mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 13:43:55 +08:00
f0967eea80
This patch converts the drivers in drivers/hwmon/* to use the module_i2c_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Corentin Labbe <corentin.labbe@geomatys.fr> Cc: Dirk Eibach <eibach@gdsys.de> Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com> Cc: David George <david.george@ska.ac.za> Cc: "Hans J. Koch" <hjk@hansjkoch.de> Cc: Marc Hulsman <m.hulsman@tudelft.nl> Cc: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
739 lines
19 KiB
C
739 lines
19 KiB
C
/*
|
|
* max6650.c - Part of lm_sensors, Linux kernel modules for hardware
|
|
* monitoring.
|
|
*
|
|
* (C) 2007 by Hans J. Koch <hjk@hansjkoch.de>
|
|
*
|
|
* based on code written by John Morris <john.morris@spirentcom.com>
|
|
* Copyright (c) 2003 Spirent Communications
|
|
* and Claus Gindhart <claus.gindhart@kontron.com>
|
|
*
|
|
* This module has only been tested with the MAX6650 chip. It should
|
|
* also work with the MAX6651. It does not distinguish max6650 and max6651
|
|
* chips.
|
|
*
|
|
* The datasheet was last seen at:
|
|
*
|
|
* http://pdfserv.maxim-ic.com/en/ds/MAX6650-MAX6651.pdf
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
|
|
/*
|
|
* Insmod parameters
|
|
*/
|
|
|
|
/* fan_voltage: 5=5V fan, 12=12V fan, 0=don't change */
|
|
static int fan_voltage;
|
|
/* prescaler: Possible values are 1, 2, 4, 8, 16 or 0 for don't change */
|
|
static int prescaler;
|
|
/* clock: The clock frequency of the chip the driver should assume */
|
|
static int clock = 254000;
|
|
|
|
module_param(fan_voltage, int, S_IRUGO);
|
|
module_param(prescaler, int, S_IRUGO);
|
|
module_param(clock, int, S_IRUGO);
|
|
|
|
/*
|
|
* MAX 6650/6651 registers
|
|
*/
|
|
|
|
#define MAX6650_REG_SPEED 0x00
|
|
#define MAX6650_REG_CONFIG 0x02
|
|
#define MAX6650_REG_GPIO_DEF 0x04
|
|
#define MAX6650_REG_DAC 0x06
|
|
#define MAX6650_REG_ALARM_EN 0x08
|
|
#define MAX6650_REG_ALARM 0x0A
|
|
#define MAX6650_REG_TACH0 0x0C
|
|
#define MAX6650_REG_TACH1 0x0E
|
|
#define MAX6650_REG_TACH2 0x10
|
|
#define MAX6650_REG_TACH3 0x12
|
|
#define MAX6650_REG_GPIO_STAT 0x14
|
|
#define MAX6650_REG_COUNT 0x16
|
|
|
|
/*
|
|
* Config register bits
|
|
*/
|
|
|
|
#define MAX6650_CFG_V12 0x08
|
|
#define MAX6650_CFG_PRESCALER_MASK 0x07
|
|
#define MAX6650_CFG_PRESCALER_2 0x01
|
|
#define MAX6650_CFG_PRESCALER_4 0x02
|
|
#define MAX6650_CFG_PRESCALER_8 0x03
|
|
#define MAX6650_CFG_PRESCALER_16 0x04
|
|
#define MAX6650_CFG_MODE_MASK 0x30
|
|
#define MAX6650_CFG_MODE_ON 0x00
|
|
#define MAX6650_CFG_MODE_OFF 0x10
|
|
#define MAX6650_CFG_MODE_CLOSED_LOOP 0x20
|
|
#define MAX6650_CFG_MODE_OPEN_LOOP 0x30
|
|
#define MAX6650_COUNT_MASK 0x03
|
|
|
|
/*
|
|
* Alarm status register bits
|
|
*/
|
|
|
|
#define MAX6650_ALRM_MAX 0x01
|
|
#define MAX6650_ALRM_MIN 0x02
|
|
#define MAX6650_ALRM_TACH 0x04
|
|
#define MAX6650_ALRM_GPIO1 0x08
|
|
#define MAX6650_ALRM_GPIO2 0x10
|
|
|
|
/* Minimum and maximum values of the FAN-RPM */
|
|
#define FAN_RPM_MIN 240
|
|
#define FAN_RPM_MAX 30000
|
|
|
|
