mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
8de901150f
... and remove duplicate status defines. Signed-off-by: Nicolas Pitre <nico@cam.org> Index: linux-2.6/drivers/net/smc91x.c ===================================================================
1026 lines
32 KiB
C
1026 lines
32 KiB
C
/*------------------------------------------------------------------------
|
|
. smc91x.h - macros for SMSC's 91C9x/91C1xx single-chip Ethernet device.
|
|
.
|
|
. Copyright (C) 1996 by Erik Stahlman
|
|
. Copyright (C) 2001 Standard Microsystems Corporation
|
|
. Developed by Simple Network Magic Corporation
|
|
. Copyright (C) 2003 Monta Vista Software, Inc.
|
|
. Unified SMC91x driver by Nicolas Pitre
|
|
.
|
|
. This program is free software; you can redistribute it and/or modify
|
|
. it under the terms of the GNU General Public License as published by
|
|
. the Free Software Foundation; either version 2 of the License, or
|
|
. (at your option) any later version.
|
|
.
|
|
. This program is distributed in the hope that it will be useful,
|
|
. but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
. MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
. GNU General Public License for more details.
|
|
.
|
|
. You should have received a copy of the GNU General Public License
|
|
. along with this program; if not, write to the Free Software
|
|
. Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
.
|
|
. Information contained in this file was obtained from the LAN91C111
|
|
. manual from SMC. To get a copy, if you really want one, you can find
|
|
. information under www.smsc.com.
|
|
.
|
|
. Authors
|
|
. Erik Stahlman <erik@vt.edu>
|
|
. Daris A Nevil <dnevil@snmc.com>
|
|
. Nicolas Pitre <nico@cam.org>
|
|
.
|
|
---------------------------------------------------------------------------*/
|
|
#ifndef _SMC91X_H_
|
|
#define _SMC91X_H_
|
|
|
|
|
|
/*
|
|
* Define your architecture specific bus configuration parameters here.
|
|
*/
|
|
|
|
#if defined(CONFIG_ARCH_LUBBOCK)
|
|
|
|
/* We can only do 16-bit reads and writes in the static memory space. */
|
|
#define SMC_CAN_USE_8BIT 0
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
#define SMC_NOWAIT 1
|
|
|
|
/* The first two address lines aren't connected... */
|
|
#define SMC_IO_SHIFT 2
|
|
|
|
#define SMC_inw(a, r) readw((a) + (r))
|
|
#define SMC_outw(v, a, r) writew(v, (a) + (r))
|
|
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
|
|
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
|
|
|
|
#elif defined(CONFIG_REDWOOD_5) || defined(CONFIG_REDWOOD_6)
|
|
|
|
/* We can only do 16-bit reads and writes in the static memory space. */
|
|
#define SMC_CAN_USE_8BIT 0
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
#define SMC_NOWAIT 1
|
|
|
|
#define SMC_IO_SHIFT 0
|
|
|
|
#define SMC_inw(a, r) in_be16((volatile u16 *)((a) + (r)))
|
|
#define SMC_outw(v, a, r) out_be16((volatile u16 *)((a) + (r)), v)
|
|
#define SMC_insw(a, r, p, l) \
|
|
do { \
|
|
unsigned long __port = (a) + (r); \
|
|
u16 *__p = (u16 *)(p); \
|
|
int __l = (l); \
|
|
insw(__port, __p, __l); \
|
|
while (__l > 0) { \
|
|
*__p = swab16(*__p); \
|
|
__p++; \
|
|
__l--; \
|
|
} \
|
|
} while (0)
|
|
#define SMC_outsw(a, r, p, l) \
|
|
do { \
|
|
unsigned long __port = (a) + (r); \
|
|
u16 *__p = (u16 *)(p); \
|
|
int __l = (l); \
|
|
while (__l > 0) { \
|
|
/* Believe it or not, the swab isn't needed. */ \
|
|
outw( /* swab16 */ (*__p++), __port); \
|
|
__l--; \
|
|
} \
|
|
} while (0)
|
|
#define set_irq_type(irq, type)
|
|
|
|
#elif defined(CONFIG_SA1100_PLEB)
|
|
/* We can only do 16-bit reads and writes in the static memory space. */
|
|
#define SMC_CAN_USE_8BIT 1
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
#define SMC_IO_SHIFT 0
|
|
#define SMC_NOWAIT 1
|
|
|
|
#define SMC_inb(a, r) inb((a) + (r))
|
|
#define SMC_insb(a, r, p, l) insb((a) + (r), p, (l))
|
|
#define SMC_inw(a, r) inw((a) + (r))
|
|
#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
|
|
#define SMC_outb(v, a, r) outb(v, (a) + (r))
|
|
#define SMC_outsb(a, r, p, l) outsb((a) + (r), p, (l))
|
|
#define SMC_outw(v, a, r) outw(v, (a) + (r))
|
|
#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
|
|
|
|
#define set_irq_type(irq, type) do {} while (0)
|
|
|
|
#elif defined(CONFIG_SA1100_ASSABET)
|
|
|
|
#include <asm/arch/neponset.h>
|
|
|
|
/* We can only do 8-bit reads and writes in the static memory space. */
|
|
#define SMC_CAN_USE_8BIT 1
|
|
#define SMC_CAN_USE_16BIT 0
|
|
#define SMC_CAN_USE_32BIT 0
|
|
#define SMC_NOWAIT 1
|
|
|
|
/* The first two address lines aren't connected... */
|
|
#define SMC_IO_SHIFT 2
|
|
|
|
#define SMC_inb(a, r) readb((a) + (r))
|
|
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
|
|
#define SMC_insb(a, r, p, l) readsb((a) + (r), p, (l))
|
|
#define SMC_outsb(a, r, p, l) writesb((a) + (r), p, (l))
|
|
|
|
#elif defined(CONFIG_ARCH_INNOKOM) || \
|
|
defined(CONFIG_MACH_MAINSTONE) || \
|
|
defined(CONFIG_ARCH_PXA_IDP) || \
|
|
defined(CONFIG_ARCH_RAMSES)
|
|
|
|
#define SMC_CAN_USE_8BIT 1
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 1
|
|
#define SMC_IO_SHIFT 0
|
|
#define SMC_NOWAIT 1
|
|
#define SMC_USE_PXA_DMA 1
|
|
|
|
#define SMC_inb(a, r) readb((a) + (r))
|
|
#define SMC_inw(a, r) readw((a) + (r))
|
|
#define SMC_inl(a, r) readl((a) + (r))
|
|
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
|
|
#define SMC_outl(v, a, r) writel(v, (a) + (r))
|
|
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
|
|
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
|
|
|
|
/* We actually can't write halfwords properly if not word aligned */
|
|
static inline void
|
|
SMC_outw(u16 val, void __iomem *ioaddr, int reg)
|
|
{
|
|
