mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
f68e4041ef
New drivers: - New driver for the Microchip Serial GPIO "SGPIO". - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver. New subdrivers: - Intel Lakefield subdriver. - Intel Elkhart Lake subdriver. - Intel Alder Lake-S subdriver. - Qualcomm MSM8953 subdriver. - Qualcomm SDX55 subdriver. - Qualcomm SDX55 PMIC subdriver. - Ocelot Luton SoC subdriver. - Ocelot Serval SoC subdriver. Modularization: - The Meson driver can now be built as modules. - The Qualcomm driver(s) can now be built as modules. Incremental improvements: - The Intel driver now supports pin configuration for GPIO-related configurations. - A bunch of Renesas PFC drivers have been augmented with support for QSPI pins, groups and functions. - Non-critical fixes to the irq handling in the Allwinner Sunxi driver. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl/ab9AACgkQQRCzN7AZ XXOp5w/7B3JTngCneTa8jBG8rPv94zWMpnqvXBPhK1AZPB53IR48F2ssJMIhwJsj 4QRVjPhnrowqEZjOxr5Ia+pjnQvPL5JP8F/xKiZf5BpS6ccvQQFKdUcDHYzllffr davHSReb1YIDSST8M/iO9Iqjl2r6/5wLg0OQR26CpDhJc29I93xQA08OuLhqa33v SibmlCeizScn39gCcwZmfrdvJMPYcUE7zE1v38LgDAp9vt2dsdwAUQ6n8GBQYJF9 NgBA4LwLYlbVHEdhd/I8mNmAbKSpeHxFgKSEWyAaqYRDZkBmsHAEiliWVcnnBmW3 kH76FC+jMHW5dDII8vMAKB5c1Col/7GM4722+NnolPO9vTs93hT0aNy3l5Eh/nWN DUIZOqvMW4c5M5XZ8prKuTdBfCc3jC3BKiaTKQm/wJMY4SQpTjerB4jnWqRrzTus tlndz8bezQxwKkx8BAhLc5pE1zQEn5ZznLXqy62RMwd6ymdtOg4ZALQ9nyj2luaP cGoODMHNHA7BuaZ+dcIoikElCdeSiTNEfO53/UQiVi8BOx0zNT6ul9VlIgC+Utsk DVYAExg+yF5qw+2xhJxBoK4DqqVSe7xTbqrcY1oLdnWhfz8yGkHh91ONos+9u1sY 2vnjNW4BIfSgEApbZIb7KRS0VCKXh4BzdI9+W9uKhsn6JIYyo1g= =e5sV -----END PGP SIGNATURE----- Merge tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v5.11 kernel. Drivers, drivers and drivers. Not a single core change. Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot SoCs. As part of the modularization attempt, I applied one patch affecting the firmware subsystem as a functional (not syntactic/semantic) dependency and then it blew up in our face, so I had to revert it, bummer. It will come in later, through that subsystem, I guess. New drivers: - New driver for the Microchip Serial GPIO "SGPIO". - Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver. New subdrivers: - Intel Lakefield subdriver. - Intel Elkhart Lake subdriver. - Intel Alder Lake-S subdriver. - Qualcomm MSM8953 subdriver. - Qualcomm SDX55 subdriver. - Qualcomm SDX55 PMIC subdriver. - Ocelot Luton SoC subdriver. - Ocelot Serval SoC subdriver. Modularization: - The Meson driver can now be built as modules. - The Qualcomm driver(s) can now be built as modules. Incremental improvements: - The Intel driver now supports pin configuration for GPIO-related configurations. - A bunch of Renesas PFC drivers have been augmented with support for QSPI pins, groups and functions. - Non-critical fixes to the irq handling in the Allwinner Sunxi driver" * tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits) pinctrl/spear: simplify the return expression of spear300_pinctrl_probe() pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1() dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5) pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings pinctrl: qcom-pmic-gpio: Add support for pmx55 dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error pinctrl: mtk: Fix low level output voltage issue pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe() pinctrl: actions: pinctrl-s500: Constify s500_padinfo[] pinctrl: pinctrl-microchip-sgpio: Add OF config dependency pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver pinctrl: at91-pio4: add support for fewer lines on last PIO bank pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller ...
