mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
c5a51053cf
TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight dri= ver and current sinks. This patch enables LP8788 backlight module. (Brightness mode) The brightness is controlled by PWM input or I2C register. All modes are supported in the driver. (Platform data) Configurable data can be defined in the platform side. name : backlight driver name. (default: "lcd-backlight") initial_brightness : initial value of backlight brightness bl_mode : brightness control by PWM or lp8788 register dim_mode : dimming mode selection full_scale : full scale current setting rise_time : brightness ramp up step time fall_time : brightness ramp down step time pwm_pol : PWM polarity setting when bl_mode is PWM based period_ns : platform specific PWM period value. unit is nano. The default values are set in case no platform data is defined. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: "devendra.aaru" <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
424 lines
12 KiB
Plaintext
424 lines
12 KiB
Plaintext
#
|
|
# Backlight & LCD drivers configuration
|
|
#
|
|
|
|
menuconfig BACKLIGHT_LCD_SUPPORT
|
|
bool "Backlight & LCD device support"
|
|
help
|
|
Enable this to be able to choose the drivers for controlling the
|
|
backlight and the LCD panel on some platforms, for example on PDAs.
|
|
|
|
if BACKLIGHT_LCD_SUPPORT
|
|
|
|
#
|
|
# LCD
|
|
#
|
|
config LCD_CLASS_DEVICE
|
|
tristate "Lowlevel LCD controls"
|
|
default m
|
|
help
|
|
This framework adds support for low-level control of LCD.
|
|
Some framebuffer devices connect to platform-specific LCD modules
|
|
in order to have a platform-specific way to control the flat panel
|
|
(contrast and applying power to the LCD (not to the backlight!)).
|
|
|
|
To have support for your specific LCD panel you will have to
|
|
select the proper drivers which depend on this option.
|
|
|
|
if LCD_CLASS_DEVICE
|
|
|
|
config LCD_CORGI
|
|
tristate "LCD Panel support for SHARP corgi/spitz model"
|
|
depends on SPI_MASTER && PXA_SHARPSL
|
|
help
|
|
Say y here to support the LCD panels usually found on SHARP
|
|
corgi (C7x0) and spitz (Cxx00) models.
|
|
|
|
config LCD_L4F00242T03
|
|
tristate "Epson L4F00242T03 LCD"
|
|
depends on SPI_MASTER && GENERIC_GPIO
|
|
help
|
|
SPI driver for Epson L4F00242T03. This provides basic support
|
|
for init and powering the LCD up/down through a sysfs interface.
|
|
|
|
config LCD_LMS283GF05
|
|
tristate "Samsung LMS283GF05 LCD"
|
|
depends on SPI_MASTER && GENERIC_GPIO
|
|
help
|
|
SPI driver for Samsung LMS283GF05. This provides basic support
|
|
for powering the LCD up/down through a sysfs interface.
|
|
|
|
config LCD_LTV350QV
|
|
tristate "Samsung LTV350QV LCD Panel"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you have a Samsung LTV350QV LCD panel, say y to include a
|
|
power control driver for it. The panel starts up in power
|
|
off state, so you need this driver in order to see any
|
|
output.
|
|
|
|
The LTV350QV panel is present on all ATSTK1000 boards.
|
|
|
|
config LCD_ILI9320
|
|
tristate "ILI Technology ILI9320 controller support"
|
|
depends on SPI
|
|
help
|
|
If you have a panel based on the ILI9320 controller chip
|
|
then say y to include a power driver for it.
|
|
|
|
config LCD_TDO24M
|
|
tristate "Toppoly TDO24M and TDO35S LCD Panels support"
|
|
depends on SPI_MASTER
|
|
help
|
|
If you have a Toppoly TDO24M/TDO35S series LCD panel, say y here to
|
|
include the support for it.
|
|
|
|
config LCD_VGG2432A4
|
|
tristate "VGG2432A4 LCM device support"
|
|
depends on SPI_MASTER
|
|
select LCD_ILI9320
|
|
help
|
|
If you have a VGG2432A4 panel based on the ILI9320 controller chip
|
|
then say y to include a power driver for it.
|
|
|
|
config LCD_PLATFORM
|
|
tristate "Platform LCD controls"
|
|
help
|
|
This driver provides a platform-device registered LCD power
|
|
control interface.