if (reg & 2) {
|
|
unsigned int v = val << 16;
|
|
v |= readl(ioaddr + (reg & ~2)) & 0xffff;
|
|
writel(v, ioaddr + (reg & ~2));
|
|
} else {
|
|
writew(val, ioaddr + reg);
|
|
}
|
|
}
|
|
|
|
#elif defined(CONFIG_ARCH_OMAP)
|
|
|
|
/* We can only do 16-bit reads and writes in the static memory space. */
|
|
#define SMC_CAN_USE_8BIT 0
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
#define SMC_IO_SHIFT 0
|
|
#define SMC_NOWAIT 1
|
|
|
|
#define SMC_inb(a, r) readb((a) + (r))
|
|
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
|
|
#define SMC_inw(a, r) readw((a) + (r))
|
|
#define SMC_outw(v, a, r) writew(v, (a) + (r))
|
|
#define SMC_insw(a, r, p, l) readsw((a) + (r), p, l)
|
|
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
|
|
#define SMC_inl(a, r) readl((a) + (r))
|
|
#define SMC_outl(v, a, r) writel(v, (a) + (r))
|
|
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
|
|
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
|
|
|
|
#elif defined(CONFIG_SH_SH4202_MICRODEV)
|
|
|
|
#define SMC_CAN_USE_8BIT 0
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
|
|
#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
|
|
#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
|
|
#define SMC_inl(a, r) inl((a) + (r) - 0xa0000000)
|
|
#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
|
|
#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
|
|
#define SMC_outl(v, a, r) outl(v, (a) + (r) - 0xa0000000)
|
|
#define SMC_insl(a, r, p, l) insl((a) + (r) - 0xa0000000, p, l)
|
|
#define SMC_outsl(a, r, p, l) outsl((a) + (r) - 0xa0000000, p, l)
|
|
#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
|
|
#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
|
|
|
|
#define set_irq_type(irq, type) do {} while(0)
|
|
|
|
#elif defined(CONFIG_ISA)
|
|
|
|
#define SMC_CAN_USE_8BIT 1
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
|
|
#define SMC_inb(a, r) inb((a) + (r))
|
|
#define SMC_inw(a, r) inw((a) + (r))
|
|
#define SMC_outb(v, a, r) outb(v, (a) + (r))
|
|
#define SMC_outw(v, a, r) outw(v, (a) + (r))
|
|
#define SMC_insw(a, r, p, l) insw((a) + (r), p, l)
|
|
#define SMC_outsw(a, r, p, l) outsw((a) + (r), p, l)
|
|
|
|
#elif defined(CONFIG_M32R)
|
|
|
|
#define SMC_CAN_USE_8BIT 0
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
|
|
#define SMC_inb(a, r) inb((a) + (r) - 0xa0000000)
|
|
#define SMC_inw(a, r) inw((a) + (r) - 0xa0000000)
|
|
#define SMC_outb(v, a, r) outb(v, (a) + (r) - 0xa0000000)
|
|
#define SMC_outw(v, a, r) outw(v, (a) + (r) - 0xa0000000)
|
|
#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
|
|
#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
|
|
|
|
#define set_irq_type(irq, type) do {} while(0)
|
|
|
|
#define RPC_LSA_DEFAULT RPC_LED_TX_RX
|
|
#define RPC_LSB_DEFAULT RPC_LED_100_10
|
|
|
|
#elif defined(CONFIG_MACH_LPD7A400) || defined(CONFIG_MACH_LPD7A404)
|
|
|
|
/* The LPD7A40X_IOBARRIER is necessary to overcome a mismatch between
|
|
* the way that the CPU handles chip selects and the way that the SMC
|
|
* chip expects the chip select to operate. Refer to
|
|
* Documentation/arm/Sharp-LH/IOBarrier for details. The read from
|
|
* IOBARRIER is a byte as a least-common denominator of possible
|
|
* regions to use as the barrier. It would be wasteful to read 32
|
|
* bits from a byte oriented region.
|
|
*
|
|
* There is no explicit protection against interrupts intervening
|
|
* between the writew and the IOBARRIER. In SMC ISR there is a
|
|
* preamble that performs an IOBARRIER in the extremely unlikely event
|
|
* that the driver interrupts itself between a writew to the chip an
|
|
* the IOBARRIER that follows *and* the cache is large enough that the
|
|
* first off-chip access while handing the interrupt is to the SMC
|
|
* chip. Other devices in the same address space as the SMC chip must
|
|
* be aware of the potential for trouble and perform a similar
|
|
* IOBARRIER on entry to their ISR.
|
|
*/
|
|
|
|
#include <asm/arch/constants.h> /* IOBARRIER_VIRT */
|
|
|
|
#define SMC_CAN_USE_8BIT 0
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 0
|
|
#define SMC_NOWAIT 0
|
|
#define LPD7A40X_IOBARRIER readb (IOBARRIER_VIRT)
|
|
|
|
#define SMC_inw(a,r) readw ((void*) ((a) + (r)))
|
|
#define SMC_insw(a,r,p,l) readsw ((void*) ((a) + (r)), p, l)
|
|
#define SMC_outw(v,a,r) ({ writew ((v), (a) + (r)); LPD7A40X_IOBARRIER; })
|
|
|
|
static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
|
|
{
|
|
unsigned short* ps = (unsigned short*) p;
|
|
while (l-- > 0) {
|
|
writew (*ps++, a + r);
|
|
LPD7A40X_IOBARRIER;
|
|
}
|
|
}
|
|
|
|
#define SMC_INTERRUPT_PREAMBLE LPD7A40X_IOBARRIER
|
|
|
|
#define RPC_LSA_DEFAULT RPC_LED_TX_RX
|
|
#define RPC_LSB_DEFAULT RPC_LED_100_10
|
|
|
|
#else
|
|
|
|
#define SMC_CAN_USE_8BIT 1
|
|
#define SMC_CAN_USE_16BIT 1
|
|
#define SMC_CAN_USE_32BIT 1
|
|
#define SMC_NOWAIT 1
|
|
|
|
#define SMC_inb(a, r) readb((a) + (r))
|
|
#define SMC_inw(a, r) readw((a) + (r))
|
|
#define SMC_inl(a, r) readl((a) + (r))
|
|
#define SMC_outb(v, a, r) writeb(v, (a) + (r))
|
|
#define SMC_outw(v, a, r) writew(v, (a) + (r))
|
|
#define SMC_outl(v, a, r) writel(v, (a) + (r))
|
|
#define SMC_insl(a, r, p, l) readsl((a) + (r), p, l)
|
|
#define SMC_outsl(a, r, p, l) writesl((a) + (r), p, l)
|
|
|
|
#define RPC_LSA_DEFAULT RPC_LED_100_10
|
|
#define RPC_LSB_DEFAULT RPC_LED_TX_RX
|
|
|
|
#endif
|
|
|
|
|
|
#ifdef SMC_USE_PXA_DMA
|
|
/*
|
|
* Let's use the DMA engine on the XScale PXA2xx for RX packets. This is
|
|
* always happening in irq context so no need to worry about races. TX is
|
|
* different and probably not worth it for that reason, and not as critical
|
|
* as RX which can overrun memory and lose packets.