1016 lines
27 KiB
C
1016 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* GPIO driver for AMD
|
|
*
|
|
* Copyright (c) 2014,2015 AMD Corporation.
|
|
* Authors: Ken Xue <Ken.Xue@amd.com>
|
|
* Wu, Jeff <Jeff.Wu@amd.com>
|
|
*
|
|
* Contact Information: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
|
|
* Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/list.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
#include "core.h"
|
|
#include "pinctrl-utils.h"
|
|
#include "pinctrl-amd.h"
|
|
|
|
static int amd_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
unsigned long flags;
|
|
u32 pin_reg;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
if (pin_reg & BIT(OUTPUT_ENABLE_OFF))
|
|
return GPIO_LINE_DIRECTION_OUT;
|
|
|
|
return GPIO_LINE_DIRECTION_IN;
|
|
}
|
|
|
|
static int amd_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
unsigned long flags;
|
|
u32 pin_reg;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
pin_reg &= ~BIT(OUTPUT_ENABLE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
|
|
int value)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
pin_reg |= BIT(OUTPUT_ENABLE_OFF);
|
|
if (value)
|
|
pin_reg |= BIT(OUTPUT_VALUE_OFF);
|
|
else
|
|
pin_reg &= ~BIT(OUTPUT_VALUE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_get_value(struct gpio_chip *gc, unsigned offset)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return !!(pin_reg & BIT(PIN_STS_OFF));
|
|
}
|
|
|
|
static void amd_gpio_set_value(struct gpio_chip *gc, unsigned offset, int value)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
if (value)
|
|
pin_reg |= BIT(OUTPUT_VALUE_OFF);
|
|
else
|
|
pin_reg &= ~BIT(OUTPUT_VALUE_OFF);
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
u32 time;
|
|
u32 pin_reg;
|
|
int ret = 0;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + offset * 4);
|
|
|
|
if (debounce) {
|
|
pin_reg |= DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF;
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
/*
|
|
Debounce Debounce Timer Max
|
|
TmrLarge TmrOutUnit Unit Debounce
|
|
Time
|
|
0 0 61 usec (2 RtcClk) 976 usec
|
|
0 1 244 usec (8 RtcClk) 3.9 msec
|
|
1 0 15.6 msec (512 RtcClk) 250 msec
|
|
1 1 62.5 msec (2048 RtcClk) 1 sec
|
|
*/
|
|
|
|
if (debounce < 61) {
|
|
pin_reg |= 1;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 976) {
|
|
time = debounce / 61;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 3900) {
|
|
time = debounce / 244;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 250000) {
|
|
time = debounce / 15625;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg |= BIT(DB_TMR_LARGE_OFF);
|
|
} else if (debounce < 1000000) {
|
|
time = debounce / 62500;
|
|
pin_reg |= time & DB_TMR_OUT_MASK;
|
|
pin_reg |= BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg |= BIT(DB_TMR_LARGE_OFF);
|
|
} else {
|
|
pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
|
|
ret = -EINVAL;
|
|
}
|
|
} else {
|
|
pin_reg &= ~BIT(DB_TMR_OUT_UNIT_OFF);
|
|
pin_reg &= ~BIT(DB_TMR_LARGE_OFF);
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
pin_reg &= ~(DB_CNTRl_MASK << DB_CNTRL_OFF);
|
|
}
|
|
writel(pin_reg, gpio_dev->base + offset * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
|
|
unsigned long config)
|
|
{
|
|
u32 debounce;
|
|
|
|
if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
|
|
return -ENOTSUPP;
|
|
|
|
debounce = pinconf_to_config_argument(config);
|
|
return amd_gpio_set_debounce(gc, offset, debounce);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