#define DIV_FROM_REG(reg) (1 << (reg & 7))
|
|
|
|
static int max6650_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id);
|
|
static int max6650_init_client(struct i2c_client *client);
|
|
static int max6650_remove(struct i2c_client *client);
|
|
static struct max6650_data *max6650_update_device(struct device *dev);
|
|
|
|
/*
|
|
* Driver data (common to all clients)
|
|
*/
|
|
|
|
static const struct i2c_device_id max6650_id[] = {
|
|
{ "max6650", 1 },
|
|
{ "max6651", 4 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max6650_id);
|
|
|
|
static struct i2c_driver max6650_driver = {
|
|
.driver = {
|
|
.name = "max6650",
|
|
},
|
|
.probe = max6650_probe,
|
|
.remove = max6650_remove,
|
|
.id_table = max6650_id,
|
|
};
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct max6650_data {
|
|
struct device *hwmon_dev;
|
|
struct mutex update_lock;
|
|
int nr_fans;
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
/* register values */
|
|
u8 speed;
|
|
u8 config;
|
|
u8 tach[4];
|
|
u8 count;
|
|
u8 dac;
|
|
u8 alarm;
|
|
};
|
|
|
|
static ssize_t get_fan(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct max6650_data *data = max6650_update_device(dev);
|
|
int rpm;
|
|
|
|
/*
|
|
* Calculation details:
|
|
*
|
|
* Each tachometer counts over an interval given by the "count"
|
|
* register (0.25, 0.5, 1 or 2 seconds). This module assumes
|
|
* that the fans produce two pulses per revolution (this seems
|
|
* to be the most common).
|
|
*/
|
|
|
|
rpm = ((data->tach[attr->index] * 120) / DIV_FROM_REG(data->count));
|
|
return sprintf(buf, "%d\n", rpm);
|
|
}
|
|
|
|
/*
|
|
* Set the fan speed to the specified RPM (or read back the RPM setting).
|
|
* This works in closed loop mode only. Use pwm1 for open loop speed setting.
|
|
*
|
|
* The MAX6650/1 will automatically control fan speed when in closed loop
|
|
* mode.
|
|
*
|
|
* Assumptions:
|
|
*
|
|
* 1) The MAX6650/1 internal 254kHz clock frequency is set correctly. Use
|
|
* the clock module parameter if you need to fine tune this.
|
|
*
|
|
* 2) The prescaler (low three bits of the config register) has already
|
|
* been set to an appropriate value. Use the prescaler module parameter
|
|
* if your BIOS doesn't initialize the chip properly.
|
|
*
|
|
* The relevant equations are given on pages 21 and 22 of the datasheet.
|
|
*
|
|
* From the datasheet, the relevant equation when in regulation is:
|
|
*
|
|
* [fCLK / (128 x (KTACH + 1))] = 2 x FanSpeed / KSCALE
|
|
*
|
|
* where:
|
|
*
|
|
* fCLK is the oscillator frequency (either the 254kHz internal
|
|
* oscillator or the externally applied clock)
|
|
*
|
|
* KTACH is the value in the speed register
|
|
*
|
|
* FanSpeed is the speed of the fan in rps
|
|
*
|
|
* KSCALE is the prescaler value (1, 2, 4, 8, or 16)
|
|
*
|
|
* When reading, we need to solve for FanSpeed. When writing, we need to
|
|
* solve for KTACH.
|
|
*
|
|
* Note: this tachometer is completely separate from the tachometers
|
|
* used to measure the fan speeds. Only one fan's speed (fan1) is
|
|
* controlled.