|
|
*/
|
|
#include <linux/dma-mapping.h>
|
|
#include <asm/dma.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
#ifdef SMC_insl
|
|
#undef SMC_insl
|
|
#define SMC_insl(a, r, p, l) \
|
|
smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l)
|
|
static inline void
|
|
smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
|
|
u_char *buf, int len)
|
|
{
|
|
dma_addr_t dmabuf;
|
|
|
|
/* fallback if no DMA available */
|
|
if (dma == (unsigned char)-1) {
|
|
readsl(ioaddr + reg, buf, len);
|
|
return;
|
|
}
|
|
|
|
/* 64 bit alignment is required for memory to memory DMA */
|
|
if ((long)buf & 4) {
|
|
*((u32 *)buf) = SMC_inl(ioaddr, reg);
|
|
buf += 4;
|
|
len--;
|
|
}
|
|
|
|
len *= 4;
|
|
dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
|
|
DCSR(dma) = DCSR_NODESC;
|
|
DTADR(dma) = dmabuf;
|
|
DSADR(dma) = physaddr + reg;
|
|
DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
|
|
DCMD_WIDTH4 | (DCMD_LENGTH & len));
|
|
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
|
|
while (!(DCSR(dma) & DCSR_STOPSTATE))
|
|
cpu_relax();
|
|
DCSR(dma) = 0;
|
|
dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
|
|
}
|
|
#endif
|
|
|
|
#ifdef SMC_insw
|
|
#undef SMC_insw
|
|
#define SMC_insw(a, r, p, l) \
|
|
smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l)
|
|
static inline void
|
|
smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma,
|
|
u_char *buf, int len)
|
|
{
|
|
dma_addr_t dmabuf;
|
|
|
|
/* fallback if no DMA available */
|
|
if (dma == (unsigned char)-1) {
|
|
readsw(ioaddr + reg, buf, len);
|
|
return;
|
|
}
|
|
|
|
/* 64 bit alignment is required for memory to memory DMA */
|
|
while ((long)buf & 6) {
|
|
*((u16 *)buf) = SMC_inw(ioaddr, reg);
|
|
buf += 2;
|
|
len--;
|
|
}
|
|
|
|
len *= 2;
|
|
dmabuf = dma_map_single(NULL, buf, len, DMA_FROM_DEVICE);
|
|
DCSR(dma) = DCSR_NODESC;
|
|
DTADR(dma) = dmabuf;
|
|
DSADR(dma) = physaddr + reg;
|
|
DCMD(dma) = (DCMD_INCTRGADDR | DCMD_BURST32 |
|
|
DCMD_WIDTH2 | (DCMD_LENGTH & len));
|
|
DCSR(dma) = DCSR_NODESC | DCSR_RUN;
|
|
while (!(DCSR(dma) & DCSR_STOPSTATE))
|
|
cpu_relax();
|
|
DCSR(dma) = 0;
|
|
dma_unmap_single(NULL, dmabuf, len, DMA_FROM_DEVICE);
|
|
}
|
|
#endif
|
|
|
|
static void
|
|
smc_pxa_dma_irq(int dma, void *dummy, struct pt_regs *regs)
|
|
{
|
|
DCSR(dma) = 0;
|
|
}
|
|
#endif /* SMC_USE_PXA_DMA */
|
|
|
|
|
|
/* Because of bank switching, the LAN91x uses only 16 I/O ports */
|
|
#ifndef SMC_IO_SHIFT
|
|
#define SMC_IO_SHIFT 0
|
|
#endif
|
|
#define SMC_IO_EXTENT (16 << SMC_IO_SHIFT)
|
|
#define SMC_DATA_EXTENT (4)
|
|
|
|
/*
|
|
. Bank Select Register:
|
|
.
|
|
. yyyy yyyy 0000 00xx
|
|
. xx = bank number
|
|
. yyyy yyyy = 0x33, for identification purposes.
