2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/drivers/gpio/gpio-pmic-eic-sprd.c
Andy Shevchenko 448cf90513 gpio: Get rid of duplicate of_node assignment in the drivers
GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

While at it, remove duplicate parent device assignment where it is the case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-By: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
2021-12-17 17:39:35 +01:00

381 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Spreadtrum Communications Inc.
* Copyright (C) 2018 Linaro Ltd.
*/
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
/* EIC registers definition */
#define SPRD_PMIC_EIC_DATA 0x0
#define SPRD_PMIC_EIC_DMSK 0x4
#define SPRD_PMIC_EIC_IEV 0x14
#define SPRD_PMIC_EIC_IE 0x18
#define SPRD_PMIC_EIC_RIS 0x1c
#define SPRD_PMIC_EIC_MIS 0x20
#define SPRD_PMIC_EIC_IC 0x24
#define SPRD_PMIC_EIC_TRIG 0x28
#define SPRD_PMIC_EIC_CTRL0 0x40
/*
* The PMIC EIC controller only has one bank, and each bank now can contain
* 16 EICs.
*/
#define SPRD_PMIC_EIC_PER_BANK_NR 16
#define SPRD_PMIC_EIC_NR SPRD_PMIC_EIC_PER_BANK_NR
#define SPRD_PMIC_EIC_DATA_MASK GENMASK(15, 0)
#define SPRD_PMIC_EIC_BIT(x) ((x) & (SPRD_PMIC_EIC_PER_BANK_NR - 1))
#define SPRD_PMIC_EIC_DBNC_MASK GENMASK(11, 0)
/*
* These registers are modified under the irq bus lock and cached to avoid
* unnecessary writes in bus_sync_unlock.
*/
enum {
REG_IEV,
REG_IE,
REG_TRIG,
CACHE_NR_REGS
};
/**
* struct sprd_pmic_eic - PMIC EIC controller
* @chip: the gpio_chip structure.
* @intc: the irq_chip structure.
* @map: the regmap from the parent device.
* @offset: the EIC controller's offset address of the PMIC.
* @reg: the array to cache the EIC registers.
* @buslock: for bus lock/sync and unlock.
* @irq: the interrupt number of the PMIC EIC conteroller.
*/
struct sprd_pmic_eic {
struct gpio_chip chip;
struct irq_chip intc;
struct regmap *map;
u32 offset;
u8 reg[CACHE_NR_REGS];
struct mutex buslock;
int irq;
};
static void sprd_pmic_eic_update(struct gpio_chip *chip, unsigned int offset,
u16 reg, unsigned int val)
{
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 shift = SPRD_PMIC_EIC_BIT(offset);
regmap_update_bits(pmic_eic->map, pmic_eic->offset + reg,
BIT(shift), val << shift);
}
static int sprd_pmic_eic_read(struct gpio_chip *chip, unsigned int offset,
u16 reg)
{
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 value;
int ret;
ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
if (ret)
return ret;
return !!(value & BIT(SPRD_PMIC_EIC_BIT(offset)));
}
static int sprd_pmic_eic_request(struct gpio_chip *chip, unsigned int offset)
{
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 1);
return 0;
}
static void sprd_pmic_eic_free(struct gpio_chip *chip, unsigned int offset)
{
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_DMSK, 0);
}
static int sprd_pmic_eic_get(struct gpio_chip *chip, unsigned int offset)
{
return sprd_pmic_eic_read(chip, offset, SPRD_PMIC_EIC_DATA);
}
static int sprd_pmic_eic_direction_input(struct gpio_chip *chip,
unsigned int offset)
{
/* EICs are always input, nothing need to do here. */
return 0;
}
static void sprd_pmic_eic_set(struct gpio_chip *chip, unsigned int offset,
int value)
{
/* EICs are always input, nothing need to do here. */
}
static int sprd_pmic_eic_set_debounce(struct gpio_chip *chip,
unsigned int offset,
unsigned int debounce)
{
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 reg, value;
int ret;
reg = SPRD_PMIC_EIC_CTRL0 + SPRD_PMIC_EIC_BIT(offset) * 0x4;
ret = regmap_read(pmic_eic->map, pmic_eic->offset + reg, &value);
if (ret)
return ret;
value &= ~SPRD_PMIC_EIC_DBNC_MASK;