|
|
{
|
|
u32 pin_reg;
|
|
u32 db_cntrl;
|
|
unsigned long flags;
|
|
unsigned int bank, i, pin_num;
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
bool tmr_out_unit;
|
|
unsigned int time;
|
|
unsigned int unit;
|
|
bool tmr_large;
|
|
|
|
char *level_trig;
|
|
char *active_level;
|
|
char *interrupt_enable;
|
|
char *interrupt_mask;
|
|
char *wake_cntrl0;
|
|
char *wake_cntrl1;
|
|
char *wake_cntrl2;
|
|
char *pin_sts;
|
|
char *pull_up_sel;
|
|
char *pull_up_enable;
|
|
char *pull_down_enable;
|
|
char *output_value;
|
|
char *output_enable;
|
|
char debounce_value[40];
|
|
char *debounce_enable;
|
|
|
|
for (bank = 0; bank < gpio_dev->hwbank_num; bank++) {
|
|
seq_printf(s, "GPIO bank%d\t", bank);
|
|
|
|
switch (bank) {
|
|
case 0:
|
|
i = 0;
|
|
pin_num = AMD_GPIO_PINS_BANK0;
|
|
break;
|
|
case 1:
|
|
i = 64;
|
|
pin_num = AMD_GPIO_PINS_BANK1 + i;
|
|
break;
|
|
case 2:
|
|
i = 128;
|
|
pin_num = AMD_GPIO_PINS_BANK2 + i;
|
|
break;
|
|
case 3:
|
|
i = 192;
|
|
pin_num = AMD_GPIO_PINS_BANK3 + i;
|
|
break;
|
|
default:
|
|
/* Illegal bank number, ignore */
|
|
continue;
|
|
}
|
|
for (; i < pin_num; i++) {
|
|
seq_printf(s, "pin%d\t", i);
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + i * 4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
if (pin_reg & BIT(INTERRUPT_ENABLE_OFF)) {
|
|
u8 level = (pin_reg >> ACTIVE_LEVEL_OFF) &
|
|
ACTIVE_LEVEL_MASK;
|
|
interrupt_enable = "interrupt is enabled|";
|
|
|
|
if (level == ACTIVE_LEVEL_HIGH)
|
|
active_level = "Active high|";
|
|
else if (level == ACTIVE_LEVEL_LOW)
|
|
active_level = "Active low|";
|
|
else if (!(pin_reg & BIT(LEVEL_TRIG_OFF)) &&
|
|
level == ACTIVE_LEVEL_BOTH)
|
|
active_level = "Active on both|";
|
|
else
|
|
active_level = "Unknown Active level|";
|
|
|
|
if (pin_reg & BIT(LEVEL_TRIG_OFF))
|
|
level_trig = "Level trigger|";
|
|
else
|
|
level_trig = "Edge trigger|";
|
|
|
|
} else {
|
|
interrupt_enable =
|
|
"interrupt is disabled|";
|
|
active_level = " ";
|
|
level_trig = " ";
|
|
}
|
|
|
|
if (pin_reg & BIT(INTERRUPT_MASK_OFF))
|
|
interrupt_mask =
|
|
"interrupt is unmasked|";
|
|
else
|
|
interrupt_mask =
|
|
"interrupt is masked|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S0I3))
|
|
wake_cntrl0 = "enable wakeup in S0i3 state|";
|
|
else
|
|
wake_cntrl0 = "disable wakeup in S0i3 state|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S3))
|
|
wake_cntrl1 = "enable wakeup in S3 state|";
|
|
else
|
|
wake_cntrl1 = "disable wakeup in S3 state|";
|
|
|
|
if (pin_reg & BIT(WAKE_CNTRL_OFF_S4))
|
|
wake_cntrl2 = "enable wakeup in S4/S5 state|";
|
|
else
|
|
wake_cntrl2 = "disable wakeup in S4/S5 state|";
|
|
|
|
if (pin_reg & BIT(PULL_UP_ENABLE_OFF)) {
|
|
pull_up_enable = "pull-up is enabled|";
|
|
if (pin_reg & BIT(PULL_UP_SEL_OFF))
|
|
pull_up_sel = "8k pull-up|";
|
|
else
|
|
pull_up_sel = "4k pull-up|";
|
|
} else {
|
|
pull_up_enable = "pull-up is disabled|";
|
|
pull_up_sel = " ";
|
|
}
|
|
|
|
if (pin_reg & BIT(PULL_DOWN_ENABLE_OFF))
|
|
pull_down_enable = "pull-down is enabled|";
|
|
else
|
|
pull_down_enable = "Pull-down is disabled|";
|
|
|
|
if (pin_reg & BIT(OUTPUT_ENABLE_OFF)) {
|
|
pin_sts = " ";
|
|
output_enable = "output is enabled|";
|
|
if (pin_reg & BIT(OUTPUT_VALUE_OFF))
|
|
output_value = "output is high|";
|
|
else
|
|
output_value = "output is low|";
|
|
} else {
|
|
output_enable = "output is disabled|";
|
|
output_value = " ";
|
|
|
|
if (pin_reg & BIT(PIN_STS_OFF))
|
|
pin_sts = "input is high|";
|
|