|
|
*/
|
|
#define BANK_SELECT (14 << SMC_IO_SHIFT)
|
|
|
|
|
|
// Transmit Control Register
|
|
/* BANK 0 */
|
|
#define TCR_REG SMC_REG(0x0000, 0)
|
|
#define TCR_ENABLE 0x0001 // When 1 we can transmit
|
|
#define TCR_LOOP 0x0002 // Controls output pin LBK
|
|
#define TCR_FORCOL 0x0004 // When 1 will force a collision
|
|
#define TCR_PAD_EN 0x0080 // When 1 will pad tx frames < 64 bytes w/0
|
|
#define TCR_NOCRC 0x0100 // When 1 will not append CRC to tx frames
|
|
#define TCR_MON_CSN 0x0400 // When 1 tx monitors carrier
|
|
#define TCR_FDUPLX 0x0800 // When 1 enables full duplex operation
|
|
#define TCR_STP_SQET 0x1000 // When 1 stops tx if Signal Quality Error
|
|
#define TCR_EPH_LOOP 0x2000 // When 1 enables EPH block loopback
|
|
#define TCR_SWFDUP 0x8000 // When 1 enables Switched Full Duplex mode
|
|
|
|
#define TCR_CLEAR 0 /* do NOTHING */
|
|
/* the default settings for the TCR register : */
|
|
#define TCR_DEFAULT (TCR_ENABLE | TCR_PAD_EN)
|
|
|
|
|
|
// EPH Status Register
|
|
/* BANK 0 */
|
|
#define EPH_STATUS_REG SMC_REG(0x0002, 0)
|
|
#define ES_TX_SUC 0x0001 // Last TX was successful
|
|
#define ES_SNGL_COL 0x0002 // Single collision detected for last tx
|
|
#define ES_MUL_COL 0x0004 // Multiple collisions detected for last tx
|
|
#define ES_LTX_MULT 0x0008 // Last tx was a multicast
|
|
#define ES_16COL 0x0010 // 16 Collisions Reached
|
|
#define ES_SQET 0x0020 // Signal Quality Error Test
|
|
#define ES_LTXBRD 0x0040 // Last tx was a broadcast
|
|
#define ES_TXDEFR 0x0080 // Transmit Deferred
|
|
#define ES_LATCOL 0x0200 // Late collision detected on last tx
|
|
#define ES_LOSTCARR 0x0400 // Lost Carrier Sense
|
|
#define ES_EXC_DEF 0x0800 // Excessive Deferral
|
|
#define ES_CTR_ROL 0x1000 // Counter Roll Over indication
|
|
#define ES_LINK_OK 0x4000 // Driven by inverted value of nLNK pin
|
|
#define ES_TXUNRN 0x8000 // Tx Underrun
|
|
|
|
|
|
// Receive Control Register
|
|
/* BANK 0 */
|
|
#define RCR_REG SMC_REG(0x0004, 0)
|
|
#define RCR_RX_ABORT 0x0001 // Set if a rx frame was aborted
|
|
#define RCR_PRMS 0x0002 // Enable promiscuous mode
|
|
#define RCR_ALMUL 0x0004 // When set accepts all multicast frames
|
|
#define RCR_RXEN 0x0100 // IFF this is set, we can receive packets
|
|
#define RCR_STRIP_CRC 0x0200 // When set strips CRC from rx packets
|
|
#define RCR_ABORT_ENB 0x0200 // When set will abort rx on collision
|
|
#define RCR_FILT_CAR 0x0400 // When set filters leading 12 bit s of carrier
|
|
#define RCR_SOFTRST 0x8000 // resets the chip
|
|
|
|
/* the normal settings for the RCR register : */
|
|
#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN)
|
|
#define RCR_CLEAR 0x0 // set it to a base state
|
|
|
|
|
|
// Counter Register
|
|
/* BANK 0 */
|
|
#define COUNTER_REG SMC_REG(0x0006, 0)
|
|
|
|
|
|
// Memory Information Register
|
|
/* BANK 0 */
|
|
#define MIR_REG SMC_REG(0x0008, 0)
|
|
|
|
|
|
// Receive/Phy Control Register
|
|
/* BANK 0 */
|
|
#define RPC_REG SMC_REG(0x000A, 0)
|
|
#define RPC_SPEED 0x2000 // When 1 PHY is in 100Mbps mode.
|
|
#define RPC_DPLX 0x1000 // When 1 PHY is in Full-Duplex Mode
|
|
#define RPC_ANEG 0x0800 // When 1 PHY is in Auto-Negotiate Mode
|
|
#define RPC_LSXA_SHFT 5 // Bits to shift LS2A,LS1A,LS0A to lsb
|
|
#define RPC_LSXB_SHFT 2 // Bits to get LS2B,LS1B,LS0B to lsb
|
|
#define RPC_LED_100_10 (0x00) // LED = 100Mbps OR's with 10Mbps link detect
|
|
#define RPC_LED_RES (0x01) // LED = Reserved
|
|
#define RPC_LED_10 (0x02) // LED = 10Mbps link detect
|
|
#define RPC_LED_FD (0x03) // LED = Full Duplex Mode
|
|
#define RPC_LED_TX_RX (0x04) // LED = TX or RX packet occurred
|
|
#define RPC_LED_100 (0x05) // LED = 100Mbps link dectect
|
|
#define RPC_LED_TX (0x06) // LED = TX packet occurred
|
|
#define RPC_LED_RX (0x07) // LED = RX packet occurred
|
|
|
|
#ifndef RPC_LSA_DEFAULT
|
|
#define RPC_LSA_DEFAULT RPC_LED_100
|
|
#endif
|
|
#ifndef RPC_LSB_DEFAULT
|
|
#define RPC_LSB_DEFAULT RPC_LED_FD
|
|
#endif
|
|
|
|
#define RPC_DEFAULT (RPC_ANEG | (RPC_LSA_DEFAULT << RPC_LSXA_SHFT) | (RPC_LSB_DEFAULT << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX)
|
|
|
|
|
|
/* Bank 0 0x0C is reserved */
|
|
|
|
// Bank Select Register
|
|
/* All Banks */
|
|
#define BSR_REG 0x000E
|
|
|
|
|
|
// Configuration Reg
|
|
/* BANK 1 */
|
|
#define CONFIG_REG SMC_REG(0x0000, 1)
|
|
#define CONFIG_EXT_PHY 0x0200 // 1=external MII, 0=internal Phy
|
|
#define CONFIG_GPCNTRL 0x0400 // Inverse value drives pin nCNTRL
|
|
#define CONFIG_NO_WAIT 0x1000 // When 1 no extra wait states on ISA bus
|
|
#define CONFIG_EPH_POWER_EN 0x8000 // When 0 EPH is placed into low power mode.
