mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
8c6bba10fb
This will keep the interrupt delivery rate reasonable. The value used here (128 us) is a recommendation from the hardware people. This code is based on the work done by Amir Levy and Michael Jamet. Signed-off-by: Michael Jamet <michael.jamet@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
131 lines
3.6 KiB
C
131 lines
3.6 KiB
C
/*
|
|
* Thunderbolt driver - NHI registers
|
|
*
|
|
* Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com>
|
|
*/
|
|
|
|
#ifndef NHI_REGS_H_
|
|
#define NHI_REGS_H_
|
|
|
|
#include <linux/types.h>
|
|
|
|
enum ring_flags {
|
|
RING_FLAG_ISOCH_ENABLE = 1 << 27, /* TX only? */
|
|
RING_FLAG_E2E_FLOW_CONTROL = 1 << 28,
|
|
RING_FLAG_PCI_NO_SNOOP = 1 << 29,
|
|
RING_FLAG_RAW = 1 << 30, /* ignore EOF/SOF mask, include checksum */
|
|
RING_FLAG_ENABLE = 1 << 31,
|
|
};
|
|
|
|
enum ring_desc_flags {
|
|
RING_DESC_ISOCH = 0x1, /* TX only? */
|
|
RING_DESC_COMPLETED = 0x2, /* set by NHI */
|
|
RING_DESC_POSTED = 0x4, /* always set this */
|
|
RING_DESC_INTERRUPT = 0x8, /* request an interrupt on completion */
|
|
};
|
|
|
|
/**
|
|
* struct ring_desc - TX/RX ring entry
|
|
*
|
|
* For TX set length/eof/sof.
|
|
* For RX length/eof/sof are set by the NHI.
|
|
*/
|
|
struct ring_desc {
|
|
u64 phys;
|
|
u32 length:12;
|
|
u32 eof:4;
|
|
u32 sof:4;
|
|
enum ring_desc_flags flags:12;
|
|
u32 time; /* write zero */
|
|
} __packed;
|
|
|
|
/* NHI registers in bar 0 */
|
|
|
|
/*
|
|
* 16 bytes per entry, one entry for every hop (REG_HOP_COUNT)
|
|
* 00: physical pointer to an array of struct ring_desc
|
|
* 08: ring tail (set by NHI)
|
|
* 10: ring head (index of first non posted descriptor)
|
|
* 12: descriptor count
|
|
*/
|
|
#define REG_TX_RING_BASE 0x00000
|
|
|
|
/*
|
|
* 16 bytes per entry, one entry for every hop (REG_HOP_COUNT)
|
|
* 00: physical pointer to an array of struct ring_desc
|
|
* 08: ring head (index of first not posted descriptor)
|
|
* 10: ring tail (set by NHI)
|
|
* 12: descriptor count
|
|
* 14: max frame sizes (anything larger than 0x100 has no effect)
|
|
*/
|
|
#define REG_RX_RING_BASE 0x08000
|
|
|
|
/*
|
|
* 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
|
|
* 00: enum_ring_flags
|
|
* 04: isoch time stamp ?? (write 0)
|
|
* ..: unknown
|
|
*/
|
|
#define REG_TX_OPTIONS_BASE 0x19800
|
|
|
|
/*
|
|
* 32 bytes per entry, one entry for every hop (REG_HOP_COUNT)
|
|
* 00: enum ring_flags
|
|
* If RING_FLAG_E2E_FLOW_CONTROL is set then bits 13-23 must be set to
|
|
* the corresponding TX hop id.
|
|
* 04: EOF/SOF mask (ignored for RING_FLAG_RAW rings)
|
|
* ..: unknown
|
|
*/
|
|
#define REG_RX_OPTIONS_BASE 0x29800
|
|
|
|
/*
|
|
* three bitfields: tx, rx, rx overflow
|
|
* Every bitfield contains one bit for every hop (REG_HOP_COUNT). Registers are
|
|
* cleared on read. New interrupts are fired only after ALL registers have been
|
|
* read (even those containing only disabled rings).
|
|
*/
|
|
#define REG_RING_NOTIFY_BASE 0x37800
|
|
#define RING_NOTIFY_REG_COUNT(nhi) ((31 + 3 * nhi->hop_count) / 32)
|
|
|
|
/*
|
|
* two bitfields: rx, tx
|
|
* Both bitfields contains one bit for every hop (REG_HOP_COUNT). To
|
|
* enable/disable interrupts set/clear the corresponding bits.
|
|
*/
|
|
#define REG_RING_INTERRUPT_BASE 0x38200
|
|
#define RING_INTERRUPT_REG_COUNT(nhi) ((31 + 2 * nhi->hop_count) / 32)
|
|
|
|
#define REG_INT_THROTTLING_RATE 0x38c00
|
|
|
|
/* Interrupt Vector Allocation */
|
|
#define REG_INT_VEC_ALLOC_BASE 0x38c40
|
|
#define REG_INT_VEC_ALLOC_BITS 4
|
|
#define REG_INT_VEC_ALLOC_MASK GENMASK(3, 0)
|
|
#define REG_INT_VEC_ALLOC_REGS (32 / REG_INT_VEC_ALLOC_BITS)
|
|
|
|
/* The last 11 bits contain the number of hops supported by the NHI port. */
|
|
#define REG_HOP_COUNT 0x39640
|
|
|
|
#define REG_DMA_MISC 0x39864
|
|
#define REG_DMA_MISC_INT_AUTO_CLEAR BIT(2)
|
|
|
|
#define REG_INMAIL_DATA 0x39900
|
|
|
|
#define REG_INMAIL_CMD 0x39904
|
|
#define REG_INMAIL_CMD_MASK GENMASK(7, 0)
|
|
#define REG_INMAIL_ERROR BIT(30)
|
|
#define REG_INMAIL_OP_REQUEST BIT(31)
|
|
|
|
#define REG_OUTMAIL_CMD 0x3990c
|
|
#define REG_OUTMAIL_CMD_OPMODE_SHIFT 8
|
|
#define REG_OUTMAIL_CMD_OPMODE_MASK GENMASK(11, 8)
|
|
|
|
#define REG_FW_STS 0x39944
|
|
#define REG_FW_STS_NVM_AUTH_DONE BIT(31)
|
|
#define REG_FW_STS_CIO_RESET_REQ BIT(30)
|
|
#define REG_FW_STS_ICM_EN_CPU BIT(2)
|
|
#define REG_FW_STS_ICM_EN_INVERT BIT(1)
|
|
#define REG_FW_STS_ICM_EN BIT(0)
|
|
|
|
#endif
|