else
|
|
pin_sts = "input is low|";
|
|
}
|
|
|
|
db_cntrl = (DB_CNTRl_MASK << DB_CNTRL_OFF) & pin_reg;
|
|
if (db_cntrl) {
|
|
tmr_out_unit = pin_reg & BIT(DB_TMR_OUT_UNIT_OFF);
|
|
tmr_large = pin_reg & BIT(DB_TMR_LARGE_OFF);
|
|
time = pin_reg & DB_TMR_OUT_MASK;
|
|
if (tmr_large) {
|
|
if (tmr_out_unit)
|
|
unit = 62500;
|
|
else
|
|
unit = 15625;
|
|
} else {
|
|
if (tmr_out_unit)
|
|
unit = 244;
|
|
else
|
|
unit = 61;
|
|
}
|
|
if ((DB_TYPE_REMOVE_GLITCH << DB_CNTRL_OFF) == db_cntrl)
|
|
debounce_enable = "debouncing filter (high and low) enabled|";
|
|
else if ((DB_TYPE_PRESERVE_LOW_GLITCH << DB_CNTRL_OFF) == db_cntrl)
|
|
debounce_enable = "debouncing filter (low) enabled|";
|
|
else
|
|
debounce_enable = "debouncing filter (high) enabled|";
|
|
|
|
snprintf(debounce_value, sizeof(debounce_value),
|
|
"debouncing timeout is %u (us)|", time * unit);
|
|
} else {
|
|
debounce_enable = "debouncing filter disabled|";
|
|
snprintf(debounce_value, sizeof(debounce_value), " ");
|
|
}
|
|
|
|
seq_printf(s, "%s %s %s %s %s %s\n"
|
|
" %s %s %s %s %s %s %s %s %s 0x%x\n",
|
|
level_trig, active_level, interrupt_enable,
|
|
interrupt_mask, wake_cntrl0, wake_cntrl1,
|
|
wake_cntrl2, pin_sts, pull_up_sel,
|
|
pull_up_enable, pull_down_enable,
|
|
output_value, output_enable,
|
|
debounce_enable, debounce_value, pin_reg);
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
#define amd_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
static void amd_gpio_irq_enable(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg |= BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg |= BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_disable(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg &= ~BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
pin_reg |= BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static void amd_gpio_irq_eoi(struct irq_data *d)
|
|
{
|
|
u32 reg;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
reg = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
reg |= EOI_MASK;
|
|
writel(reg, gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
}
|
|
|
|
static int amd_gpio_irq_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
int ret = 0;
|
|
u32 pin_reg, pin_reg_irq_en, mask;
|
|
unsigned long flags;
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
|
struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + (d->hwirq)*4);
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
pin_reg &= ~BIT(LEVEL_TRIG_OFF);
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= BOTH_EADGE << ACTIVE_LEVEL_OFF;
|
|
irq_set_handler_locked(d, handle_edge_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_HIGH << ACTIVE_LEVEL_OFF;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pin_reg |= LEVEL_TRIGGER << LEVEL_TRIG_OFF;
|
|
pin_reg &= ~(ACTIVE_LEVEL_MASK << ACTIVE_LEVEL_OFF);
|
|
pin_reg |= ACTIVE_LOW << ACTIVE_LEVEL_OFF;
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
break;
|
|
|
|
case IRQ_TYPE_NONE:
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev, "Invalid type value\n");
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pin_reg |= CLR_INTR_STAT << INTERRUPT_STS_OFF;
|
|
/*
|
|
* If WAKE_INT_MASTER_REG.MaskStsEn is set, a software write to the
|
|
* debounce registers of any GPIO will block wake/interrupt status
|
|
* generation for *all* GPIOs for a length of time that depends on
|
|
* WAKE_INT_MASTER_REG.MaskStsLength[11:0]. During this period the
|
|
* INTERRUPT_ENABLE bit will read as 0.