|
|
|
|
// Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low
|
|
#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN)
|
|
|
|
|
|
// Base Address Register
|
|
/* BANK 1 */
|
|
#define BASE_REG SMC_REG(0x0002, 1)
|
|
|
|
|
|
// Individual Address Registers
|
|
/* BANK 1 */
|
|
#define ADDR0_REG SMC_REG(0x0004, 1)
|
|
#define ADDR1_REG SMC_REG(0x0006, 1)
|
|
#define ADDR2_REG SMC_REG(0x0008, 1)
|
|
|
|
|
|
// General Purpose Register
|
|
/* BANK 1 */
|
|
#define GP_REG SMC_REG(0x000A, 1)
|
|
|
|
|
|
// Control Register
|
|
/* BANK 1 */
|
|
#define CTL_REG SMC_REG(0x000C, 1)
|
|
#define CTL_RCV_BAD 0x4000 // When 1 bad CRC packets are received
|
|
#define CTL_AUTO_RELEASE 0x0800 // When 1 tx pages are released automatically
|
|
#define CTL_LE_ENABLE 0x0080 // When 1 enables Link Error interrupt
|
|
#define CTL_CR_ENABLE 0x0040 // When 1 enables Counter Rollover interrupt
|
|
#define CTL_TE_ENABLE 0x0020 // When 1 enables Transmit Error interrupt
|
|
#define CTL_EEPROM_SELECT 0x0004 // Controls EEPROM reload & store
|
|
#define CTL_RELOAD 0x0002 // When set reads EEPROM into registers
|
|
#define CTL_STORE 0x0001 // When set stores registers into EEPROM
|
|
|
|
|
|
// MMU Command Register
|
|
/* BANK 2 */
|
|
#define MMU_CMD_REG SMC_REG(0x0000, 2)
|
|
#define MC_BUSY 1 // When 1 the last release has not completed
|
|
#define MC_NOP (0<<5) // No Op
|
|
#define MC_ALLOC (1<<5) // OR with number of 256 byte packets
|
|
#define MC_RESET (2<<5) // Reset MMU to initial state
|
|
#define MC_REMOVE (3<<5) // Remove the current rx packet
|
|
#define MC_RELEASE (4<<5) // Remove and release the current rx packet
|
|
#define MC_FREEPKT (5<<5) // Release packet in PNR register
|
|
#define MC_ENQUEUE (6<<5) // Enqueue the packet for transmit
|
|
#define MC_RSTTXFIFO (7<<5) // Reset the TX FIFOs
|
|
|
|
|
|
// Packet Number Register
|
|
/* BANK 2 */
|
|
#define PN_REG SMC_REG(0x0002, 2)
|
|
|
|
|
|
// Allocation Result Register
|
|
/* BANK 2 */
|
|
#define AR_REG SMC_REG(0x0003, 2)
|
|
#define AR_FAILED 0x80 // Alocation Failed
|
|
|
|
|
|
// TX FIFO Ports Register
|
|
/* BANK 2 */
|
|
#define TXFIFO_REG SMC_REG(0x0004, 2)
|
|
#define TXFIFO_TEMPTY 0x80 // TX FIFO Empty
|
|
|
|
// RX FIFO Ports Register
|
|
/* BANK 2 */
|
|
#define RXFIFO_REG SMC_REG(0x0005, 2)
|
|
#define RXFIFO_REMPTY 0x80 // RX FIFO Empty
|
|
|
|
#define FIFO_REG SMC_REG(0x0004, 2)
|
|
|
|
// Pointer Register
|
|
/* BANK 2 */
|
|
#define PTR_REG SMC_REG(0x0006, 2)
|
|
#define PTR_RCV 0x8000 // 1=Receive area, 0=Transmit area
|
|
#define PTR_AUTOINC 0x4000 // Auto increment the pointer on each access
|
|
#define PTR_READ 0x2000 // When 1 the operation is a read
|
|
|
|
|
|
// Data Register
|
|
/* BANK 2 */
|
|
#define DATA_REG SMC_REG(0x0008, 2)
|
|
|
|
|
|
// Interrupt Status/Acknowledge Register
|
|
/* BANK 2 */
|
|
#define INT_REG SMC_REG(0x000C, 2)
|
|
|
|
|
|
// Interrupt Mask Register
|
|
/* BANK 2 */
|
|
#define IM_REG SMC_REG(0x000D, 2)
|
|
#define IM_MDINT 0x80 // PHY MI Register 18 Interrupt
|
|
#define IM_ERCV_INT 0x40 // Early Receive Interrupt
|
|
#define IM_EPH_INT 0x20 // Set by Ethernet Protocol Handler section
|
|
#define IM_RX_OVRN_INT 0x10 // Set by Receiver Overruns
|
|
#define IM_ALLOC_INT 0x08 // Set when allocation request is completed
|
|
#define IM_TX_EMPTY_INT 0x04 // Set if the TX FIFO goes empty
|
|
#define IM_TX_INT 0x02 // Transmit Interrupt
|
|
#define IM_RCV_INT 0x01 // Receive Interrupt
|
|
|
|
|
|
// Multicast Table Registers
|
|
/* BANK 3 */
|
|
#define MCAST_REG1 SMC_REG(0x0000, 3)
|
|
#define MCAST_REG2 SMC_REG(0x0002, 3)
|
|
#define MCAST_REG3 SMC_REG(0x0004, 3)
|
|
#define MCAST_REG4 SMC_REG(0x0006, 3)
|
|
|
|
|
|
// Management Interface Register (MII)
|
|
/* BANK 3 */
|
|
#define MII_REG SMC_REG(0x0008, 3)
|
|
#define MII_MSK_CRS100 0x4000 // Disables CRS100 detection during tx half dup
|
|
#define MII_MDOE 0x0008 // MII Output Enable
|
|
#define MII_MCLK 0x0004 // MII Clock, pin MDCLK
|
|
#define MII_MDI 0x0002 // MII Input, pin MDI
|
|
#define MII_MDO 0x0001 // MII Output, pin MDO
|
|
|
|
|
|
// Revision Register
|
|
/* BANK 3 */
|
|
/* ( hi: chip id low: rev # ) */
|
|
#define REV_REG SMC_REG(0x000A, 3)
|
|
|
|
|
|
// Early RCV Register
|
|
/* BANK 3 */
|
|
/* this is NOT on SMC9192 */
|
|
#define ERCV_REG SMC_REG(0x000C, 3)
|
|
#define ERCV_RCV_DISCRD 0x0080 // When 1 discards a packet being received
|
|
#define ERCV_THRESHOLD 0x001F // ERCV Threshold Mask
|
|
|
|
|
|
// External Register
|
|
/* BANK 7 */
|
|
#define EXT_REG SMC_REG(0x0000, 7)
|
|
|
|
|
|
#define CHIP_9192 3
|
|
#define CHIP_9194 4
|
|
#define CHIP_9195 5
|
|
#define CHIP_9196 6
|
|
#define CHIP_91100 7
|
|
#define CHIP_91100FD 8
|
|
#define CHIP_91111FD 9
|
|
|
|
static const char * chip_ids[ 16 ] = {
|
|
NULL, NULL, NULL,
|
|
/* 3 */ "SMC91C90/91C92",
|
|
/* 4 */ "SMC91C94",
|
|
/* 5 */ "SMC91C95",
|
|
/* 6 */ "SMC91C96",
|
|
/* 7 */ "SMC91C100",
|
|
/* 8 */ "SMC91C100FD",
|
|
/* 9 */ "SMC91C11xFD",
|
|
NULL, NULL, NULL,
|
|
NULL, NULL, NULL};
|
|
|
|
|
|
/*
|
|
. Receive status bits
|
|
*/
|
|
#define RS_ALGNERR 0x8000
|
|
#define RS_BRODCAST 0x4000
|
|
#define RS_BADCRC 0x2000
|
|
#define RS_ODDFRAME 0x1000
|
|
#define RS_TOOLONG 0x0800
|
|
#define RS_TOOSHORT 0x0400
|
|
#define RS_MULTICAST 0x0001
|
|
#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT)
|
|
|
|
|
|
/*
|
|
* PHY IDs
|
|
* LAN83C183 == LAN91C111 Internal PHY
|
|
*/
|
|
#define PHY_LAN83C183 0x0016f840
|
|
#define PHY_LAN83C180 0x02821c50
|
|
|
|
/*
|
|
* PHY Register Addresses (LAN91C111 Internal PHY)
|
|
*
|
|
* Generic PHY registers can be found in <linux/mii.h>
|
|
*
|
|
* These phy registers are specific to our on-board phy.
