mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
89dafa20f3
Tested with Marvell 88se9125, attached with one port mulitplier(5 ports)
and one disk, we will get following boot log messages if using current
code:
ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata8.15: Port Multiplier 1.2, 0x1b4b:0x9715 r160, 5 ports, feat 0x1/0x1f
ahci 0000:03:00.0: FBS is enabled
ata8.00: hard resetting link
ata8.00: SATA link down (SStatus 0 SControl 330)
ata8.01: hard resetting link
ata8.01: SATA link down (SStatus 0 SControl 330)
ata8.02: hard resetting link
ata8.02: SATA link down (SStatus 0 SControl 330)
ata8.03: hard resetting link
ata8.03: SATA link up 6.0 Gbps (SStatus 133 SControl 133)
ata8.04: hard resetting link
ata8.04: failed to resume link (SControl 133)
ata8.04: failed to read SCR 0 (Emask=0x40)
ata8.04: failed to read SCR 0 (Emask=0x40)
ata8.04: failed to read SCR 1 (Emask=0x40)
ata8.04: failed to read SCR 0 (Emask=0x40)
ata8.03: native sectors (2) is smaller than sectors (976773168)
ata8.03: ATA-8: ST3500413AS, JC4B, max UDMA/133
ata8.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata8.03: configured for UDMA/133
ata8.04: failed to IDENTIFY (I/O error, err_mask=0x100)
ata8.15: hard resetting link
ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
ata8.15: PMP revalidation failed (errno=-19)
ata8.15: hard resetting link
ata8.15: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
ata8.15: PMP revalidation failed (errno=-19)
ata8.15: limiting SATA link speed to 3.0 Gbps
ata8.15: hard resetting link
ata8.15: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata8.15: Port Multiplier vendor mismatch '0x1b4b' != '0x133'
ata8.15: PMP revalidation failed (errno=-19)
ata8.15: failed to recover PMP after 5 tries, giving up
ata8.15: Port Multiplier detaching
ata8.03: disabled
ata8.00: disabled
ata8: EH complete
The reason is that current detection code doesn't follow AHCI spec:
First,the port multiplier detection process look like this:
ahci_hardreset(link, class, deadline)
if (class == ATA_DEV_PMP) {
sata_pmp_attach(dev) /* will enable FBS */
sata_pmp_init_links(ap, nr_ports);
ata_for_each_link(link, ap, EDGE) {
sata_std_hardreset(link, class, deadline);
if (link_is_online) /* do soft reset */
ahci_softreset(link, class, deadline);
}
}
But, according to chapter 9.3.9 in AHCI spec: Prior to issuing software
reset, software shall clear PxCMD.ST to '0' and then clear PxFBS.EN to
'0'.
The patch test ok with kernel 3.11.1.
tj: Patch white space contaminated, applied manually with trivial
updates.
Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
|
||
|---|---|---|
| .. | ||
| acard-ahci.c | ||
| ahci_imx.c | ||
| ahci_platform.c | ||
| ahci.c | ||
| ahci.h | ||
| ata_generic.c | ||
| ata_piix.c | ||
| Kconfig | ||
| libahci.c | ||
| libata-acpi.c | ||
| libata-core.c | ||
| libata-eh.c | ||
| libata-pmp.c | ||
| libata-scsi.c | ||
| libata-sff.c | ||
| libata-transport.c | ||
| libata-transport.h | ||
| libata-zpodd.c | ||
| libata.h | ||
| Makefile | ||
| pata_acpi.c | ||
| pata_ali.c | ||
| pata_amd.c | ||
| pata_arasan_cf.c | ||
| pata_artop.c | ||
| pata_at32.c | ||
| pata_at91.c | ||
| pata_atiixp.c | ||
| pata_atp867x.c | ||
| pata_bf54x.c | ||
| pata_cmd64x.c | ||
| pata_cmd640.c | ||
| pata_cs5520.c | ||
| pata_cs5530.c | ||
| pata_cs5535.c | ||
| pata_cs5536.c | ||
| pata_cypress.c | ||
| pata_efar.c | ||
| pata_ep93xx.c | ||
| pata_hpt3x2n.c | ||
| pata_hpt3x3.c | ||
| pata_hpt37x.c | ||
| pata_hpt366.c | ||
| pata_icside.c | ||
| pata_imx.c | ||
| pata_isapnp.c | ||
| pata_it821x.c | ||
| pata_it8213.c | ||
| pata_ixp4xx_cf.c | ||
| pata_jmicron.c | ||
| pata_legacy.c | ||
| pata_macio.c | ||
| pata_marvell.c | ||
| pata_mpc52xx.c | ||
| pata_mpiix.c | ||
| pata_netcell.c | ||
| pata_ninja32.c | ||
| pata_ns87410.c | ||
| pata_ns87415.c | ||
| pata_octeon_cf.c | ||
| pata_of_platform.c | ||
| pata_oldpiix.c | ||
| pata_opti.c | ||
| pata_optidma.c | ||
| pata_palmld.c | ||
| pata_pcmcia.c | ||
| pata_pdc202xx_old.c | ||
| pata_pdc2027x.c | ||
| pata_piccolo.c | ||
| pata_platform.c | ||
| pata_pxa.c | ||
| pata_radisys.c | ||
| pata_rb532_cf.c | ||
| pata_rdc.c | ||
| pata_rz1000.c | ||
| pata_samsung_cf.c | ||
| pata_sc1200.c | ||
| pata_scc.c | ||
| pata_sch.c | ||
| pata_serverworks.c | ||
| pata_sil680.c | ||
| pata_sis.c | ||
| pata_sl82c105.c | ||
| pata_triflex.c | ||
| pata_via.c | ||
| pdc_adma.c | ||
| sata_dwc_460ex.c | ||
| sata_fsl.c | ||
| sata_highbank.c | ||
| sata_inic162x.c | ||
| sata_mv.c | ||
| sata_nv.c | ||
| sata_promise.c | ||
| sata_promise.h | ||
| sata_qstor.c | ||
| sata_rcar.c | ||
| sata_sil24.c | ||
| sata_sil.c | ||
| sata_sis.c | ||
| sata_svw.c | ||
| sata_sx4.c | ||
| sata_uli.c | ||
| sata_via.c | ||
| sata_vsc.c | ||
| sis.h | ||