|
|
*
|
|
* We temporarily enable irq for the GPIO whose configuration is
|
|
* changing, and then wait for it to read back as 1 to know when
|
|
* debounce has settled and then disable the irq again.
|
|
* We do this polling with the spinlock held to ensure other GPIO
|
|
* access routines do not read an incorrect value for the irq enable
|
|
* bit of other GPIOs. We keep the GPIO masked while polling to avoid
|
|
* spurious irqs, and disable the irq again after polling.
|
|
*/
|
|
mask = BIT(INTERRUPT_ENABLE_OFF);
|
|
pin_reg_irq_en = pin_reg;
|
|
pin_reg_irq_en |= mask;
|
|
pin_reg_irq_en &= ~BIT(INTERRUPT_MASK_OFF);
|
|
writel(pin_reg_irq_en, gpio_dev->base + (d->hwirq)*4);
|
|
while ((readl(gpio_dev->base + (d->hwirq)*4) & mask) != mask)
|
|
continue;
|
|
writel(pin_reg, gpio_dev->base + (d->hwirq)*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void amd_irq_ack(struct irq_data *d)
|
|
{
|
|
/*
|
|
* based on HW design,there is no need to ack HW
|
|
* before handle current irq. But this routine is
|
|
* necessary for handle_edge_irq
|
|
*/
|
|
}
|
|
|
|
static struct irq_chip amd_gpio_irqchip = {
|
|
.name = "amd_gpio",
|
|
.irq_ack = amd_irq_ack,
|
|
.irq_enable = amd_gpio_irq_enable,
|
|
.irq_disable = amd_gpio_irq_disable,
|
|
.irq_mask = amd_gpio_irq_mask,
|
|
.irq_unmask = amd_gpio_irq_unmask,
|
|
.irq_eoi = amd_gpio_irq_eoi,
|
|
.irq_set_type = amd_gpio_irq_set_type,
|
|
.flags = IRQCHIP_SKIP_SET_WAKE,
|
|
};
|
|
|
|
#define PIN_IRQ_PENDING (BIT(INTERRUPT_STS_OFF) | BIT(WAKE_STS_OFF))
|
|
|
|
static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct amd_gpio *gpio_dev = dev_id;
|
|
struct gpio_chip *gc = &gpio_dev->gc;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
unsigned int i, irqnr;
|
|
unsigned long flags;
|
|
u32 __iomem *regs;
|
|
u32 regval;
|
|
u64 status, mask;
|
|
|
|
/* Read the wake status */
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
status = readl(gpio_dev->base + WAKE_INT_STATUS_REG1);
|
|
status <<= 32;
|
|
status |= readl(gpio_dev->base + WAKE_INT_STATUS_REG0);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
/* Bit 0-45 contain the relevant status bits */
|
|
status &= (1ULL << 46) - 1;
|
|
regs = gpio_dev->base;
|
|
for (mask = 1, irqnr = 0; status; mask <<= 1, regs += 4, irqnr += 4) {
|
|
if (!(status & mask))
|
|
continue;
|
|
status &= ~mask;
|
|
|
|
/* Each status bit covers four pins */
|
|
for (i = 0; i < 4; i++) {
|
|
regval = readl(regs + i);
|
|
if (!(regval & PIN_IRQ_PENDING) ||
|
|
!(regval & BIT(INTERRUPT_MASK_OFF)))
|
|
continue;
|
|
irq = irq_find_mapping(gc->irq.domain, irqnr + i);
|
|
if (irq != 0)
|
|
generic_handle_irq(irq);
|
|
|
|
/* Clear interrupt.
|
|
* We must read the pin register again, in case the
|
|
* value was changed while executing
|
|
* generic_handle_irq() above.