|
|
|
|
config LCD_TOSA
|
|
tristate "Sharp SL-6000 LCD Driver"
|
|
depends on I2C && SPI && MACH_TOSA
|
|
help
|
|
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
|
|
for its LCD.
|
|
|
|
config LCD_HP700
|
|
tristate "HP Jornada 700 series LCD Driver"
|
|
depends on SA1100_JORNADA720_SSP && !PREEMPT
|
|
default y
|
|
help
|
|
If you have an HP Jornada 700 series handheld (710/720/728)
|
|
say Y to enable LCD control driver.
|
|
|
|
config LCD_S6E63M0
|
|
tristate "S6E63M0 AMOLED LCD Driver"
|
|
depends on SPI && BACKLIGHT_CLASS_DEVICE
|
|
default n
|
|
help
|
|
If you have an S6E63M0 LCD Panel, say Y to enable its
|
|
LCD control driver.
|
|
|
|
config LCD_LD9040
|
|
tristate "LD9040 AMOLED LCD Driver"
|
|
depends on SPI && BACKLIGHT_CLASS_DEVICE
|
|
default n
|
|
help
|
|
If you have an LD9040 Panel, say Y to enable its
|
|
control driver.
|
|
|
|
config LCD_AMS369FG06
|
|
tristate "AMS369FG06 AMOLED LCD Driver"
|
|
depends on SPI && BACKLIGHT_CLASS_DEVICE
|
|
default n
|
|
help
|
|
If you have an AMS369FG06 AMOLED Panel, say Y to enable its
|
|
LCD control driver.
|
|
|
|
config LCD_LMS501KF03
|
|
tristate "LMS501KF03 LCD Driver"
|
|
depends on SPI
|
|
default n
|
|
help
|
|
If you have an LMS501KF03 LCD Panel, say Y to enable its
|
|
LCD control driver.
|
|
|
|
config LCD_HX8357
|
|
tristate "Himax HX-8357 LCD Driver"
|
|
depends on SPI
|
|
help
|
|
If you have a HX-8357 LCD panel, say Y to enable its LCD control
|
|
driver.
|
|
|
|
endif # LCD_CLASS_DEVICE
|
|
|
|
#
|
|
# Backlight
|
|
#
|
|
config BACKLIGHT_CLASS_DEVICE
|
|
tristate "Lowlevel Backlight controls"
|
|
default m
|
|
help
|
|
This framework adds support for low-level control of the LCD
|
|
backlight. This includes support for brightness and power.
|
|
|
|
To have support for your specific LCD panel you will have to
|
|
select the proper drivers which depend on this option.
|
|
|
|
if BACKLIGHT_CLASS_DEVICE
|
|
|
|
config BACKLIGHT_ATMEL_LCDC
|
|
bool "Atmel LCDC Contrast-as-Backlight control"
|
|
depends on FB_ATMEL
|
|
default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
|
|
help
|
|
This provides a backlight control internal to the Atmel LCDC
|
|
driver. If the LCD "contrast control" on your board is wired
|
|
so it controls the backlight brightness, select this option to
|
|
export this as a PWM-based backlight control.
|
|
|
|
If in doubt, it's safe to enable this option; it doesn't kick
|
|
in unless the board's description says it's wired that way.
|
|
|
|
config BACKLIGHT_ATMEL_PWM
|
|
tristate "Atmel PWM backlight control"
|
|
depends on ATMEL_PWM
|
|
help
|
|
Say Y here if you want to use the PWM peripheral in Atmel AT91 and
|
|
AVR32 devices. This driver will need additional platform data to know
|
|
which PWM instance to use and how to configure it.
|
|
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called atmel-pwm-bl.
|
|
|
|
config BACKLIGHT_EP93XX
|
|
tristate "Cirrus EP93xx Backlight Driver"
|
|
depends on FB_EP93XX
|
|
help
|
|
If you have a LCD backlight connected to the BRIGHT output of
|
|
the EP93xx, say Y here to enable this driver.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called ep93xx_bl.
|
|
|
|
config BACKLIGHT_GENERIC
|
|
tristate "Generic (aka Sharp Corgi) Backlight Driver"
|
|
default y
|
|
help
|
|
Say y to enable the generic platform backlight driver previously
|
|
known as the Corgi backlight driver. If you have a Sharp Zaurus
|
|
SL-C7xx, SL-Cxx00 or SL-6000x say y.
