..
include /mach
ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
2013-12-20 17:17:16 +01:00
am33xx-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
am33xx.h
ARM: OMAP2+: AM43x: early init
2013-06-12 08:00:35 -07:00
board-cm-t35.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
board-devkit8000.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-flash.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
board-flash.h
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
board-generic.c
ARM: SoC platform changes
2015-02-17 09:27:54 -08:00
board-ldp.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-n8x0.c
ARM: SoC/OMAP GPMC driver cleanup and move for 3.19
2014-12-09 16:57:56 -08:00
board-omap3beagle.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-omap3logic.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-omap3pandora.c
ARM: OMAP2+: Make sure pandora_wl1251_init_card() applies to SDIO only
2015-01-19 09:56:04 +01:00
board-omap3stalker.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-omap3touchbook.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-overo.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-rx51-peripherals.c
media updates for v3.19-rc1
2014-12-11 11:49:23 -08:00
board-rx51-video.c
ARM: OMAP2+: N900: remove omapdss init for DT boot
2014-04-18 16:37:43 -07:00
board-rx51.c
arm: omap: irq: drop omap3_intc_handle_irq()
2014-09-11 13:05:40 -07:00
board-rx51.h
clkt2xxx_dpll.c
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:51 -07:00
clkt2xxx_dpllcore.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
clkt2xxx_virt_prcm_set.c
ARM: OMAP2: clock: add DT boot support for cpufreq_ck
2014-05-28 13:05:57 +03:00
clkt34xx_dpll3m2.c
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
2012-11-30 08:40:31 -08:00
clkt_clksel.c
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
2014-01-17 12:37:00 -08:00
clkt_dpll.c
Few fixes for the v3.17 merge window:
2014-08-09 08:23:27 -07:00
clkt_iclk.c
ARM: OMAP2+: clock/interface: remove some headers from clkt_iclk.c file
2014-07-15 14:09:24 -06:00
clock2xxx.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
clock2xxx.h
ARM: OMAP2: clock: remove unused apll code
2015-01-07 10:54:40 -08:00
clock3xxx.c
ARM: OMAP3: clock: add support for dpll4_set_rate_and_parent
2014-11-13 09:26:33 -07:00
clock3xxx.h
CLK: TI: add omap3 clock init file
2014-01-17 12:35:48 -08:00
clock34xx.c
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:50 -07:00
clock34xx.h
clock36xx.c
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
2014-01-17 12:37:00 -08:00
clock36xx.h
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:50 -07:00
clock44xx.h
clock2430.c
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:51 -07:00
clock3517.c
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
2012-11-12 19:18:50 -07:00
clock3517.h
clock_common_data.c
arm: omap2+ remove dead clock code
2015-02-02 14:23:39 -08:00
clock.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
clock.h
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
clockdomain.c
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
2013-01-29 14:59:58 -07:00
clockdomain.h
ARM: OMAP2+: Add clock domain support for dm816x
2015-01-26 09:26:32 -08:00
clockdomains2xxx_3xxx_data.c
clockdomains3xxx_data.c
ARM: OMAP3: fix iva mmu programming issues
2014-03-12 09:48:26 -07:00
clockdomains7xx_data.c
ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header
2013-08-23 04:28:36 -06:00
clockdomains33xx_data.c
clockdomains43xx_data.c
ARM: OMAP2+: CM: AM43x clockdomain data
2013-10-13 22:48:36 -06:00
clockdomains44xx_data.c
ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP
2012-10-29 22:02:13 -06:00
clockdomains54xx_data.c
ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
2013-06-08 11:56:15 -06:00
clockdomains81xx_data.c
ARM: OMAP2+: Add clock domain support for dm816x
2015-01-26 09:26:32 -08:00
clockdomains2420_data.c
ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
2012-10-18 16:23:46 -07:00
clockdomains2430_data.c
ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
2012-10-18 16:23:46 -07:00