|
|
*/
|
|
|
|
static ssize_t get_target(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct max6650_data *data = max6650_update_device(dev);
|
|
int kscale, ktach, rpm;
|
|
|
|
/*
|
|
* Use the datasheet equation:
|
|
*
|
|
* FanSpeed = KSCALE x fCLK / [256 x (KTACH + 1)]
|
|
*
|
|
* then multiply by 60 to give rpm.
|
|
*/
|
|
|
|
kscale = DIV_FROM_REG(data->config);
|
|
ktach = data->speed;
|
|
rpm = 60 * kscale * clock / (256 * (ktach + 1));
|
|
return sprintf(buf, "%d\n", rpm);
|
|
}
|
|
|
|
static ssize_t set_target(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
int kscale, ktach;
|
|
unsigned long rpm;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &rpm);
|
|
if (err)
|
|
return err;
|
|
|
|
rpm = SENSORS_LIMIT(rpm, FAN_RPM_MIN, FAN_RPM_MAX);
|
|
|
|
/*
|
|
* Divide the required speed by 60 to get from rpm to rps, then
|
|
* use the datasheet equation:
|
|
*
|
|
* KTACH = [(fCLK x KSCALE) / (256 x FanSpeed)] - 1
|
|
*/
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
kscale = DIV_FROM_REG(data->config);
|
|
ktach = ((clock * kscale) / (256 * rpm / 60)) - 1;
|
|
if (ktach < 0)
|
|
ktach = 0;
|
|
if (ktach > 255)
|
|
ktach = 255;
|
|
data->speed = ktach;
|
|
|
|
i2c_smbus_write_byte_data(client, MAX6650_REG_SPEED, data->speed);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Get/set the fan speed in open loop mode using pwm1 sysfs file.
|
|
* Speed is given as a relative value from 0 to 255, where 255 is maximum
|
|
* speed. Note that this is done by writing directly to the chip's DAC,
|
|
* it won't change the closed loop speed set by fan1_target.
|
|
* Also note that due to rounding errors it is possible that you don't read
|
|
* back exactly the value you have set.
|
|
*/
|
|
|
|
static ssize_t get_pwm(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
int pwm;
|
|
struct max6650_data *data = max6650_update_device(dev);
|
|
|
|
/*
|
|
* Useful range for dac is 0-180 for 12V fans and 0-76 for 5V fans.
|
|
* Lower DAC values mean higher speeds.
|
|
*/
|
|
if (data->config & MAX6650_CFG_V12)
|
|
pwm = 255 - (255 * (int)data->dac)/180;
|
|
else
|
|
pwm = 255 - (255 * (int)data->dac)/76;
|
|
|
|
if (pwm < 0)
|
|
pwm = 0;
|
|
|
|
return sprintf(buf, "%d\n", pwm);
|
|
}
|
|
|
|
static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
unsigned long pwm;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &pwm);
|
|
if (err)
|
|
return err;
|
|
|
|
pwm = SENSORS_LIMIT(pwm, 0, 255);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (data->config & MAX6650_CFG_V12)
|
|
data->dac = 180 - (180 * pwm)/255;
|
|
else
|
|
data->dac = 76 - (76 * pwm)/255;
|
|
|
|
i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, data->dac);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Get/Set controller mode:
|
|
* Possible values:
|
|
* 0 = Fan always on
|
|
* 1 = Open loop, Voltage is set according to speed, not regulated.