|
|
|
|
config BACKLIGHT_LM3533
|
|
tristate "Backlight Driver for LM3533"
|
|
depends on BACKLIGHT_CLASS_DEVICE
|
|
depends on MFD_LM3533
|
|
help
|
|
Say Y to enable the backlight driver for National Semiconductor / TI
|
|
LM3533 Lighting Power chips.
|
|
|
|
The backlights can be controlled directly, through PWM input, or by
|
|
the ambient-light-sensor interface. The chip supports 256 brightness
|
|
levels.
|
|
|
|
config BACKLIGHT_LOCOMO
|
|
tristate "Sharp LOCOMO LCD/Backlight Driver"
|
|
depends on SHARP_LOCOMO
|
|
default y
|
|
help
|
|
If you have a Sharp Zaurus SL-5500 (Collie) or SL-5600 (Poodle) say y to
|
|
enable the LCD/backlight driver.
|
|
|
|
config BACKLIGHT_OMAP1
|
|
tristate "OMAP1 PWL-based LCD Backlight"
|
|
depends on ARCH_OMAP1
|
|
default y
|
|
help
|
|
This driver controls the LCD backlight level and power for
|
|
the PWL module of OMAP1 processors. Say Y if your board
|
|
uses this hardware.
|
|
|
|
config BACKLIGHT_HP680
|
|
tristate "HP Jornada 680 Backlight Driver"
|
|
depends on SH_HP6XX
|
|
default y
|
|
help
|
|
If you have a HP Jornada 680, say y to enable the
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_HP700
|
|
tristate "HP Jornada 700 series Backlight Driver"
|
|
depends on SA1100_JORNADA720_SSP && !PREEMPT
|
|
default y
|
|
help
|
|
If you have an HP Jornada 700 series,
|
|
say Y to include backlight control driver.
|
|
|
|
config BACKLIGHT_CARILLO_RANCH
|
|
tristate "Intel Carillo Ranch Backlight Driver"
|
|
depends on LCD_CLASS_DEVICE && PCI && X86 && FB_LE80578
|
|
help
|
|
If you have a Intel LE80578 (Carillo Ranch) say Y to enable the
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_PWM
|
|
tristate "Generic PWM based Backlight Driver"
|
|
depends on PWM
|
|
help
|
|
If you have a LCD backlight adjustable by PWM, say Y to enable
|
|
this driver.
|
|
|
|
config BACKLIGHT_DA903X
|
|
tristate "Backlight Driver for DA9030/DA9034 using WLED"
|
|
depends on PMIC_DA903X
|
|
help
|
|
If you have a LCD backlight connected to the WLED output of DA9030
|
|
or DA9034 WLED output, say Y here to enable this driver.
|
|
|
|
config BACKLIGHT_DA9052
|
|
tristate "Dialog DA9052/DA9053 WLED"
|
|
depends on PMIC_DA9052
|
|
help
|
|
Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs.
|
|
|
|
config BACKLIGHT_MAX8925
|
|
tristate "Backlight driver for MAX8925"
|
|
depends on MFD_MAX8925
|
|
help
|
|
If you have a LCD backlight connected to the WLED output of MAX8925
|
|
WLED output, say Y here to enable this driver.
|
|
|
|
config BACKLIGHT_APPLE
|
|
tristate "Apple Backlight Driver"
|
|
depends on X86 && ACPI
|
|
help
|
|
If you have an Intel-based Apple say Y to enable a driver for its
|
|
backlight.
|
|
|
|
config BACKLIGHT_TOSA
|
|
tristate "Sharp SL-6000 Backlight Driver"
|
|
depends on I2C && MACH_TOSA && LCD_TOSA
|
|
help
|
|
If you have an Sharp SL-6000 Zaurus say Y to enable a driver
|
|
for its backlight
|
|
|
|
config BACKLIGHT_SAHARA
|
|
tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
|
|
depends on X86
|
|
help
|
|
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_WM831X
|
|
tristate "WM831x PMIC Backlight Driver"
|
|
depends on MFD_WM831X
|
|
help
|
|
If you have a backlight driven by the ISINK and DCDC of a
|
|
WM831x PMIC say y to enable the backlight driver for it.