cm1_7xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm1_44xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm1_54xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_7xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_44xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2_54xx.h
ARM: OMAP4+: CM: remove omap4_cm1/cm2_* functions
2014-10-27 08:39:25 -07:00
cm2xxx_3xxx.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
cm2xxx.c
ARM: OMAP2: CM: remove unused PLL functions
2015-01-07 14:27:39 -08:00
cm2xxx.h
ARM: OMAP2: CM: remove unused PLL functions
2015-01-07 14:27:39 -08:00
cm3xxx.c
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
2014-10-27 08:39:24 -07:00
cm3xxx.h
ARM: OMAP2/3: CM: make cm_split_idlest_reg SoC calls static
2014-10-27 08:39:24 -07:00
cm33xx.c
ARM: OMAP2+: cm33xx.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
cm33xx.h
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
2014-10-27 08:39:24 -07:00
cm44xx.h
ARM: OMAP4: CM: move public definitions from cminst44xx.h to cm44xx.h
2014-10-27 08:39:25 -07:00
cm81xx.h
ARM: OMAP2+: Add clock domain support for dm816x
2015-01-26 09:26:32 -08:00
cm_common.c
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
2014-10-27 08:39:24 -07:00
cm-regbits-7xx.h
ARM: OMAP: DRA7: CM: Add minimal regbit shifts
2013-08-23 04:28:36 -06:00
cm-regbits-24xx.h
ARM: OMAP2: convert sys_ck and osc_ck to standard clock types
2014-07-02 14:26:06 +03:00
cm-regbits-33xx.h
ARM: OMAP3: PRM/CM: Cleanup unused header
2013-07-21 22:10:03 -06:00
cm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
cm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
cm-regbits-54xx.h
ARM: OMAP5: PRM/CM: Cleanup unused header
2013-07-21 22:10:25 -06:00
cm.h
ARM: OMAP2+: CM: add common APIs for cm_module_enable/disable
2014-10-27 08:39:24 -07:00
cminst44xx.c
ARM: OMAP4: CM: make cminst direct register access functions static
2014-10-27 08:39:25 -07:00
common-board-devices.c
ARM: arm-soc: Header cleanups
2012-12-12 11:45:16 -08:00
common-board-devices.h
arm: omap2: n8x0: move i2c devices to DT
2014-09-16 14:43:11 -07:00
common.c
ARM: OMAP2+: remove DSP platform device
2014-07-15 21:01:05 -07:00
common.h
ARM: SoC non-critical fixes
2015-02-17 09:15:46 -08:00
control.c
ARM: OMAP3: Fix coding style problems in arch/arm/mach-omap2/control.c
2014-08-01 01:21:14 -07:00
control.h
ARM: SoC non-critical fixes
2015-02-17 09:15:46 -08:00
cpuidle34xx.c
cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic
2014-11-12 21:17:27 +01:00
cpuidle44xx.c
cpuidle: Invert CPUIDLE_FLAG_TIME_VALID logic
2014-11-12 21:17:27 +01:00
ctrl_module_wkup_44xx.h
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
2012-09-20 15:02:33 -07:00
devices.c
media updates for v3.19-rc1
2014-12-11 11:49:23 -08:00
devices.h
display.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
display.h
ARM: OMAP2+: add omapdss_init_of()
2014-03-19 10:52:23 +02:00
dma.c
ARM: OMAP2+: DMA: remove requirement of irq for platform-dma driver
2014-07-21 23:32:51 -07:00
dpll3xxx.c
clk: Add rate constraints to clocks
2015-02-02 14:23:42 -08:00
dpll44xx.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
drm.c
ARM: OMAP2+: display: Create omapdrm device inside omap_display_init
2013-10-08 14:02:35 -07:00
dss-common.c
ARM: OMAP2+: remove pdata quirks for displays
2014-04-04 09:55:18 +03:00
dss-common.h
ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
2013-10-09 07:54:34 -07:00
fb.c
ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init
2013-10-08 14:02:51 -07:00
gpio.c
arm-soc: soc-specific updates
2013-02-21 15:27:22 -08:00
gpmc-nand.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
gpmc-onenand.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
gpmc-smsc911x.c
ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
2013-11-14 10:40:36 -08:00
gpmc-smsc911x.h
ARM: OMAP2+: Make gpmc-smsc911x.h local
2012-09-20 15:03:55 -07:00
gpmc.h
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
hdq1w.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
hdq1w.h
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
2012-10-18 16:05:55 -07:00
hsmmc.c
mmc: omap_hsmmc: remove unused slot_id parameter
2014-11-26 14:30:56 +01:00
hsmmc.h
mmc: omap_hsmmc: remove unused slot_id parameter
2014-11-26 14:30:56 +01:00
hwspinlock.c