|
|
* 2 = Closed loop, RPM for all fans regulated by fan1 tachometer
|
|
*/
|
|
|
|
static ssize_t get_enable(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct max6650_data *data = max6650_update_device(dev);
|
|
int mode = (data->config & MAX6650_CFG_MODE_MASK) >> 4;
|
|
int sysfs_modes[4] = {0, 1, 2, 1};
|
|
|
|
return sprintf(buf, "%d\n", sysfs_modes[mode]);
|
|
}
|
|
|
|
static ssize_t set_enable(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
int max6650_modes[3] = {0, 3, 2};
|
|
unsigned long mode;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &mode);
|
|
if (err)
|
|
return err;
|
|
|
|
if (mode > 2)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
data->config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
|
|
data->config = (data->config & ~MAX6650_CFG_MODE_MASK)
|
|
| (max6650_modes[mode] << 4);
|
|
|
|
i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, data->config);
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Read/write functions for fan1_div sysfs file. The MAX6650 has no such
|
|
* divider. We handle this by converting between divider and counttime:
|
|
*
|
|
* (counttime == k) <==> (divider == 2^k), k = 0, 1, 2, or 3
|
|
*
|
|
* Lower values of k allow to connect a faster fan without the risk of
|
|
* counter overflow. The price is lower resolution. You can also set counttime
|
|
* using the module parameter. Note that the module parameter "prescaler" also
|
|
* influences the behaviour. Unfortunately, there's no sysfs attribute
|
|
* defined for that. See the data sheet for details.
|
|
*/
|
|
|
|
static ssize_t get_div(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct max6650_data *data = max6650_update_device(dev);
|
|
|
|
return sprintf(buf, "%d\n", DIV_FROM_REG(data->count));
|
|
}
|
|
|
|
static ssize_t set_div(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
unsigned long div;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &div);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
switch (div) {
|
|
case 1:
|
|
data->count = 0;
|
|
break;
|
|
case 2:
|
|
data->count = 1;
|
|
break;
|
|
case 4:
|
|
data->count = 2;
|
|
break;
|
|
case 8:
|
|
data->count = 3;
|
|
break;
|
|
default:
|
|
mutex_unlock(&data->update_lock);
|
|
return -EINVAL;
|
|
}
|
|
|
|
i2c_smbus_write_byte_data(client, MAX6650_REG_COUNT, data->count);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
/*
|
|
* Get alarm stati:
|
|
* Possible values:
|
|
* 0 = no alarm
|
|
* 1 = alarm
|
|
*/
|
|
|
|
static ssize_t get_alarm(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
struct max6650_data *data = max6650_update_device(dev);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
int alarm = 0;
|
|
|
|
if (data->alarm & attr->index) {
|
|
mutex_lock(&data->update_lock);
|
|
alarm = 1;
|
|
data->alarm &= ~attr->index;
|
|
data->alarm |= i2c_smbus_read_byte_data(client,
|
|
MAX6650_REG_ALARM);
|
|
mutex_unlock(&data->update_lock);
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", alarm);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, get_fan, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, get_fan, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, get_fan, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, get_fan, NULL, 3);
|
|
static DEVICE_ATTR(fan1_target, S_IWUSR | S_IRUGO, get_target, set_target);
|
|
static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, get_div, set_div);
|
|
static DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, get_enable, set_enable);
|
|
static DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, get_pwm, set_pwm);
|
|
static SENSOR_DEVICE_ATTR(fan1_max_alarm, S_IRUGO, get_alarm, NULL,
