2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/drivers/gpio/adp5588-gpio.c
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00

268 lines
5.9 KiB
C

/*
* GPIO Chip driver for Analog Devices
* ADP5588 I/O Expander and QWERTY Keypad Controller
*
* Copyright 2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/i2c/adp5588.h>
#define DRV_NAME "adp5588-gpio"
#define MAXGPIO 18
#define ADP_BANK(offs) ((offs) >> 3)
#define ADP_BIT(offs) (1u << ((offs) & 0x7))
struct adp5588_gpio {
struct i2c_client *client;
struct gpio_chip gpio_chip;
struct mutex lock; /* protect cached dir, dat_out */
unsigned gpio_start;
uint8_t dat_out[3];
uint8_t dir[3];
};
static int adp5588_gpio_read(struct i2c_client *client, u8 reg)
{
int ret = i2c_smbus_read_byte_data(client, reg);
if (ret < 0)
dev_err(&client->dev, "Read Error\n");
return ret;
}
static int adp5588_gpio_write(struct i2c_client *client, u8 reg, u8 val)
{
int ret = i2c_smbus_write_byte_data(client, reg, val);
if (ret < 0)
dev_err(&client->dev, "Write Error\n");
return ret;
}
static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off)
{
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
return !!(adp5588_gpio_read(dev->client, GPIO_DAT_STAT1 + ADP_BANK(off))
& ADP_BIT(off));
}
static void adp5588_gpio_set_value(struct gpio_chip *chip,
unsigned off, int val)
{
unsigned bank, bit;
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
bank = ADP_BANK(off);
bit = ADP_BIT(off);
mutex_lock(&dev->lock);
if (val)
dev->dat_out[bank] |= bit;
else
dev->dat_out[bank] &= ~bit;
adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
dev->dat_out[bank]);
mutex_unlock(&dev->lock);
}
static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off)
{
int ret;
unsigned bank;
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
bank = ADP_BANK(off);
mutex_lock(&dev->lock);
dev->dir[bank] &= ~ADP_BIT(off);
ret = adp5588_gpio_write(dev->client, GPIO_DIR1 + bank, dev->dir[bank]);
mutex_unlock(&dev->lock);
return ret;
}
static int adp5588_gpio_direction_output(struct gpio_chip *chip,
unsigned off, int val)
{
int ret;
unsigned bank, bit;
struct adp5588_gpio *dev =
container_of(chip, struct adp5588_gpio, gpio_chip);
bank = ADP_BANK(off);
bit = ADP_BIT(off);
mutex_lock(&dev->lock);
dev->dir[bank] |= bit;
if (val)
dev->dat_out[bank] |= bit;
else
dev->dat_out[bank] &= ~bit;
ret = adp5588_gpio_write(dev->client, GPIO_DAT_OUT1 + bank,
dev->dat_out[bank]);
ret |= adp5588_gpio_write(dev->client, GPIO_DIR1 + bank,
dev->dir[bank]);
mutex_unlock(&dev->lock);
return ret;
}
static int __devinit adp5588_gpio_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
struct adp5588_gpio *dev;
struct gpio_chip *gc;
int ret, i, revid;
if (pdata == NULL) {
dev_err(&client->dev, "missing platform data\n");
return -ENODEV;
}
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA)) {
dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
return -EIO;
}
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
dev_err(&client->dev, "failed to alloc memory\n");
return -ENOMEM;
}
dev->client = client;
gc = &dev->gpio_chip;
gc->direction_input = adp5588_gpio_direction_input;
gc->direction_output = adp5588_gpio_direction_output;
gc->get = adp5588_gpio_get_value;
gc->set = adp5588_gpio_set_value;
gc->can_sleep = 1;
gc->base = pdata->gpio_start;
gc->ngpio = MAXGPIO;
gc->label = client->name;
gc->owner = THIS_MODULE;
mutex_init(&dev->lock);
ret = adp5588_gpio_read(dev->client, DEV_ID);
if (ret < 0)
goto err;
revid = ret & ADP5588_DEVICE_ID_MASK;
for (i = 0, ret = 0; i <= ADP_BANK(MAXGPIO); i++) {
dev->dat_out[i] = adp5588_gpio_read(client, GPIO_DAT_OUT1 + i);
dev->dir[i] = adp5588_gpio_read(client, GPIO_DIR1 + i);
ret |= adp5588_gpio_write(client, KP_GPIO1 + i, 0);
ret |= adp5588_gpio_write(client, GPIO_PULL1 + i,
(pdata->pullup_dis_mask >> (8 * i)) & 0xFF);
if (ret)
goto err;
}
ret = gpiochip_add(&dev->gpio_chip);
if (ret)
goto err;
dev_info(&client->dev, "gpios %d..%d on a %s Rev. %d\n",
gc->base, gc->base + gc->ngpio - 1,
client->name, revid);
if (pdata->setup) {
ret = pdata->setup(client, gc->base, gc->ngpio, pdata->context);
if (ret < 0)
dev_warn(&client->dev, "setup failed, %d\n", ret);
}
i2c_set_clientdata(client, dev);
return 0;
err:
kfree(dev);
return ret;
}
static int __devexit adp5588_gpio_remove(struct i2c_client *client)
{
struct adp5588_gpio_platform_data *pdata = client->dev.platform_data;
struct adp5588_gpio *dev = i2c_get_clientdata(client);
int ret;
if (pdata->teardown) {
ret = pdata->teardown(client,
dev->gpio_chip.base, dev->gpio_chip.ngpio,
pdata->context);
if (ret < 0) {
dev_err(&client->dev, "teardown failed %d\n", ret);
return ret;
}
}
ret = gpiochip_remove(&dev->gpio_chip);
if (ret) {
dev_err(&client->dev, "gpiochip_remove failed %d\n", ret);
return ret;
}
kfree(dev);
return 0;
}
static const struct i2c_device_id adp5588_gpio_id[] = {
{DRV_NAME, 0},
{}
};
MODULE_DEVICE_TABLE(i2c, adp5588_gpio_id);
static struct i2c_driver adp5588_gpio_driver = {
.driver = {
.name = DRV_NAME,
},
.probe = adp5588_gpio_probe,
.remove = __devexit_p(adp5588_gpio_remove),
.id_table = adp5588_gpio_id,
};
static int __init adp5588_gpio_init(void)
{
return i2c_add_driver(&adp5588_gpio_driver);
}
module_init(adp5588_gpio_init);
static void __exit adp5588_gpio_exit(void)
{
i2c_del_driver(&adp5588_gpio_driver);
}
module_exit(adp5588_gpio_exit);
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
MODULE_DESCRIPTION("GPIO ADP5588 Driver");
MODULE_LICENSE("GPL");