Yangtao Li a1158e36f8 pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler ... It is found on many allwinner soc that there is a low probability that the interrupt status cannot be read in sunxi_pinctrl_irq_handler. This will cause the interrupt status of a gpio bank to always be active on gic, preventing gic from responding to other spi interrupts correctly. So we should call the chained_irq_* each time enter sunxi_pinctrl_irq_handler(). Signed-off-by: Yangtao Li <frank@allwinnertech.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/85263ce8b058e80cea25c6ad6383eb256ce96cc8.1604988979.git.frank@allwinnertech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>		2020-11-24 09:41:29 +01:00
..
Kconfig	pinctrl: sunxi: add support for the Allwinner A100 pin controller	2020-09-12 12:35:42 +02:00
Makefile	pinctrl: sunxi: add support for the Allwinner A100 pin controller	2020-09-12 12:35:42 +02:00
pinctrl-sun4i-a10.c	pinctrl: sunxi: fix a typo when merging A20 support to A10 driver	2017-12-28 15:06:01 +01:00
pinctrl-sun5i.c	pinctrl: sunxi: Disable strict mode for old pinctrl drivers	2017-10-31 09:45:00 +01:00
pinctrl-sun6i-a31-r.c	pinctrl: sunxi: Disable strict mode for old pinctrl drivers	2017-10-31 09:45:00 +01:00
pinctrl-sun6i-a31.c	pinctrl: sunxi: Disable strict mode for old pinctrl drivers	2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a23-r.c	pinctrl: sunxi: handle probe defferal	2020-04-16 10:23:02 +02:00
pinctrl-sun8i-a23.c	pinctrl: sunxi: Disable strict mode for old pinctrl drivers	2017-10-31 09:45:00 +01:00
pinctrl-sun8i-a33.c	pinctrl: sunxi: change irq_bank_base to irq_bank_map	2018-03-27 15:07:49 +02:00
pinctrl-sun8i-a83t-r.c	pinctrl: sunxi: Add support for A83T R_PIO	2017-06-09 11:20:32 +02:00
pinctrl-sun8i-a83t.c	pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11	2018-12-07 13:32:19 +01:00
pinctrl-sun8i-h3-r.c	pinctrl: sunxi: Disable strict mode for old pinctrl drivers	2017-10-31 09:45:00 +01:00
pinctrl-sun8i-h3.c	pinctrl: sunxi: Disable strict mode for old pinctrl drivers	2017-10-31 09:45:00 +01:00
pinctrl-sun8i-v3s.c	pinctrl: sunxi: v3s: introduce support for V3	2019-08-05 12:35:29 +02:00
pinctrl-sun9i-a80-r.c	pinctrl: sunxi: Prepare for alternative bias voltage setting methods	2019-04-23 12:29:21 +02:00
pinctrl-sun9i-a80.c	pinctrl: sunxi: Prepare for alternative bias voltage setting methods	2019-04-23 12:29:21 +02:00
pinctrl-sun50i-a64-r.c	pinctrl: sunxi: Add A64 R_PIO controller support	2017-03-14 14:42:24 +01:00
pinctrl-sun50i-a64.c	pinctrl: sunxi: a64: Rename function ts0 to ts	2018-12-07 13:29:28 +01:00
pinctrl-sun50i-a100-r.c	pinctrl: sunxi: add support for the Allwinner A100 pin controller	2020-09-12 12:35:42 +02:00
pinctrl-sun50i-a100.c	pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller	2020-11-24 09:40:03 +01:00
pinctrl-sun50i-h5.c	pinctrl: sunxi: sun50i-h5 use platform_irq_count	2020-01-07 09:55:33 +01:00
pinctrl-sun50i-h6-r.c	pinctrl: sunxi: add support for H6 R_PIO pin controller	2018-05-16 14:19:13 +02:00
pinctrl-sun50i-h6.c	pinctrl: sunxi: Support I/O bias voltage setting on H6	2019-04-23 12:31:42 +02:00
pinctrl-suniv-f1c100s.c	pinctrl: sunxi: add support for suniv F1C100s (newer F-series SoCs)	2018-11-25 13:49:10 +01:00
pinctrl-sunxi.c	pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler	2020-11-24 09:41:29 +01:00
pinctrl-sunxi.h	pinctrl: sunxi: v3s: introduce support for V3	2019-08-05 12:35:29 +02:00