|
|
* If we didn't find a mapping for the interrupt,
|
|
* disable it in order to avoid a system hang caused
|
|
* by an interrupt storm.
|
|
*/
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
regval = readl(regs + i);
|
|
if (irq == 0) {
|
|
regval &= ~BIT(INTERRUPT_ENABLE_OFF);
|
|
dev_dbg(&gpio_dev->pdev->dev,
|
|
"Disabling spurious GPIO IRQ %d\n",
|
|
irqnr + i);
|
|
}
|
|
writel(regval, regs + i);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
}
|
|
|
|
/* Signal EOI to the GPIO unit */
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
regval = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
regval |= EOI_MASK;
|
|
writel(regval, gpio_dev->base + WAKE_INT_MASTER_REG);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return gpio_dev->ngroups;
|
|
}
|
|
|
|
static const char *amd_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned group)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return gpio_dev->groups[group].name;
|
|
}
|
|
|
|
static int amd_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned group,
|
|
const unsigned **pins,
|
|
unsigned *num_pins)
|
|
{
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*pins = gpio_dev->groups[group].pins;
|
|
*num_pins = gpio_dev->groups[group].npins;
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinctrl_ops amd_pinctrl_ops = {
|
|
.get_groups_count = amd_get_groups_count,
|
|
.get_group_name = amd_get_group_name,
|
|
.get_group_pins = amd_get_group_pins,
|
|
#ifdef CONFIG_OF
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
|
|
.dt_free_map = pinctrl_utils_free_map,
|
|
#endif
|
|
};
|
|
|
|
static int amd_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
u32 pin_reg;
|
|
unsigned arg;
|
|
unsigned long flags;
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
pin_reg = readl(gpio_dev->base + pin*4);
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
arg = pin_reg & DB_TMR_OUT_MASK;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
arg = (pin_reg >> PULL_DOWN_ENABLE_OFF) & BIT(0);
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
arg = (pin_reg >> PULL_UP_SEL_OFF) & (BIT(0) | BIT(1));
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
arg = (pin_reg >> DRV_STRENGTH_SEL_OFF) & DRV_STRENGTH_SEL_MASK;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev, "Invalid config param %04x\n",
|
|
param);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = pinconf_to_config_packed(param, arg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned num_configs)
|
|
{
|
|
int i;
|
|
u32 arg;
|
|
int ret = 0;
|
|
u32 pin_reg;
|
|
unsigned long flags;
|
|
enum pin_config_param param;
|
|
struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
raw_spin_lock_irqsave(&gpio_dev->lock, flags);
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
pin_reg = readl(gpio_dev->base + pin*4);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_INPUT_DEBOUNCE:
|
|
pin_reg &= ~DB_TMR_OUT_MASK;
|
|
pin_reg |= arg & DB_TMR_OUT_MASK;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_DOWN:
|
|
pin_reg &= ~BIT(PULL_DOWN_ENABLE_OFF);
|
|
pin_reg |= (arg & BIT(0)) << PULL_DOWN_ENABLE_OFF;
|
|
break;
|
|
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
pin_reg &= ~BIT(PULL_UP_SEL_OFF);
|
|
pin_reg |= (arg & BIT(0)) << PULL_UP_SEL_OFF;
|
|
pin_reg &= ~BIT(PULL_UP_ENABLE_OFF);
|
|
pin_reg |= ((arg>>1) & BIT(0)) << PULL_UP_ENABLE_OFF;
|
|
break;
|
|
|
|
case PIN_CONFIG_DRIVE_STRENGTH:
|
|