value |= (debounce / 1000) & SPRD_PMIC_EIC_DBNC_MASK;
return regmap_write(pmic_eic->map, pmic_eic->offset + reg, value);
}
static int sprd_pmic_eic_set_config(struct gpio_chip *chip, unsigned int offset,
unsigned long config)
{
unsigned long param = pinconf_to_config_param(config);
u32 arg = pinconf_to_config_argument(config);
if (param == PIN_CONFIG_INPUT_DEBOUNCE)
return sprd_pmic_eic_set_debounce(chip, offset, arg);
return -ENOTSUPP;
}
static void sprd_pmic_eic_irq_mask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
pmic_eic->reg[REG_IE] = 0;
pmic_eic->reg[REG_TRIG] = 0;
}
static void sprd_pmic_eic_irq_unmask(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
pmic_eic->reg[REG_IE] = 1;
pmic_eic->reg[REG_TRIG] = 1;
}
static int sprd_pmic_eic_irq_set_type(struct irq_data *data,
unsigned int flow_type)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
switch (flow_type) {
case IRQ_TYPE_LEVEL_HIGH:
pmic_eic->reg[REG_IEV] = 1;
break;
case IRQ_TYPE_LEVEL_LOW:
pmic_eic->reg[REG_IEV] = 0;
break;
case IRQ_TYPE_EDGE_RISING:
case IRQ_TYPE_EDGE_FALLING:
case IRQ_TYPE_EDGE_BOTH:
/*
* Will set the trigger level according to current EIC level
* in irq_bus_sync_unlock() interface, so here nothing to do.
*/
break;
default:
return -ENOTSUPP;
}
return 0;
}
static void sprd_pmic_eic_bus_lock(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
mutex_lock(&pmic_eic->buslock);
}
static void sprd_pmic_eic_bus_sync_unlock(struct irq_data *data)
{
struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
struct sprd_pmic_eic *pmic_eic = gpiochip_get_data(chip);
u32 trigger = irqd_get_trigger_type(data);
u32 offset = irqd_to_hwirq(data);
int state;
/* Set irq type */
if (trigger & IRQ_TYPE_EDGE_BOTH) {
state = sprd_pmic_eic_get(chip, offset);
if (state)
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
else
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
} else {
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV,
pmic_eic->reg[REG_IEV]);
}
/* Set irq unmask */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE,
pmic_eic->reg[REG_IE]);
/* Generate trigger start pulse for debounce EIC */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG,
pmic_eic->reg[REG_TRIG]);
mutex_unlock(&pmic_eic->buslock);
}
static void sprd_pmic_eic_toggle_trigger(struct gpio_chip *chip,
unsigned int irq, unsigned int offset)
{
u32 trigger = irq_get_trigger_type(irq);
int state, post_state;
if (!(trigger & IRQ_TYPE_EDGE_BOTH))
return;
state = sprd_pmic_eic_get(chip, offset);
retry:
if (state)
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 0);
else
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IEV, 1);
post_state = sprd_pmic_eic_get(chip, offset);
if (state != post_state) {
dev_warn(chip->parent, "PMIC EIC level was changed.\n");
state = post_state;
goto retry;
}
/* Set irq unmask */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_IE, 1);
/* Generate trigger start pulse for debounce EIC */
sprd_pmic_eic_update(chip, offset, SPRD_PMIC_EIC_TRIG, 1);
}
static irqreturn_t sprd_pmic_eic_irq_handler(int irq, void *data)
{
struct sprd_pmic_eic *pmic_eic = data;
struct gpio_chip *chip = &pmic_eic->chip;
unsigned long status;
u32 n, girq, val;
int ret;
ret = regmap_read(pmic_eic->map, pmic_eic->offset + SPRD_PMIC_EIC_MIS,
&val);
if (ret)
return IRQ_RETVAL(ret);
status = val & SPRD_PMIC_EIC_DATA_MASK;
for_each_set_bit(n, &status, chip->ngpio) {
/* Clear the interrupt */
sprd_pmic_eic_update(chip, n, SPRD_PMIC_EIC_IC, 1);
girq = irq_find_mapping(chip->irq.domain, n);
handle_nested_irq(girq);
/*
* The PMIC EIC can only support level trigger, so we can
* toggle the level trigger to emulate the edge trigger.
