2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/include/net/mac802154.h
alex.bluesman.smirnov@gmail.com 32bad7e30f mac802154: add wpan device-class support
Every real 802.15.4 transceiver, which works with software MAC layer,
can be classified as a wpan device in this stack. So the wpan device
implementation provides missing link in datapath between the device
drivers and the Linux network queue.

According to the IEEE 802.15.4 standard each packet can be one of the
following types:
 - beacon
 - MAC layer command
 - ACK
 - data

This patch adds support for the data packet-type only, but this is
enough to perform data transmission and receiving over radio.

Signed-off-by: Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26 21:06:11 -07:00

145 lines
5.1 KiB
C

/*
* IEEE802.15.4-2003 specification
*
* Copyright (C) 2007-2012 Siemens AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef NET_MAC802154_H
#define NET_MAC802154_H
#include <net/af_ieee802154.h>
/* General MAC frame format:
* 2 bytes: Frame Control
* 1 byte: Sequence Number
* 20 bytes: Addressing fields
* 14 bytes: Auxiliary Security Header
*/
#define MAC802154_FRAME_HARD_HEADER_LEN (2 + 1 + 20 + 14)
/* The following flags are used to indicate changed address settings from
* the stack to the hardware.
*/
/* indicates that the Short Address changed */
#define IEEE802515_AFILT_SADDR_CHANGED 0x00000001
/* indicates that the IEEE Address changed */
#define IEEE802515_AFILT_IEEEADDR_CHANGED 0x00000002
/* indicates that the PAN ID changed */
#define IEEE802515_AFILT_PANID_CHANGED 0x00000004
/* indicates that PAN Coordinator status changed */
#define IEEE802515_AFILT_PANC_CHANGED 0x00000008
struct ieee802154_hw_addr_filt {
__le16 pan_id; /* Each independent PAN selects a unique
* identifier. This PAN id allows communication
* between devices within a network using short
* addresses and enables transmissions between
* devices across independent networks.
*/
__le16 short_addr;
u8 ieee_addr[IEEE802154_ADDR_LEN];
u8 pan_coord;
};
struct ieee802154_dev {
/* filled by the driver */
int extra_tx_headroom;
u32 flags;
struct device *parent;
/* filled by mac802154 core */
struct ieee802154_hw_addr_filt hw_filt;
void *priv;
struct wpan_phy *phy;
};
/* Checksum is in hardware and is omitted from a packet
*
* These following flags are used to indicate hardware capabilities to
* the stack. Generally, flags here should have their meaning
* done in a way that the simplest hardware doesn't need setting
* any particular flags. There are some exceptions to this rule,
* however, so you are advised to review these flags carefully.
*/
/* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
#define IEEE802154_HW_OMIT_CKSUM 0x00000001
/* Indicates that receiver will autorespond with ACK frames. */
#define IEEE802154_HW_AACK 0x00000002
/* struct ieee802154_ops - callbacks from mac802154 to the driver
*
* This structure contains various callbacks that the driver may
* handle or, in some cases, must handle, for example to transmit
* a frame.
*
* start: Handler that 802.15.4 module calls for device initialization.
* This function is called before the first interface is attached.
*
* stop: Handler that 802.15.4 module calls for device cleanup.
* This function is called after the last interface is removed.
*
* xmit: Handler that 802.15.4 module calls for each transmitted frame.
* skb cntains the buffer starting from the IEEE 802.15.4 header.
* The low-level driver should send the frame based on available
* configuration.
* This function should return zero or negative errno. Called with
* pib_lock held.
*
* ed: Handler that 802.15.4 module calls for Energy Detection.
* This function should place the value for detected energy
* (usually device-dependant) in the level pointer and return
* either zero or negative errno. Called with pib_lock held.
*
* set_channel:
* Set radio for listening on specific channel.
* Set the device for listening on specified channel.
* Returns either zero, or negative errno. Called with pib_lock held.
*
* set_hw_addr_filt:
* Set radio for listening on specific address.
* Set the device for listening on specified address.
* Returns either zero, or negative errno.
*/
struct ieee802154_ops {
struct module *owner;
int (*start)(struct ieee802154_dev *dev);
void (*stop)(struct ieee802154_dev *dev);
int (*xmit)(struct ieee802154_dev *dev,
struct sk_buff *skb);
int (*ed)(struct ieee802154_dev *dev, u8 *level);
int (*set_channel)(struct ieee802154_dev *dev,
int page,
int channel);
int (*set_hw_addr_filt)(struct ieee802154_dev *dev,
struct ieee802154_hw_addr_filt *filt,
unsigned long changed);
int (*ieee_addr)(struct ieee802154_dev *dev,
u8 addr[IEEE802154_ADDR_LEN]);
};
/* Basic interface to register ieee802154 device */
struct ieee802154_dev *
ieee802154_alloc_device(size_t priv_data_lex, struct ieee802154_ops *ops);
void ieee802154_free_device(struct ieee802154_dev *dev);
int ieee802154_register_device(struct ieee802154_dev *dev);
void ieee802154_unregister_device(struct ieee802154_dev *dev);
void ieee802154_rx_irqsafe(struct ieee802154_dev *dev, struct sk_buff *skb,
u8 lqi);
#endif /* NET_MAC802154_H */