pin_reg &= ~(DRV_STRENGTH_SEL_MASK
|
|
<< DRV_STRENGTH_SEL_OFF);
|
|
pin_reg |= (arg & DRV_STRENGTH_SEL_MASK)
|
|
<< DRV_STRENGTH_SEL_OFF;
|
|
break;
|
|
|
|
default:
|
|
dev_err(&gpio_dev->pdev->dev,
|
|
"Invalid config param %04x\n", param);
|
|
ret = -ENOTSUPP;
|
|
}
|
|
|
|
writel(pin_reg, gpio_dev->base + pin*4);
|
|
}
|
|
raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_pinconf_group_get(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
unsigned long *config)
|
|
{
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
int ret;
|
|
|
|
ret = amd_get_group_pins(pctldev, group, &pins, &npins);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (amd_pinconf_get(pctldev, pins[0], config))
|
|
return -ENOTSUPP;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_pinconf_group_set(struct pinctrl_dev *pctldev,
|
|
unsigned group, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
int i, ret;
|
|
|
|
ret = amd_get_group_pins(pctldev, group, &pins, &npins);
|
|
if (ret)
|
|
return ret;
|
|
for (i = 0; i < npins; i++) {
|
|
if (amd_pinconf_set(pctldev, pins[i], configs, num_configs))
|
|
return -ENOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct pinconf_ops amd_pinconf_ops = {
|
|
.pin_config_get = amd_pinconf_get,
|
|
.pin_config_set = amd_pinconf_set,
|
|
.pin_config_group_get = amd_pinconf_group_get,
|
|
.pin_config_group_set = amd_pinconf_group_set,
|
|
};
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static bool amd_gpio_should_save(struct amd_gpio *gpio_dev, unsigned int pin)
|
|
{
|
|
const struct pin_desc *pd = pin_desc_get(gpio_dev->pctrl, pin);
|
|
|
|
if (!pd)
|
|
return false;
|
|
|
|
/*
|
|
* Only restore the pin if it is actually in use by the kernel (or
|
|
* by userspace).
|
|
*/
|
|
if (pd->mux_owner || pd->gpio_owner ||
|
|
gpiochip_line_is_irq(&gpio_dev->gc, pin))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int amd_gpio_suspend(struct device *dev)
|
|
{
|
|
struct amd_gpio *gpio_dev = dev_get_drvdata(dev);
|
|
struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
|
|
int i;
|
|
|
|
for (i = 0; i < desc->npins; i++) {
|
|
int pin = desc->pins[i].number;
|
|
|
|
if (!amd_gpio_should_save(gpio_dev, pin))
|
|
continue;
|
|
|
|
gpio_dev->saved_regs[i] = readl(gpio_dev->base + pin*4);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int amd_gpio_resume(struct device *dev)
|
|
{
|
|
struct amd_gpio *gpio_dev = dev_get_drvdata(dev);
|
|
struct pinctrl_desc *desc = gpio_dev->pctrl->desc;
|
|
int i;
|
|
|
|
for (i = 0; i < desc->npins; i++) {
|
|
int pin = desc->pins[i].number;
|
|
|
|
if (!amd_gpio_should_save(gpio_dev, pin))
|
|
continue;
|
|
|
|
writel(gpio_dev->saved_regs[i], gpio_dev->base + pin*4);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops amd_gpio_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(amd_gpio_suspend,
|
|
amd_gpio_resume)
|
|
};
|
|
#endif
|
|
|
|
static struct pinctrl_desc amd_pinctrl_desc = {
|
|
.pins = kerncz_pins,
|
|
.npins = ARRAY_SIZE(kerncz_pins),
|
|
.pctlops = &amd_pinctrl_ops,
|
|
.confops = &amd_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int amd_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
int irq_base;
|
|
struct resource *res;
|
|
struct amd_gpio *gpio_dev;
|
|
struct gpio_irq_chip *girq;
|
|
|
|
gpio_dev = devm_kzalloc(&pdev->dev,
|
|
sizeof(struct amd_gpio), GFP_KERNEL);
|
|
if (!gpio_dev)
|
|
return -ENOMEM;
|
|
|
|
