2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/arch/ppc64/kernel/kprobes.c
Ananth N Mavinakayanahalli 66ff2d0691 [PATCH] Kprobes: rearrange preempt_disable/enable() calls
The following set of patches are aimed at improving kprobes scalability.  We
currently serialize kprobe registration, unregistration and handler execution
using a single spinlock - kprobe_lock.

With these changes, kprobe handlers can run without any locks held.  It also
allows for simultaneous kprobe handler executions on different processors as
we now track kprobe execution on a per processor basis.  It is now necessary
that the handlers be re-entrant since handlers can run concurrently on
multiple processors.

All changes have been tested on i386, ia64, ppc64 and x86_64, while sparc64
has been compile tested only.

The patches can be viewed as 3 logical chunks:

patch 1: 	Reorder preempt_(dis/en)able calls
patches 2-7: 	Introduce per_cpu data areas to track kprobe execution
patches 8-9: 	Use RCU to synchronize kprobe (un)registration and handler
		execution.

Thanks to Maneesh Soni, James Keniston and Anil Keshavamurthy for their
review and suggestions. Thanks again to Anil, Hien Nguyen and Kevin Stafford
for testing the patches.

This patch:

Reorder preempt_disable/enable() calls in arch kprobes files in preparation to
introduce locking changes.  No functional changes introduced by this patch.

Signed-off-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com>
Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 07:53:45 -08:00