|
|
|
|
config BACKLIGHT_ADP5520
|
|
tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
|
|
depends on PMIC_ADP5520
|
|
help
|
|
If you have a LCD backlight connected to the BST/BL_SNK output of
|
|
ADP5520 or ADP5501, say Y here to enable this driver.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called adp5520_bl.
|
|
|
|
config BACKLIGHT_ADP8860
|
|
tristate "Backlight Driver for ADP8860/ADP8861/ADP8863 using WLED"
|
|
depends on BACKLIGHT_CLASS_DEVICE && I2C
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
help
|
|
If you have a LCD backlight connected to the ADP8860, ADP8861 or
|
|
ADP8863 say Y here to enable this driver.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called adp8860_bl.
|
|
|
|
config BACKLIGHT_ADP8870
|
|
tristate "Backlight Driver for ADP8870 using WLED"
|
|
depends on BACKLIGHT_CLASS_DEVICE && I2C
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
help
|
|
If you have a LCD backlight connected to the ADP8870,
|
|
say Y here to enable this driver.
|
|
|
|
To compile this driver as a module, choose M here: the module will
|
|
be called adp8870_bl.
|
|
|
|
config BACKLIGHT_88PM860X
|
|
tristate "Backlight Driver for 88PM8606 using WLED"
|
|
depends on MFD_88PM860X
|
|
help
|
|
Say Y to enable the backlight driver for Marvell 88PM8606.
|
|
|
|
config BACKLIGHT_PCF50633
|
|
tristate "Backlight driver for NXP PCF50633 MFD"
|
|
depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
|
|
help
|
|
If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
|
|
enable its driver.
|
|
|
|
config BACKLIGHT_AAT2870
|
|
tristate "AnalogicTech AAT2870 Backlight"
|
|
depends on BACKLIGHT_CLASS_DEVICE && MFD_AAT2870_CORE
|
|
help
|
|
If you have a AnalogicTech AAT2870 say Y to enable the
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_LM3630
|
|
tristate "Backlight Driver for LM3630"
|
|
depends on BACKLIGHT_CLASS_DEVICE && I2C
|
|
select REGMAP_I2C
|
|
help
|
|
This supports TI LM3630 Backlight Driver
|
|
|
|
config BACKLIGHT_LM3639
|
|
tristate "Backlight Driver for LM3639"
|
|
depends on BACKLIGHT_CLASS_DEVICE && I2C
|
|
select REGMAP_I2C
|
|
select NEW_LEDS
|
|
select LEDS_CLASS
|
|
help
|
|
This supports TI LM3639 Backlight + 1.5A Flash LED Driver
|
|
|
|
config BACKLIGHT_LP855X
|
|
tristate "Backlight driver for TI LP855X"
|
|
depends on BACKLIGHT_CLASS_DEVICE && I2C
|
|
help
|
|
This supports TI LP8550, LP8551, LP8552, LP8553, LP8556 and LP8557
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_LP8788
|
|
tristate "Backlight driver for TI LP8788 MFD"
|
|
depends on BACKLIGHT_CLASS_DEVICE && MFD_LP8788
|
|
help
|
|
This supports TI LP8788 backlight driver.
|
|
|
|
config BACKLIGHT_OT200
|
|
tristate "Backlight driver for ot200 visualisation device"
|
|
depends on BACKLIGHT_CLASS_DEVICE && CS5535_MFGPT && GPIO_CS5535
|
|
help
|
|
To compile this driver as a module, choose M here: the module will be
|
|
called ot200_bl.
|
|
|
|
config BACKLIGHT_PANDORA
|
|
tristate "Backlight driver for Pandora console"
|
|
depends on TWL4030_CORE
|
|
help
|
|
If you have a Pandora console, say Y to enable the
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_TPS65217
|
|
tristate "TPS65217 Backlight"
|
|
depends on BACKLIGHT_CLASS_DEVICE && MFD_TPS65217
|
|
help
|
|
If you have a Texas Instruments TPS65217 say Y to enable the
|
|
backlight driver.
|
|
|
|
config BACKLIGHT_AS3711
|
|
tristate "AS3711 Backlight"
|
|
depends on BACKLIGHT_CLASS_DEVICE && MFD_AS3711
|
|
help
|
|
If you have an Austrian Microsystems AS3711 say Y to enable the
|
|
backlight driver.
|
|
|
|
endif # BACKLIGHT_CLASS_DEVICE
|
|
|
|
endif # BACKLIGHT_LCD_SUPPORT
|