*/
sprd_pmic_eic_toggle_trigger(chip, girq, n);
}
return IRQ_HANDLED;
}
static int sprd_pmic_eic_probe(struct platform_device *pdev)
{
struct gpio_irq_chip *irq;
struct sprd_pmic_eic *pmic_eic;
int ret;
pmic_eic = devm_kzalloc(&pdev->dev, sizeof(*pmic_eic), GFP_KERNEL);
if (!pmic_eic)
return -ENOMEM;
mutex_init(&pmic_eic->buslock);
pmic_eic->irq = platform_get_irq(pdev, 0);
if (pmic_eic->irq < 0)
return pmic_eic->irq;
pmic_eic->map = dev_get_regmap(pdev->dev.parent, NULL);
if (!pmic_eic->map)
return -ENODEV;
ret = of_property_read_u32(pdev->dev.of_node, "reg", &pmic_eic->offset);
if (ret) {
dev_err(&pdev->dev, "Failed to get PMIC EIC base address.\n");
return ret;
}
ret = devm_request_threaded_irq(&pdev->dev, pmic_eic->irq, NULL,
sprd_pmic_eic_irq_handler,
IRQF_ONESHOT | IRQF_NO_SUSPEND,
dev_name(&pdev->dev), pmic_eic);
if (ret) {
dev_err(&pdev->dev, "Failed to request PMIC EIC IRQ.\n");
return ret;
}
pmic_eic->chip.label = dev_name(&pdev->dev);
pmic_eic->chip.ngpio = SPRD_PMIC_EIC_NR;
pmic_eic->chip.base = -1;
pmic_eic->chip.parent = &pdev->dev;
pmic_eic->chip.direction_input = sprd_pmic_eic_direction_input;
pmic_eic->chip.request = sprd_pmic_eic_request;
pmic_eic->chip.free = sprd_pmic_eic_free;
pmic_eic->chip.set_config = sprd_pmic_eic_set_config;
pmic_eic->chip.set = sprd_pmic_eic_set;
pmic_eic->chip.get = sprd_pmic_eic_get;
pmic_eic->intc.name = dev_name(&pdev->dev);
pmic_eic->intc.irq_mask = sprd_pmic_eic_irq_mask;
pmic_eic->intc.irq_unmask = sprd_pmic_eic_irq_unmask;
pmic_eic->intc.irq_set_type = sprd_pmic_eic_irq_set_type;
pmic_eic->intc.irq_bus_lock = sprd_pmic_eic_bus_lock;
pmic_eic->intc.irq_bus_sync_unlock = sprd_pmic_eic_bus_sync_unlock;
pmic_eic->intc.flags = IRQCHIP_SKIP_SET_WAKE;
irq = &pmic_eic->chip.irq;
irq->chip = &pmic_eic->intc;
irq->threaded = true;
ret = devm_gpiochip_add_data(&pdev->dev, &pmic_eic->chip, pmic_eic);
if (ret < 0) {
dev_err(&pdev->dev, "Could not register gpiochip %d.\n", ret);
return ret;
}
platform_set_drvdata(pdev, pmic_eic);
return 0;
}
static const struct of_device_id sprd_pmic_eic_of_match[] = {
{ .compatible = "sprd,sc2731-eic", },
{ /* end of list */ }
};
MODULE_DEVICE_TABLE(of, sprd_pmic_eic_of_match);
static struct platform_driver sprd_pmic_eic_driver = {
.probe = sprd_pmic_eic_probe,
.driver = {
.name = "sprd-pmic-eic",
.of_match_table = sprd_pmic_eic_of_match,
},
};
module_platform_driver(sprd_pmic_eic_driver);
MODULE_DESCRIPTION("Spreadtrum PMIC EIC driver");
MODULE_LICENSE("GPL v2");