453 lines
12 KiB
C

/*
* Kernel Probes (KProbes)
* arch/ppc64/kernel/kprobes.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2002, 2004
*
* 2002-Oct Created by Vamsi Krishna S <vamsi_krishna@in.ibm.com> Kernel
* Probes initial implementation ( includes contributions from
* Rusty Russell).
* 2004-July Suparna Bhattacharya <suparna@in.ibm.com> added jumper probes
* interface to access function arguments.
* 2004-Nov Ananth N Mavinakayanahalli <ananth@in.ibm.com> kprobes port
* for PPC64
*/
#include <linux/config.h>
#include <linux/kprobes.h>
#include <linux/ptrace.h>
#include <linux/spinlock.h>
#include <linux/preempt.h>
#include <asm/cacheflush.h>
#include <asm/kdebug.h>
#include <asm/sstep.h>
static DECLARE_MUTEX(kprobe_mutex);
static struct kprobe *current_kprobe;
static unsigned long kprobe_status, kprobe_saved_msr;
static struct kprobe *kprobe_prev;
static unsigned long kprobe_status_prev, kprobe_saved_msr_prev;
static struct pt_regs jprobe_saved_regs;
int __kprobes arch_prepare_kprobe(struct kprobe *p)
{
int ret = 0;
kprobe_opcode_t insn = *p->addr;
if ((unsigned long)p->addr & 0x03) {
printk("Attempt to register kprobe at an unaligned address\n");
ret = -EINVAL;
} else if (IS_MTMSRD(insn) || IS_RFID(insn)) {
printk("Cannot register a kprobe on rfid or mtmsrd\n");
ret = -EINVAL;
}
/* insn must be on a special executable page on ppc64 */
if (!ret) {
down(&kprobe_mutex);
p->ainsn.insn = get_insn_slot();
up(&kprobe_mutex);
if (!p->ainsn.insn)
ret = -ENOMEM;
}
return ret;
}
void __kprobes arch_copy_kprobe(struct kprobe *p)
{
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
p->opcode = *p->addr;
}
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
*p->addr = BREAKPOINT_INSTRUCTION;
flush_icache_range((unsigned long) p->addr,
(unsigned long) p->addr + sizeof(kprobe_opcode_t));
}
void __kprobes arch_disarm_kprobe(struct kprobe *p)
{
*p->addr = p->opcode;
flush_icache_range((unsigned long) p->addr,
(unsigned long) p->addr + sizeof(kprobe_opcode_t));
}
void __kprobes arch_remove_kprobe(struct kprobe *p)
{
down(&kprobe_mutex);
free_insn_slot(p->ainsn.insn);
up(&kprobe_mutex);
}
static inline void prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
{
kprobe_opcode_t insn = *p->ainsn.insn;
regs->msr |= MSR_SE;
/* single step inline if it is a trap variant */
if (is_trap(insn))
regs->nip = (unsigned long)p->addr;
else
regs->nip = (unsigned long)p->ainsn.insn;
}
static inline void save_previous_kprobe(void)
{
kprobe_prev = current_kprobe;
kprobe_status_prev = kprobe_status;
kprobe_saved_msr_prev = kprobe_saved_msr;
}
static inline void restore_previous_kprobe(void)
{
current_kprobe = kprobe_prev;
kprobe_status = kprobe_status_prev;
kprobe_saved_msr = kprobe_saved_msr_prev;
}
void __kprobes arch_prepare_kretprobe(struct kretprobe *rp,
struct pt_regs *regs)
{
struct kretprobe_instance *ri;
if ((ri = get_free_rp_inst(rp)) != NULL) {
ri->rp = rp;
ri->task = current;
ri->ret_addr = (kprobe_opcode_t *)regs->link;
/* Replace the return addr with trampoline addr */
regs->link = (unsigned long)kretprobe_trampoline;
add_rp_inst(ri);
} else {
rp->nmissed++;
}
}
static inline int kprobe_handler(struct pt_regs *regs)
{
struct kprobe *p;
int ret = 0;
unsigned int *addr = (unsigned int *)regs->nip;
/* Check we're not actually recursing */
if (kprobe_running()) {
/* We *are* holding lock here, so this is safe.
Disarm the probe we just hit, and ignore it. */
p = get_kprobe(addr);
if (p) {
kprobe_opcode_t insn = *p->ainsn.insn;
if (kprobe_status == KPROBE_HIT_SS &&
is_trap(insn)) {
regs->msr &= ~MSR_SE;
regs->msr |= kprobe_saved_msr;
unlock_kprobes();
goto no_kprobe;
}
/* We have reentered the kprobe_handler(), since
* another probe was hit while within the handler.
* We here save the original kprobes variables and
* just single step on the instruction of the new probe
* without calling any user handlers.
*/
save_previous_kprobe();
current_kprobe = p;
kprobe_saved_msr = regs->msr;
p->nmissed++;
prepare_singlestep(p, regs);
kprobe_status = KPROBE_REENTER;
return 1;
} else {
p = current_kprobe;
if (p->break_handler && p->break_handler(p, regs)) {
goto ss_probe;
}
}
/* If it's not ours, can't be delete race, (we hold lock). */
goto no_kprobe;
}
lock_kprobes();
p = get_kprobe(addr);
if (!p) {
unlock_kprobes();
if (*addr != BREAKPOINT_INSTRUCTION) {
/*
* PowerPC has multiple variants of the "trap"
* instruction. If the current instruction is a
* trap variant, it could belong to someone else
*/
kprobe_opcode_t cur_insn = *addr;
if (is_trap(cur_insn))
goto no_kprobe;
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
*/
ret = 1;
}
/* Not one of ours: let kernel handle it */
goto no_kprobe;
}
/*
* This preempt_disable() matches the preempt_enable_no_resched()
* in post_kprobe_handler().
*/
preempt_disable();
kprobe_status = KPROBE_HIT_ACTIVE;
current_kprobe = p;
kprobe_saved_msr = regs->msr;
if (p->pre_handler && p->pre_handler(p, regs))
/* handler has already set things up, so skip ss setup */
return 1;
ss_probe:
prepare_singlestep(p, regs);
kprobe_status = KPROBE_HIT_SS;
return 1;
no_kprobe:
return ret;
}
/*
* Function return probe trampoline:
* - init_kprobes() establishes a probepoint here
* - When the probed function returns, this probe