arm-soc: soc-specific updates
2013-02-21 15:27:22 -08:00
i2c.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
i2c.h
ARM: OMAP: Fix relative includes for shared i2c.h file
2012-10-31 15:37:13 -07:00
id.c
ARM: OMAP2+: Fix ti81xx devtype
2015-01-14 17:37:15 -08:00
id.h
io.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
iomap.h
Kconfig
ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
2015-01-20 08:49:08 -08:00
l3_2xxx.h
ARM: OMAP2+: Make l3_2xxx.h local
2012-09-20 15:03:59 -07:00
l3_3xxx.h
ARM: OMAP2+: Make l3_3xxx.h local
2012-09-20 15:04:00 -07:00
l4_2xxx.h
ARM: OMAP2+: Make l4_2xxx.h local
2012-09-20 15:04:01 -07:00
l4_3xxx.h
ARM: OMAP2+: Make l4_3xxx.h local
2012-09-20 15:04:03 -07:00
Makefile
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
Makefile.boot
ARM: dtb: move all dtb targets to common Makefile
2012-09-20 22:58:17 -07:00
mcbsp.c
ARM: OMAP3: McBSP: do not access CM register directly
2013-10-19 10:11:51 -06:00
mmc.h
ARM: OMAP2: MMC: include mmc-omap platform header directly
2014-11-26 14:30:53 +01:00
msdi.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
mux34xx.c
ARM: OMAP2+: mux: fix trivial typo in name
2013-09-18 12:02:01 -07:00
mux34xx.h
omap: mux: add AM/DM37x gpios
2013-05-08 17:07:40 -07:00
mux.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
mux.h
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
2014-02-28 15:36:34 -08:00
omap2-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
omap3-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
omap4-common.c
ARM: make of_device_ids const
2015-02-19 09:44:25 +01:00
omap4-restart.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
omap4-sar-layout.h
ARM: arm-soc cleanup for 3.10
2013-05-02 09:03:55 -07:00
omap24xx.h
omap34xx.h
omap44xx.h
ARM: OMAP: Make use of available scu_a9_get_base() interface
2013-01-28 10:41:39 -07:00
omap54xx.h
ARM: DRA7: Reuse io tables and add a new .init_early
2013-08-13 11:00:35 +05:30
omap_device.c
ARM / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM
2014-12-13 00:42:49 +01:00
omap_device.h
ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
2013-12-10 09:39:52 -08:00
omap_hwmod_2xxx_3xxx_interconnect_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2xxx_3xxx_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_2xxx_interconnect_data.c
ARM: OMAP2+: Remove legacy hwmod entries for omap2
2013-11-25 15:31:18 -08:00
omap_hwmod_2xxx_ipblock_data.c
ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
2013-12-25 21:41:27 -07:00
omap_hwmod_3xxx_data.c
ARM: OMAP3: Remove legacy support for am35xx-emac
2015-01-13 09:00:38 -08:00
omap_hwmod_7xx_data.c
ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
2015-01-20 18:12:17 -07:00
omap_hwmod_33xx_43xx_common_data.h
ARM: OMAP2+: hwmod: AM43x support
2013-10-13 22:48:46 -06:00
omap_hwmod_33xx_43xx_interconnect_data.c
ARM: AM33xx: hwmod_data: Remove legacy mailbox addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_33xx_43xx_ipblock_data.c
ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
2014-11-26 14:30:53 +01:00
omap_hwmod_33xx_data.c
ARM: OMAP2: MMC: include mmc-omap platform header directly
2014-11-26 14:30:53 +01:00
omap_hwmod_43xx_data.c
ARM: AM43xx: hwmod: set DSS submodule parent hwmods
2015-01-20 18:12:17 -07:00
omap_hwmod_44xx_data.c
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
omap_hwmod_54xx_data.c
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
omap_hwmod_81xx_data.c
ARM: OMAP2+: Add dm816x hwmod support
2015-01-26 09:26:32 -08:00
omap_hwmod_2420_data.c
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_2430_data.c
ARM: OMAP1/2+: MMC: separate platform data for mmc and mmc hs driver
2014-11-26 14:30:53 +01:00
omap_hwmod_common_data.c
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
2012-10-18 16:05:55 -07:00
omap_hwmod_common_data.h
ARM: OMAP2: hwmod_data: Remove legacy mailbox data and addrs
2014-07-15 05:08:56 -07:00
omap_hwmod_common_ipblock_data.c
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
omap_hwmod_reset.c
ARM: omap2: include linux/errno.h in hwmod_reset
2013-02-15 13:36:47 +01:00
omap_hwmod.c
ARM: SoC platform changes
2015-02-17 09:27:54 -08:00
omap_hwmod.h
ARM: SoC platform changes