|
|
*/
|
|
|
|
// PHY Configuration Register 1
|
|
#define PHY_CFG1_REG 0x10
|
|
#define PHY_CFG1_LNKDIS 0x8000 // 1=Rx Link Detect Function disabled
|
|
#define PHY_CFG1_XMTDIS 0x4000 // 1=TP Transmitter Disabled
|
|
#define PHY_CFG1_XMTPDN 0x2000 // 1=TP Transmitter Powered Down
|
|
#define PHY_CFG1_BYPSCR 0x0400 // 1=Bypass scrambler/descrambler
|
|
#define PHY_CFG1_UNSCDS 0x0200 // 1=Unscramble Idle Reception Disable
|
|
#define PHY_CFG1_EQLZR 0x0100 // 1=Rx Equalizer Disabled
|
|
#define PHY_CFG1_CABLE 0x0080 // 1=STP(150ohm), 0=UTP(100ohm)
|
|
#define PHY_CFG1_RLVL0 0x0040 // 1=Rx Squelch level reduced by 4.5db
|
|
#define PHY_CFG1_TLVL_SHIFT 2 // Transmit Output Level Adjust
|
|
#define PHY_CFG1_TLVL_MASK 0x003C
|
|
#define PHY_CFG1_TRF_MASK 0x0003 // Transmitter Rise/Fall time
|
|
|
|
|
|
// PHY Configuration Register 2
|
|
#define PHY_CFG2_REG 0x11
|
|
#define PHY_CFG2_APOLDIS 0x0020 // 1=Auto Polarity Correction disabled
|
|
#define PHY_CFG2_JABDIS 0x0010 // 1=Jabber disabled
|
|
#define PHY_CFG2_MREG 0x0008 // 1=Multiple register access (MII mgt)
|
|
#define PHY_CFG2_INTMDIO 0x0004 // 1=Interrupt signaled with MDIO pulseo
|
|
|
|
// PHY Status Output (and Interrupt status) Register
|
|
#define PHY_INT_REG 0x12 // Status Output (Interrupt Status)
|
|
#define PHY_INT_INT 0x8000 // 1=bits have changed since last read
|
|
#define PHY_INT_LNKFAIL 0x4000 // 1=Link Not detected
|
|
#define PHY_INT_LOSSSYNC 0x2000 // 1=Descrambler has lost sync
|
|
#define PHY_INT_CWRD 0x1000 // 1=Invalid 4B5B code detected on rx
|
|
#define PHY_INT_SSD 0x0800 // 1=No Start Of Stream detected on rx
|
|
#define PHY_INT_ESD 0x0400 // 1=No End Of Stream detected on rx
|
|
#define PHY_INT_RPOL 0x0200 // 1=Reverse Polarity detected
|
|
#define PHY_INT_JAB 0x0100 // 1=Jabber detected
|
|
#define PHY_INT_SPDDET 0x0080 // 1=100Base-TX mode, 0=10Base-T mode
|
|
#define PHY_INT_DPLXDET 0x0040 // 1=Device in Full Duplex
|
|
|
|
// PHY Interrupt/Status Mask Register
|
|
#define PHY_MASK_REG 0x13 // Interrupt Mask
|
|
// Uses the same bit definitions as PHY_INT_REG
|
|
|
|
|
|
/*
|
|
* SMC91C96 ethernet config and status registers.
|
|
* These are in the "attribute" space.
|
|
*/
|
|
#define ECOR 0x8000
|
|
#define ECOR_RESET 0x80
|
|
#define ECOR_LEVEL_IRQ 0x40
|
|
#define ECOR_WR_ATTRIB 0x04
|
|
#define ECOR_ENABLE 0x01
|
|
|
|
#define ECSR 0x8002
|
|
#define ECSR_IOIS8 0x20
|
|
#define ECSR_PWRDWN 0x04
|
|
#define ECSR_INT 0x02
|
|
|
|
#define ATTRIB_SIZE ((64*1024) << SMC_IO_SHIFT)
|
|
|
|
|
|
/*
|
|
* Macros to abstract register access according to the data bus
|
|
* capabilities. Please use those and not the in/out primitives.
|
|
* Note: the following macros do *not* select the bank -- this must
|
|
* be done separately as needed in the main code. The SMC_REG() macro
|
|
* only uses the bank argument for debugging purposes (when enabled).