raw_spin_lock_init(&gpio_dev->lock);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev, "Failed to get gpio io resource.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
gpio_dev->base = devm_ioremap(&pdev->dev, res->start,
|
|
resource_size(res));
|
|
if (!gpio_dev->base)
|
|
return -ENOMEM;
|
|
|
|
irq_base = platform_get_irq(pdev, 0);
|
|
if (irq_base < 0)
|
|
return irq_base;
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins,
|
|
sizeof(*gpio_dev->saved_regs),
|
|
GFP_KERNEL);
|
|
if (!gpio_dev->saved_regs)
|
|
return -ENOMEM;
|
|
#endif
|
|
|
|
gpio_dev->pdev = pdev;
|
|
gpio_dev->gc.get_direction = amd_gpio_get_direction;
|
|
gpio_dev->gc.direction_input = amd_gpio_direction_input;
|
|
gpio_dev->gc.direction_output = amd_gpio_direction_output;
|
|
gpio_dev->gc.get = amd_gpio_get_value;
|
|
gpio_dev->gc.set = amd_gpio_set_value;
|
|
gpio_dev->gc.set_config = amd_gpio_set_config;
|
|
gpio_dev->gc.dbg_show = amd_gpio_dbg_show;
|
|
|
|
gpio_dev->gc.base = -1;
|
|
gpio_dev->gc.label = pdev->name;
|
|
gpio_dev->gc.owner = THIS_MODULE;
|
|
gpio_dev->gc.parent = &pdev->dev;
|
|
gpio_dev->gc.ngpio = resource_size(res) / 4;
|
|
#if defined(CONFIG_OF_GPIO)
|
|
gpio_dev->gc.of_node = pdev->dev.of_node;
|
|
#endif
|
|
|
|
gpio_dev->hwbank_num = gpio_dev->gc.ngpio / 64;
|
|
gpio_dev->groups = kerncz_groups;
|
|
gpio_dev->ngroups = ARRAY_SIZE(kerncz_groups);
|
|
|
|
amd_pinctrl_desc.name = dev_name(&pdev->dev);
|
|
gpio_dev->pctrl = devm_pinctrl_register(&pdev->dev, &amd_pinctrl_desc,
|
|
gpio_dev);
|
|
if (IS_ERR(gpio_dev->pctrl)) {
|
|
dev_err(&pdev->dev, "Couldn't register pinctrl driver\n");
|
|
return PTR_ERR(gpio_dev->pctrl);
|
|
}
|
|
|
|
girq = &gpio_dev->gc.irq;
|
|
girq->chip = &amd_gpio_irqchip;
|
|
/* This will let us handle the parent IRQ in the driver */
|
|
girq->parent_handler = NULL;
|
|
girq->num_parents = 0;
|
|
girq->parents = NULL;
|
|
girq->default_type = IRQ_TYPE_NONE;
|
|
girq->handler = handle_simple_irq;
|
|
|
|
ret = gpiochip_add_data(&gpio_dev->gc, gpio_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = gpiochip_add_pin_range(&gpio_dev->gc, dev_name(&pdev->dev),
|
|
0, 0, gpio_dev->gc.ngpio);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to add pin range\n");
|
|
goto out2;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler,
|
|
IRQF_SHARED, KBUILD_MODNAME, gpio_dev);
|
|
if (ret)
|
|
goto out2;
|
|
|
|
platform_set_drvdata(pdev, gpio_dev);
|
|
|
|
dev_dbg(&pdev->dev, "amd gpio driver loaded\n");
|
|
return ret;
|
|
|
|
out2:
|
|
gpiochip_remove(&gpio_dev->gc);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int amd_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
struct amd_gpio *gpio_dev;
|
|
|
|
gpio_dev = platform_get_drvdata(pdev);
|
|
|
|
gpiochip_remove(&gpio_dev->gc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id amd_gpio_acpi_match[] = {
|
|
{ "AMD0030", 0 },
|
|
{ "AMDI0030", 0},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, amd_gpio_acpi_match);
|
|
#endif
|
|
|
|
static struct platform_driver amd_gpio_driver = {
|
|
.driver = {
|
|
.name = "amd_gpio",
|
|
.acpi_match_table = ACPI_PTR(amd_gpio_acpi_match),
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.pm = &amd_gpio_pm_ops,
|
|
#endif
|
|
},
|
|
.probe = amd_gpio_probe,
|
|
.remove = amd_gpio_remove,
|
|
};
|
|
|
|
module_platform_driver(amd_gpio_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_AUTHOR("Ken Xue <Ken.Xue@amd.com>, Jeff Wu <Jeff.Wu@amd.com>");
|
|
MODULE_DESCRIPTION("AMD GPIO pinctrl driver");
|