|
|
MAX6650_ALRM_MAX);
|
|
static SENSOR_DEVICE_ATTR(fan1_min_alarm, S_IRUGO, get_alarm, NULL,
|
|
MAX6650_ALRM_MIN);
|
|
static SENSOR_DEVICE_ATTR(fan1_fault, S_IRUGO, get_alarm, NULL,
|
|
MAX6650_ALRM_TACH);
|
|
static SENSOR_DEVICE_ATTR(gpio1_alarm, S_IRUGO, get_alarm, NULL,
|
|
MAX6650_ALRM_GPIO1);
|
|
static SENSOR_DEVICE_ATTR(gpio2_alarm, S_IRUGO, get_alarm, NULL,
|
|
MAX6650_ALRM_GPIO2);
|
|
|
|
static umode_t max6650_attrs_visible(struct kobject *kobj, struct attribute *a,
|
|
int n)
|
|
{
|
|
struct device *dev = container_of(kobj, struct device, kobj);
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
u8 alarm_en = i2c_smbus_read_byte_data(client, MAX6650_REG_ALARM_EN);
|
|
struct device_attribute *devattr;
|
|
|
|
/*
|
|
* Hide the alarms that have not been enabled by the firmware
|
|
*/
|
|
|
|
devattr = container_of(a, struct device_attribute, attr);
|
|
if (devattr == &sensor_dev_attr_fan1_max_alarm.dev_attr
|
|
|| devattr == &sensor_dev_attr_fan1_min_alarm.dev_attr
|
|
|| devattr == &sensor_dev_attr_fan1_fault.dev_attr
|
|
|| devattr == &sensor_dev_attr_gpio1_alarm.dev_attr
|
|
|| devattr == &sensor_dev_attr_gpio2_alarm.dev_attr) {
|
|
if (!(alarm_en & to_sensor_dev_attr(devattr)->index))
|
|
return 0;
|
|
}
|
|
|
|
return a->mode;
|
|
}
|
|
|
|
static struct attribute *max6650_attrs[] = {
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&dev_attr_fan1_target.attr,
|
|
&dev_attr_fan1_div.attr,
|
|
&dev_attr_pwm1_enable.attr,
|
|
&dev_attr_pwm1.attr,
|
|
&sensor_dev_attr_fan1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_fault.dev_attr.attr,
|
|
&sensor_dev_attr_gpio1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_gpio2_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group max6650_attr_grp = {
|
|
.attrs = max6650_attrs,
|
|
.is_visible = max6650_attrs_visible,
|
|
};
|
|
|
|
static struct attribute *max6651_attrs[] = {
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan4_input.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group max6651_attr_grp = {
|
|
.attrs = max6651_attrs,
|
|
};
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
static int max6650_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct max6650_data *data;
|
|
int err;
|
|
|
|
data = kzalloc(sizeof(struct max6650_data), GFP_KERNEL);
|
|
if (!data) {
|
|
dev_err(&client->dev, "out of memory.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
data->nr_fans = id->driver_data;
|
|
|
|
/*
|
|
* Initialize the max6650 chip
|
|
*/
|
|
err = max6650_init_client(client);
|
|
if (err)
|
|
goto err_free;
|
|
|
|
err = sysfs_create_group(&client->dev.kobj, &max6650_attr_grp);
|
|
if (err)
|
|
goto err_free;
|
|
/* 3 additional fan inputs for the MAX6651 */
|
|
if (data->nr_fans == 4) {
|
|
err = sysfs_create_group(&client->dev.kobj, &max6651_attr_grp);
|
|
if (err)
|
|
goto err_remove;
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (!IS_ERR(data->hwmon_dev))
|
|
return 0;
|
|
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
dev_err(&client->dev, "error registering hwmon device.\n");
|
|
if (data->nr_fans == 4)
|
|
sysfs_remove_group(&client->dev.kobj, &max6651_attr_grp);
|
|
err_remove:
|
|
sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
|
|
err_free:
|
|
kfree(data);
|
|
return err;
|
|
}
|
|
|
|
static int max6650_remove(struct i2c_client *client)
|
|
{
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
if (data->nr_fans == 4)
|
|
sysfs_remove_group(&client->dev.kobj, &max6651_attr_grp);
|
|
sysfs_remove_group(&client->dev.kobj, &max6650_attr_grp);
|
|
kfree(data);
|
|
return 0;
|
|
}
|
|
|
|