* causes the handlers to fire
*/
void kretprobe_trampoline_holder(void)
{
asm volatile(".global kretprobe_trampoline\n"
"kretprobe_trampoline:\n"
"nop\n");
}
/*
* Called when the probe at kretprobe trampoline is hit
*/
int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
{
struct kretprobe_instance *ri = NULL;
struct hlist_head *head;
struct hlist_node *node, *tmp;
unsigned long orig_ret_address = 0;
unsigned long trampoline_address =(unsigned long)&kretprobe_trampoline;
head = kretprobe_inst_table_head(current);
/*
* It is possible to have multiple instances associated with a given
* task either because an multiple functions in the call path
* have a return probe installed on them, and/or more then one return
* return probe was registered for a target function.
*
* We can handle this because:
* - instances are always inserted at the head of the list
* - when multiple return probes are registered for the same
* function, the first instance's ret_addr will point to the
* real return address, and all the rest will point to
* kretprobe_trampoline
*/
hlist_for_each_entry_safe(ri, node, tmp, head, hlist) {
if (ri->task != current)
/* another task is sharing our hash bucket */
continue;
if (ri->rp && ri->rp->handler)
ri->rp->handler(ri, regs);
orig_ret_address = (unsigned long)ri->ret_addr;
recycle_rp_inst(ri);
if (orig_ret_address != trampoline_address)
/*
* This is the real return address. Any other
* instances associated with this task are for
* other calls deeper on the call stack
*/
break;
}
BUG_ON(!orig_ret_address || (orig_ret_address == trampoline_address));
regs->nip = orig_ret_address;
unlock_kprobes();
preempt_enable_no_resched();
/*
* By returning a non-zero value, we are telling
* kprobe_handler() that we have handled unlocking
* and re-enabling preemption.
*/
return 1;
}
/*
* Called after single-stepping. p->addr is the address of the
* instruction whose first byte has been replaced by the "breakpoint"
* instruction. To avoid the SMP problems that can occur when we
* temporarily put back the original opcode to single-step, we
* single-stepped a copy of the instruction. The address of this
* copy is p->ainsn.insn.
*/
static void __kprobes resume_execution(struct kprobe *p, struct pt_regs *regs)
{
int ret;
unsigned int insn = *p->ainsn.insn;
regs->nip = (unsigned long)p->addr;
ret = emulate_step(regs, insn);
if (ret == 0)
regs->nip = (unsigned long)p->addr + 4;
}
static inline int post_kprobe_handler(struct pt_regs *regs)
{
if (!kprobe_running())
return 0;
if ((kprobe_status != KPROBE_REENTER) && current_kprobe->post_handler) {
kprobe_status = KPROBE_HIT_SSDONE;
current_kprobe->post_handler(current_kprobe, regs, 0);
}
resume_execution(current_kprobe, regs);
regs->msr |= kprobe_saved_msr;
/*Restore back the original saved kprobes variables and continue. */
if (kprobe_status == KPROBE_REENTER) {
restore_previous_kprobe();
goto out;
}
unlock_kprobes();
out:
preempt_enable_no_resched();
/*
* if somebody else is singlestepping across a probe point, msr
* will have SE set, in which case, continue the remaining processing
* of do_debug, as if this is not a probe hit.
*/
if (regs->msr & MSR_SE)
return 0;
return 1;
}
/* Interrupts disabled, kprobe_lock held. */
static inline int kprobe_fault_handler(struct pt_regs *regs, int trapnr)
{
if (current_kprobe->fault_handler
&& current_kprobe->fault_handler(current_kprobe, regs, trapnr))
return 1;
if (kprobe_status & KPROBE_HIT_SS) {
resume_execution(current_kprobe, regs);
regs->msr &= ~MSR_SE;
regs->msr |= kprobe_saved_msr;
unlock_kprobes();
preempt_enable_no_resched();
}
return 0;
}
/*
* Wrapper routine to for handling exceptions.
*/
int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
struct die_args *args = (struct die_args *)data;
int ret = NOTIFY_DONE;
/*
* Interrupts are not disabled here. We need to disable
* preemption, because kprobe_running() uses smp_processor_id().
*/
preempt_disable();
switch (val) {
case DIE_BPT:
if (kprobe_handler(args->regs))
ret = NOTIFY_STOP;
break;
case DIE_SSTEP:
if (post_kprobe_handler(args->regs))
ret = NOTIFY_STOP;
break;
case DIE_PAGE_FAULT:
if (kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
break;
default:
break;
}
preempt_enable_no_resched();
return ret;
}
int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct jprobe *jp = container_of(p, struct jprobe, kp);
memcpy(&jprobe_saved_regs, regs, sizeof(struct pt_regs));
/* setup return addr to the jprobe handler routine */
regs->nip = (unsigned long)(((func_descr_t *)jp->entry)->entry);
regs->gpr[2] = (unsigned long)(((func_descr_t *)jp->entry)->toc);
return 1;
}
void __kprobes jprobe_return(void)
{
asm volatile("trap" ::: "memory");
}
void __kprobes jprobe_return_end(void)
{
};
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
/*
* FIXME - we should ideally be validating that we got here 'cos
* of the "trap" in jprobe_return() above, before restoring the
* saved regs...
*/
memcpy(regs, &jprobe_saved_regs, sizeof(struct pt_regs));
return 1;
}
static struct kprobe trampoline_p = {
.addr = (kprobe_opcode_t *) &kretprobe_trampoline,
.pre_handler = trampoline_probe_handler
};
int __init arch_init_kprobes(void)
{
return register_kprobe(&trampoline_p);
}