|
|
*/
|
|
|
|
#if SMC_DEBUG > 0
|
|
#define SMC_REG(reg, bank) \
|
|
({ \
|
|
int __b = SMC_CURRENT_BANK(); \
|
|
if (unlikely((__b & ~0xf0) != (0x3300 | bank))) { \
|
|
printk( "%s: bank reg screwed (0x%04x)\n", \
|
|
CARDNAME, __b ); \
|
|
BUG(); \
|
|
} \
|
|
reg<<SMC_IO_SHIFT; \
|
|
})
|
|
#else
|
|
#define SMC_REG(reg, bank) (reg<<SMC_IO_SHIFT)
|
|
#endif
|
|
|
|
#if SMC_CAN_USE_8BIT
|
|
#define SMC_GET_PN() SMC_inb( ioaddr, PN_REG )
|
|
#define SMC_SET_PN(x) SMC_outb( x, ioaddr, PN_REG )
|
|
#define SMC_GET_AR() SMC_inb( ioaddr, AR_REG )
|
|
#define SMC_GET_TXFIFO() SMC_inb( ioaddr, TXFIFO_REG )
|
|
#define SMC_GET_RXFIFO() SMC_inb( ioaddr, RXFIFO_REG )
|
|
#define SMC_GET_INT() SMC_inb( ioaddr, INT_REG )
|
|
#define SMC_ACK_INT(x) SMC_outb( x, ioaddr, INT_REG )
|
|
#define SMC_GET_INT_MASK() SMC_inb( ioaddr, IM_REG )
|
|
#define SMC_SET_INT_MASK(x) SMC_outb( x, ioaddr, IM_REG )
|
|
#else
|
|
#define SMC_GET_PN() (SMC_inw( ioaddr, PN_REG ) & 0xFF)
|
|
#define SMC_SET_PN(x) SMC_outw( x, ioaddr, PN_REG )
|
|
#define SMC_GET_AR() (SMC_inw( ioaddr, PN_REG ) >> 8)
|
|
#define SMC_GET_TXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) & 0xFF)
|
|
#define SMC_GET_RXFIFO() (SMC_inw( ioaddr, TXFIFO_REG ) >> 8)
|
|
#define SMC_GET_INT() (SMC_inw( ioaddr, INT_REG ) & 0xFF)
|
|
#define SMC_ACK_INT(x) \
|
|
do { \
|
|
unsigned long __flags; \
|
|
int __mask; \
|
|
local_irq_save(__flags); \
|
|
__mask = SMC_inw( ioaddr, INT_REG ) & ~0xff; \
|
|
SMC_outw( __mask | (x), ioaddr, INT_REG ); \
|
|
local_irq_restore(__flags); \
|
|
} while (0)
|
|
#define SMC_GET_INT_MASK() (SMC_inw( ioaddr, INT_REG ) >> 8)
|
|
#define SMC_SET_INT_MASK(x) SMC_outw( (x) << 8, ioaddr, INT_REG )
|
|
#endif
|
|
|
|
#define SMC_CURRENT_BANK() SMC_inw( ioaddr, BANK_SELECT )
|
|
#define SMC_SELECT_BANK(x) SMC_outw( x, ioaddr, BANK_SELECT )
|
|
#define SMC_GET_BASE() SMC_inw( ioaddr, BASE_REG )
|
|
#define SMC_SET_BASE(x) SMC_outw( x, ioaddr, BASE_REG )
|
|
#define SMC_GET_CONFIG() SMC_inw( ioaddr, CONFIG_REG )
|
|
#define SMC_SET_CONFIG(x) SMC_outw( x, ioaddr, CONFIG_REG )
|
|
#define SMC_GET_COUNTER() SMC_inw( ioaddr, COUNTER_REG )
|
|
#define SMC_GET_CTL() SMC_inw( ioaddr, CTL_REG )
|
|
#define SMC_SET_CTL(x) SMC_outw( x, ioaddr, CTL_REG )
|
|
#define SMC_GET_MII() SMC_inw( ioaddr, MII_REG )
|
|
#define SMC_SET_MII(x) SMC_outw( x, ioaddr, MII_REG )
|
|
#define SMC_GET_MIR() SMC_inw( ioaddr, MIR_REG )
|
|
#define SMC_SET_MIR(x) SMC_outw( x, ioaddr, MIR_REG )
|
|
#define SMC_GET_MMU_CMD() SMC_inw( ioaddr, MMU_CMD_REG )
|
|
#define SMC_SET_MMU_CMD(x) SMC_outw( x, ioaddr, MMU_CMD_REG )
|
|
#define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG )
|
|
#define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG )
|
|
#define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG )
|
|
#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG )
|
|
#define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG )
|
|
#define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG )
|
|
#define SMC_GET_REV() SMC_inw( ioaddr, REV_REG )
|
|
#define SMC_GET_RPC() SMC_inw( ioaddr, RPC_REG )
|
|
#define SMC_SET_RPC(x) SMC_outw( x, ioaddr, RPC_REG )
|
|
#define SMC_GET_TCR() SMC_inw( ioaddr, TCR_REG )
|
|
#define SMC_SET_TCR(x) SMC_outw( x, ioaddr, TCR_REG )
|
|
|
|
#ifndef SMC_GET_MAC_ADDR
|
|
#define SMC_GET_MAC_ADDR(addr) \
|
|
do { \
|
|
unsigned int __v; \
|
|
__v = SMC_inw( ioaddr, ADDR0_REG ); \
|
|
addr[0] = __v; addr[1] = __v >> 8; \
|
|
__v = SMC_inw( ioaddr, ADDR1_REG ); \
|
|
addr[2] = __v; addr[3] = __v >> 8; \
|
|
__v = SMC_inw( ioaddr, ADDR2_REG ); \
|
|
addr[4] = __v; addr[5] = __v >> 8; \
|
|
} while (0)
|
|
#endif
|
|
|
|
#define SMC_SET_MAC_ADDR(addr) \
|
|
do { \
|
|
SMC_outw( addr[0]|(addr[1] << 8), ioaddr, ADDR0_REG ); \
|
|
SMC_outw( addr[2]|(addr[3] << 8), ioaddr, ADDR1_REG ); \
|
|
SMC_outw( addr[4]|(addr[5] << 8), ioaddr, ADDR2_REG ); \
|
|
} while (0)
|
|
|
|
#define SMC_SET_MCAST(x) \
|
|
do { \
|
|
const unsigned char *mt = (x); \
|
|
SMC_outw( mt[0] | (mt[1] << 8), ioaddr, MCAST_REG1 ); \
|
|
SMC_outw( mt[2] | (mt[3] << 8), ioaddr, MCAST_REG2 ); \
|
|
SMC_outw( mt[4] | (mt[5] << 8), ioaddr, MCAST_REG3 ); \
|
|
SMC_outw( mt[6] | (mt[7] << 8), ioaddr, MCAST_REG4 ); \
|
|
} while (0)
|
|
|
|
#if SMC_CAN_USE_32BIT
|
|
/*
|
|
* Some setups just can't write 8 or 16 bits reliably when not aligned
|
|
* to a 32 bit boundary. I tell you that exists!
|
|
* We re-do the ones here that can be easily worked around if they can have
|
|
* their low parts written to 0 without adverse effects.