static int max6650_init_client(struct i2c_client *client)
|
|
{
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
int config;
|
|
int err = -EIO;
|
|
|
|
config = i2c_smbus_read_byte_data(client, MAX6650_REG_CONFIG);
|
|
|
|
if (config < 0) {
|
|
dev_err(&client->dev, "Error reading config, aborting.\n");
|
|
return err;
|
|
}
|
|
|
|
switch (fan_voltage) {
|
|
case 0:
|
|
break;
|
|
case 5:
|
|
config &= ~MAX6650_CFG_V12;
|
|
break;
|
|
case 12:
|
|
config |= MAX6650_CFG_V12;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev, "illegal value for fan_voltage (%d)\n",
|
|
fan_voltage);
|
|
}
|
|
|
|
dev_info(&client->dev, "Fan voltage is set to %dV.\n",
|
|
(config & MAX6650_CFG_V12) ? 12 : 5);
|
|
|
|
switch (prescaler) {
|
|
case 0:
|
|
break;
|
|
case 1:
|
|
config &= ~MAX6650_CFG_PRESCALER_MASK;
|
|
break;
|
|
case 2:
|
|
config = (config & ~MAX6650_CFG_PRESCALER_MASK)
|
|
| MAX6650_CFG_PRESCALER_2;
|
|
break;
|
|
case 4:
|
|
config = (config & ~MAX6650_CFG_PRESCALER_MASK)
|
|
| MAX6650_CFG_PRESCALER_4;
|
|
break;
|
|
case 8:
|
|
config = (config & ~MAX6650_CFG_PRESCALER_MASK)
|
|
| MAX6650_CFG_PRESCALER_8;
|
|
break;
|
|
case 16:
|
|
config = (config & ~MAX6650_CFG_PRESCALER_MASK)
|
|
| MAX6650_CFG_PRESCALER_16;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev, "illegal value for prescaler (%d)\n",
|
|
prescaler);
|
|
}
|
|
|
|
dev_info(&client->dev, "Prescaler is set to %d.\n",
|
|
1 << (config & MAX6650_CFG_PRESCALER_MASK));
|
|
|
|
/*
|
|
* If mode is set to "full off", we change it to "open loop" and
|
|
* set DAC to 255, which has the same effect. We do this because
|
|
* there's no "full off" mode defined in hwmon specifcations.
|
|
*/
|
|
|
|
if ((config & MAX6650_CFG_MODE_MASK) == MAX6650_CFG_MODE_OFF) {
|
|
dev_dbg(&client->dev, "Change mode to open loop, full off.\n");
|
|
config = (config & ~MAX6650_CFG_MODE_MASK)
|
|
| MAX6650_CFG_MODE_OPEN_LOOP;
|
|
if (i2c_smbus_write_byte_data(client, MAX6650_REG_DAC, 255)) {
|
|
dev_err(&client->dev, "DAC write error, aborting.\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
if (i2c_smbus_write_byte_data(client, MAX6650_REG_CONFIG, config)) {
|
|
dev_err(&client->dev, "Config write error, aborting.\n");
|
|
return err;
|
|
}
|
|
|
|
data->config = config;
|
|
data->count = i2c_smbus_read_byte_data(client, MAX6650_REG_COUNT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const u8 tach_reg[] = {
|
|
MAX6650_REG_TACH0,
|
|
MAX6650_REG_TACH1,
|
|
MAX6650_REG_TACH2,
|
|
MAX6650_REG_TACH3,
|
|
};
|
|
|
|
static struct max6650_data *max6650_update_device(struct device *dev)
|
|
{
|
|
int i;
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct max6650_data *data = i2c_get_clientdata(client);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
|
|
data->speed = i2c_smbus_read_byte_data(client,
|
|
MAX6650_REG_SPEED);
|
|
data->config = i2c_smbus_read_byte_data(client,
|
|
MAX6650_REG_CONFIG);
|
|
for (i = 0; i < data->nr_fans; i++) {
|
|
data->tach[i] = i2c_smbus_read_byte_data(client,
|
|
tach_reg[i]);
|
|
}
|
|
data->count = i2c_smbus_read_byte_data(client,
|
|
MAX6650_REG_COUNT);
|
|
data->dac = i2c_smbus_read_byte_data(client, MAX6650_REG_DAC);
|
|
|
|
/*
|
|
* Alarms are cleared on read in case the condition that
|
|
* caused the alarm is removed. Keep the value latched here
|
|
* for providing the register through different alarm files.
|
|
*/
|
|
data->alarm |= i2c_smbus_read_byte_data(client,
|
|
MAX6650_REG_ALARM);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
module_i2c_driver(max6650_driver);
|
|
|
|
MODULE_AUTHOR("Hans J. Koch");
|
|
MODULE_DESCRIPTION("MAX6650 sensor driver");
|
|
MODULE_LICENSE("GPL");
|