/parameter/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210320213301.8513-1-unixbhaskar@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
230 lines
5.6 KiB
C
230 lines
5.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* sl28cpld watchdog driver
|
|
*
|
|
* Copyright 2020 Kontron Europe GmbH
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/watchdog.h>
|
|
|
|
/*
|
|
* Watchdog timer block registers.
|
|
*/
|
|
#define WDT_CTRL 0x00
|
|
#define WDT_CTRL_EN BIT(0)
|
|
#define WDT_CTRL_LOCK BIT(2)
|
|
#define WDT_CTRL_ASSERT_SYS_RESET BIT(6)
|
|
#define WDT_CTRL_ASSERT_WDT_TIMEOUT BIT(7)
|
|
#define WDT_TIMEOUT 0x01
|
|
#define WDT_KICK 0x02
|
|
#define WDT_KICK_VALUE 0x6b
|
|
#define WDT_COUNT 0x03
|
|
|
|
#define WDT_DEFAULT_TIMEOUT 10
|
|
|
|
static bool nowayout = WATCHDOG_NOWAYOUT;
|
|
module_param(nowayout, bool, 0);
|
|
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
|
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
|
|
|
static int timeout;
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
|
|
|
|
struct sl28cpld_wdt {
|
|
struct watchdog_device wdd;
|
|
struct regmap *regmap;
|
|
u32 offset;
|
|
bool assert_wdt_timeout;
|
|
};
|
|
|
|
static int sl28cpld_wdt_ping(struct watchdog_device *wdd)
|
|
{
|
|
struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
return regmap_write(wdt->regmap, wdt->offset + WDT_KICK,
|
|
WDT_KICK_VALUE);
|
|
}
|
|
|
|
static int sl28cpld_wdt_start(struct watchdog_device *wdd)
|
|
{
|
|
struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
unsigned int val;
|
|
|
|
val = WDT_CTRL_EN | WDT_CTRL_ASSERT_SYS_RESET;
|
|
if (wdt->assert_wdt_timeout)
|
|
val |= WDT_CTRL_ASSERT_WDT_TIMEOUT;
|
|
if (nowayout)
|
|
val |= WDT_CTRL_LOCK;
|
|
|
|
return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
|
|
val, val);
|
|
}
|
|
|
|
static int sl28cpld_wdt_stop(struct watchdog_device *wdd)
|
|
{
|
|
struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
|
|
return regmap_update_bits(wdt->regmap, wdt->offset + WDT_CTRL,
|
|
WDT_CTRL_EN, 0);
|
|
}
|
|
|
|
static unsigned int sl28cpld_wdt_get_timeleft(struct watchdog_device *wdd)
|
|
{
|
|
struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(wdt->regmap, wdt->offset + WDT_COUNT, &val);
|
|
if (ret)
|
|
return 0;
|
|
|
|
return val;
|
|
}
|
|
|
|
static int sl28cpld_wdt_set_timeout(struct watchdog_device *wdd,
|
|
unsigned int timeout)
|
|
{
|
|
struct sl28cpld_wdt *wdt = watchdog_get_drvdata(wdd);
|
|
int ret;
|
|
|
|
ret = regmap_write(wdt->regmap, wdt->offset + WDT_TIMEOUT, timeout);
|
|
if (ret)
|
|
return ret;
|
|
|
|
wdd->timeout = timeout;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct watchdog_info sl28cpld_wdt_info = {
|
|
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
|
|
.identity = "sl28cpld watchdog",
|
|
};
|
|
|
|
static struct watchdog_ops sl28cpld_wdt_ops = {
|
|
.owner = THIS_MODULE,
|
|
.start = sl28cpld_wdt_start,
|
|
.stop = sl28cpld_wdt_stop,
|
|
.ping = sl28cpld_wdt_ping,
|
|
.set_timeout = sl28cpld_wdt_set_timeout,
|
|
.get_timeleft = sl28cpld_wdt_get_timeleft,
|
|
};
|
|
|
|
static int sl28cpld_wdt_probe(struct platform_device *pdev)
|
|
{
|
|
struct watchdog_device *wdd;
|
|
struct sl28cpld_wdt *wdt;
|
|
unsigned int status;
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
if (!pdev->dev.parent)
|
|
return -ENODEV;
|
|
|
|
wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
|
|
if (!wdt)
|
|
return -ENOMEM;
|
|
|
|
wdt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!wdt->regmap)
|
|
return -ENODEV;
|
|
|
|
ret = device_property_read_u32(&pdev->dev, "reg", &wdt->offset);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
wdt->assert_wdt_timeout = device_property_read_bool(&pdev->dev,
|
|
"kontron,assert-wdt-timeout-pin");
|
|
|
|
/* initialize struct watchdog_device */
|
|
wdd = &wdt->wdd;
|
|
wdd->parent = &pdev->dev;
|
|
wdd->info = &sl28cpld_wdt_info;
|
|
wdd->ops = &sl28cpld_wdt_ops;
|
|
wdd->min_timeout = 1;
|
|
wdd->max_timeout = 255;
|
|
|
|
watchdog_set_drvdata(wdd, wdt);
|
|
watchdog_stop_on_reboot(wdd);
|
|
|
|
/*
|
|
* Read the status early, in case of an error, we haven't modified the
|
|
* hardware.
|
|
*/
|
|
ret = regmap_read(wdt->regmap, wdt->offset + WDT_CTRL, &status);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Initial timeout value, may be overwritten by device tree or module
|
|
* parameter in watchdog_init_timeout().
|
|
*
|
|
* Reading a zero here means that either the hardware has a default
|
|
* value of zero (which is very unlikely and definitely a hardware
|
|
* bug) or the bootloader set it to zero. In any case, we handle
|
|
* this case gracefully and set out own timeout.
|
|
*/
|
|
ret = regmap_read(wdt->regmap, wdt->offset + WDT_TIMEOUT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val)
|
|
wdd->timeout = val;
|
|
else
|
|
wdd->timeout = WDT_DEFAULT_TIMEOUT;
|
|
|
|
watchdog_init_timeout(wdd, timeout, &pdev->dev);
|
|
sl28cpld_wdt_set_timeout(wdd, wdd->timeout);
|
|
|
|
/* if the watchdog is locked, we set nowayout */
|
|
if (status & WDT_CTRL_LOCK)
|
|
nowayout = true;
|
|
watchdog_set_nowayout(wdd, nowayout);
|
|
|
|
/*
|
|
* If watchdog is already running, keep it enabled, but make
|
|
* sure its mode is set correctly.
|
|
*/
|
|
if (status & WDT_CTRL_EN) {
|
|
sl28cpld_wdt_start(wdd);
|
|
set_bit(WDOG_HW_RUNNING, &wdd->status);
|
|
}
|
|
|
|
ret = devm_watchdog_register_device(&pdev->dev, wdd);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "failed to register watchdog device\n");
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "initial timeout %d sec%s\n",
|
|
wdd->timeout, nowayout ? ", nowayout" : "");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id sl28cpld_wdt_of_match[] = {
|
|
{ .compatible = "kontron,sl28cpld-wdt" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sl28cpld_wdt_of_match);
|
|
|
|
static struct platform_driver sl28cpld_wdt_driver = {
|
|
.probe = sl28cpld_wdt_probe,
|
|
.driver = {
|
|
.name = "sl28cpld-wdt",
|
|
.of_match_table = sl28cpld_wdt_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(sl28cpld_wdt_driver);
|
|
|
|
MODULE_DESCRIPTION("sl28cpld Watchdog Driver");
|
|
MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
|
|
MODULE_LICENSE("GPL");
|