|
|
*/
|
|
#undef SMC_SELECT_BANK
|
|
#define SMC_SELECT_BANK(x) SMC_outl( (x)<<16, ioaddr, 12<<SMC_IO_SHIFT )
|
|
#undef SMC_SET_RPC
|
|
#define SMC_SET_RPC(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(8, 0) )
|
|
#undef SMC_SET_PN
|
|
#define SMC_SET_PN(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(0, 2) )
|
|
#undef SMC_SET_PTR
|
|
#define SMC_SET_PTR(x) SMC_outl( (x)<<16, ioaddr, SMC_REG(4, 2) )
|
|
#endif
|
|
|
|
#if SMC_CAN_USE_32BIT
|
|
#define SMC_PUT_PKT_HDR(status, length) \
|
|
SMC_outl( (status) | (length) << 16, ioaddr, DATA_REG )
|
|
#define SMC_GET_PKT_HDR(status, length) \
|
|
do { \
|
|
unsigned int __val = SMC_inl( ioaddr, DATA_REG ); \
|
|
(status) = __val & 0xffff; \
|
|
(length) = __val >> 16; \
|
|
} while (0)
|
|
#else
|
|
#define SMC_PUT_PKT_HDR(status, length) \
|
|
do { \
|
|
SMC_outw( status, ioaddr, DATA_REG ); \
|
|
SMC_outw( length, ioaddr, DATA_REG ); \
|
|
} while (0)
|
|
#define SMC_GET_PKT_HDR(status, length) \
|
|
do { \
|
|
(status) = SMC_inw( ioaddr, DATA_REG ); \
|
|
(length) = SMC_inw( ioaddr, DATA_REG ); \
|
|
} while (0)
|
|
#endif
|
|
|
|
#if SMC_CAN_USE_32BIT
|
|
#define _SMC_PUSH_DATA(p, l) \
|
|
do { \
|
|
char *__ptr = (p); \
|
|
int __len = (l); \
|
|
if (__len >= 2 && (unsigned long)__ptr & 2) { \
|
|
__len -= 2; \
|
|
SMC_outw( *(u16 *)__ptr, ioaddr, DATA_REG ); \
|
|
__ptr += 2; \
|
|
} \
|
|
SMC_outsl( ioaddr, DATA_REG, __ptr, __len >> 2); \
|
|
if (__len & 2) { \
|
|
__ptr += (__len & ~3); \
|
|
SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \
|
|
} \
|
|
} while (0)
|
|
#define _SMC_PULL_DATA(p, l) \
|
|
do { \
|
|
char *__ptr = (p); \
|
|
int __len = (l); \
|
|
if ((unsigned long)__ptr & 2) { \
|
|
/* \
|
|
* We want 32bit alignment here. \
|
|
* Since some buses perform a full 32bit \
|
|
* fetch even for 16bit data we can't use \
|
|
* SMC_inw() here. Back both source (on chip \
|
|
* and destination) pointers of 2 bytes. \
|
|
*/ \
|
|
__ptr -= 2; \
|
|
__len += 2; \
|
|
SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \
|
|
} \
|
|
__len += 2; \
|
|
SMC_insl( ioaddr, DATA_REG, __ptr, __len >> 2); \
|
|
} while (0)
|
|
#elif SMC_CAN_USE_16BIT
|
|
#define _SMC_PUSH_DATA(p, l) SMC_outsw( ioaddr, DATA_REG, p, (l) >> 1 )
|
|
#define _SMC_PULL_DATA(p, l) SMC_insw ( ioaddr, DATA_REG, p, (l) >> 1 )
|
|
#elif SMC_CAN_USE_8BIT
|
|
#define _SMC_PUSH_DATA(p, l) SMC_outsb( ioaddr, DATA_REG, p, l )
|
|
#define _SMC_PULL_DATA(p, l) SMC_insb ( ioaddr, DATA_REG, p, l )
|
|
#endif
|
|
|
|
#if ! SMC_CAN_USE_16BIT
|
|
#define SMC_outw(x, ioaddr, reg) \
|
|
do { \
|
|
unsigned int __val16 = (x); \
|
|
SMC_outb( __val16, ioaddr, reg ); \
|
|
SMC_outb( __val16 >> 8, ioaddr, reg + (1 << SMC_IO_SHIFT));\
|
|
} while (0)
|
|
#define SMC_inw(ioaddr, reg) \
|
|
({ \
|
|
unsigned int __val16; \
|
|
__val16 = SMC_inb( ioaddr, reg ); \
|
|
__val16 |= SMC_inb( ioaddr, reg + (1 << SMC_IO_SHIFT)) << 8; \
|
|
__val16; \
|
|
})
|
|
#endif
|
|
|
|
#if SMC_CAN_USE_DATACS
|
|
#define SMC_PUSH_DATA(p, l) \
|
|
if ( lp->datacs ) { \
|
|
unsigned char *__ptr = (p); \
|
|
int __len = (l); \
|
|
if (__len >= 2 && (unsigned long)__ptr & 2) { \
|
|
__len -= 2; \
|
|
SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \
|
|
__ptr += 2; \
|
|
} \
|
|
outsl(lp->datacs, __ptr, __len >> 2); \
|
|
if (__len & 2) { \
|
|
__ptr += (__len & ~3); \
|
|
SMC_outw( *((u16 *)__ptr), ioaddr, DATA_REG ); \
|
|
} \
|
|
} else { \
|
|
_SMC_PUSH_DATA(p, l); \
|
|
}
|
|
|
|
#define SMC_PULL_DATA(p, l) \
|
|
if ( lp->datacs ) { \
|
|
unsigned char *__ptr = (p); \
|
|
int __len = (l); \
|
|
if ((unsigned long)__ptr & 2) { \
|
|
/* \
|
|
* We want 32bit alignment here. \
|
|
* Since some buses perform a full 32bit \
|
|
* fetch even for 16bit data we can't use \
|
|
* SMC_inw() here. Back both source (on chip \
|
|
* and destination) pointers of 2 bytes. \
|
|
*/ \
|
|
__ptr -= 2; \
|
|
__len += 2; \
|
|
SMC_SET_PTR( 2|PTR_READ|PTR_RCV|PTR_AUTOINC ); \
|
|
} \
|
|
__len += 2; \
|
|
insl( lp->datacs, __ptr, __len >> 2); \
|
|
} else { \
|
|
_SMC_PULL_DATA(p, l); \
|
|
}
|
|
#else
|
|
#define SMC_PUSH_DATA(p, l) _SMC_PUSH_DATA(p, l)
|
|
#define SMC_PULL_DATA(p, l) _SMC_PULL_DATA(p, l)
|
|
#endif
|
|
|
|
#if !defined (SMC_INTERRUPT_PREAMBLE)
|
|
# define SMC_INTERRUPT_PREAMBLE
|
|
#endif
|
|
|
|
#endif /* _SMC91X_H_ */
|