2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
linux-next/arch/arm/mach-pxa/sharpsl_pm.h
Robert Jarzmik ca26475bf0 ARM: pxa: fix GPIO double shifts
The commit 9bf448c66d ("ARM: pxa: use generic gpio operation instead of
gpio register") from Oct 17, 2011, leads to the following static checker
warning:
  arch/arm/mach-pxa/spitz_pm.c:172 spitz_charger_wakeup()
  warn: double left shift '!gpio_get_value(SPITZ_GPIO_KEY_INT)
        << (1 << ((SPITZ_GPIO_KEY_INT) & 31))'

As Dan reported, the value is shifted three times :
 - once by gpio_get_value(), which returns either 0 or BIT(gpio)
 - once by the shift operation '<<'
 - a last time by GPIO_bit(gpio) which is BIT(gpio)

Therefore the calculation lead to a chained or operator of :
 - (1 << gpio) << (1 << gpio) = (2^gpio)^gpio = 2 ^ (gpio * gpio)

It is be sheer luck the former statement works, only because each gpio
used is strictly smaller than 6, and therefore 2^(gpio^2) never
overflows a 32 bits value, and because it is used as a boolean value to
check a gpio activation.

As the xxx_charger_wakeup() functions are used as a true/false detection
mechanism, take that opportunity to change their prototypes from integer
return value to boolean one.

Fixes: 9bf448c66d ("ARM: pxa: use generic gpio operation instead of
gpio register")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-09-09 18:07:59 +02:00

114 lines
3.1 KiB
C

/*
* SharpSL Battery/PM Driver
*
* Copyright (c) 2004-2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _MACH_SHARPSL_PM
#define _MACH_SHARPSL_PM
struct sharpsl_charger_machinfo {
void (*init)(void);
void (*exit)(void);
int gpio_acin;
int gpio_batfull;
int batfull_irq;
int gpio_batlock;
int gpio_fatal;
void (*discharge)(int);
void (*discharge1)(int);
void (*charge)(int);
void (*measure_temp)(int);
void (*presuspend)(void);
void (*postsuspend)(void);
void (*earlyresume)(void);
unsigned long (*read_devdata)(int);
#define SHARPSL_BATT_VOLT 1
#define SHARPSL_BATT_TEMP 2
#define SHARPSL_ACIN_VOLT 3
#define SHARPSL_STATUS_ACIN 4
#define SHARPSL_STATUS_LOCK 5
#define SHARPSL_STATUS_CHRGFULL 6
#define SHARPSL_STATUS_FATAL 7
bool (*charger_wakeup)(void);
int (*should_wakeup)(unsigned int resume_on_alarm);
void (*backlight_limit)(int);
int (*backlight_get_status) (void);
int charge_on_volt;
int charge_on_temp;
int charge_acin_high;
int charge_acin_low;
int fatal_acin_volt;
int fatal_noacin_volt;
int bat_levels;
struct battery_thresh *bat_levels_noac;
struct battery_thresh *bat_levels_acin;
struct battery_thresh *bat_levels_noac_bl;
struct battery_thresh *bat_levels_acin_bl;
int status_high_acin;
int status_low_acin;
int status_high_noac;
int status_low_noac;
};
struct battery_thresh {
int voltage;
int percentage;
};
struct battery_stat {
int ac_status; /* APM AC Present/Not Present */
int mainbat_status; /* APM Main Battery Status */
int mainbat_percent; /* Main Battery Percentage Charge */
int mainbat_voltage; /* Main Battery Voltage */
};
struct sharpsl_pm_status {
struct device *dev;
struct timer_list ac_timer;
struct timer_list chrg_full_timer;
int charge_mode;
#define CHRG_ERROR (-1)
#define CHRG_OFF (0)
#define CHRG_ON (1)
#define CHRG_DONE (2)
unsigned int flags;
#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */
#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */
#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */
#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */
#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */
int full_count;
unsigned long charge_start_time;
struct sharpsl_charger_machinfo *machinfo;
struct battery_stat battstat;
};
extern struct sharpsl_pm_status sharpsl_pm;
extern struct battery_thresh sharpsl_battery_levels_acin[];
extern struct battery_thresh sharpsl_battery_levels_noac[];
#define SHARPSL_LED_ERROR 2
#define SHARPSL_LED_ON 1
#define SHARPSL_LED_OFF 0
void sharpsl_battery_kick(void);
void sharpsl_pm_led(int val);
/* MAX1111 Channel Definitions */
#define MAX1111_BATT_VOLT 4u
#define MAX1111_BATT_TEMP 2u
#define MAX1111_ACIN_VOLT 6u
int sharpsl_pm_pxa_read_max1111(int channel);
void corgi_lcd_limit_intensity(int limit);
#endif