2015-02-17 09:27:54 -08:00
omap_opp_data.h
Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock
2012-11-13 13:25:38 -08:00
omap_phy_internal.c
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
omap_twl.c
mfd: twl-core: Fix idle mode signaling for omaps when booted with device tree
2014-04-23 15:31:05 +01:00
omap-headsmp.S
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
2015-01-05 15:48:21 -08:00
omap-hotplug.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
omap-iommu.c
ARM: omap: Don't set iommu pdata da_start and da_end fields
2014-07-29 12:39:23 +02:00
omap-mpuss-lowpower.c
ARM: OMAP4+: PM: Program CPU logic power state
2014-11-10 16:02:05 -08:00
omap-pm-noop.c
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
omap-pm.h
ARM: OMAP2+: omap-pm-noop.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
omap-secure.c
RX-51: Add support for OMAP3 ROM Random Number Generator
2013-10-08 12:02:12 -07:00
omap-secure.h
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
2014-09-08 11:38:41 -05:00
omap-smc.S
ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
2013-10-08 11:55:32 -07:00
omap-smp.c
ARM: omap5/dra7xx: Enable booting secondary CPU in HYP mode
2015-01-05 15:48:21 -08:00
omap-wakeupgen.c
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
2014-09-08 11:38:43 -05:00
omap-wakeupgen.h
ARM: OMAP5 / DRA7: PM / wakeupgen: Enables ES2 PM mode by default
2014-09-08 11:38:41 -05:00
opp2xxx.h
opp3xxx_data.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
opp4xxx_data.c
ARM: OMAP2+: Use omap initcalls
2013-01-11 11:24:18 -08:00
opp2420_data.c
opp2430_data.c
opp.c
ACPI and power management updates for 3.13-rc1
2013-11-14 13:41:48 +09:00
pdata-quirks.c
ARM: OMAP3: Remove legacy support for am35xx-emac
2015-01-13 09:00:38 -08:00
pm24xx.c
ARM: SoC device-tree changes for 3.17
2014-08-08 11:16:58 -07:00
pm34xx.c
ARM: OMAP2+: Prepare to move GPMC to drivers by platform data header
2014-11-20 12:11:25 -08:00
pm44xx.c
ARM: OMAP4+: PM: Centralize static dependency mapping table
2014-11-10 16:01:40 -08:00
pm-debug.c
Merge branch 'cleanup' into for-linus
2013-05-02 21:31:29 +01:00
pm.c
cpufreq: cpu0: rename driver and internals to 'cpufreq_dt'
2014-10-03 15:37:54 +02:00
pm.h
ARM: OMAP5 / DRA7: Enable CPU RET on suspend
2014-09-08 11:38:43 -05:00
pmu.c
arm: omap: specify PMUs are for ARMv7 CPUs
2015-02-06 00:13:06 -08:00
powerdomain-common.c
ARM: OMAP4: PRCM: remove references to cm-regbits-44xx.h from PRCM core files
2014-05-15 22:35:10 -06:00
powerdomain.c
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
powerdomain.h
ARM: OMAP2+: powerdomain.c: Remove some unused functions
2015-01-07 09:53:51 -08:00
powerdomains2xxx_3xxx_data.c
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
2013-01-29 14:59:58 -07:00
powerdomains2xxx_3xxx_data.h
powerdomains2xxx_data.c
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
2013-01-29 14:59:58 -07:00
powerdomains3xxx_data.c
ARM: OMAP2+: Fix ti81xx class type
2015-01-14 17:37:16 -08:00
powerdomains7xx_data.c
ARM: OMAP: DRA7: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:31 -05:00
powerdomains33xx_data.c
powerdomains43xx_data.c
ARM: OMAP2+: PM: AM43x powerdomain data
2013-10-13 22:48:25 -06:00
powerdomains44xx_data.c
powerdomains54xx_data.c
ARM: OMAP5: powerdomain data: fix powerdomain powerstate
2014-09-08 11:22:40 -05:00
prcm43xx.h
ARM: AM43xx: hwmod: add DSS hwmod data
2014-07-05 17:44:57 -06:00
prcm44xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu7xx.h
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
2013-08-23 04:28:36 -06:00
prcm_mpu44xx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
prcm_mpu44xx.h
ARM: OMAP2+: PRCM: cleanup some header includes
2014-05-15 22:34:48 -06:00
prcm_mpu54xx.h
ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
2013-06-08 11:55:18 -06:00
prcm_mpu_44xx_54xx.h
ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
2013-06-08 11:54:40 -06:00
prcm-common.h
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
prm2xxx_3xxx.c
ARM: OMAP2+: PRM: add generic API for checking hardreset status
2014-10-27 08:39:25 -07:00
prm2xxx_3xxx.h
ARM: OMAP2+: PRM: add generic API for checking hardreset status
2014-10-27 08:39:25 -07:00
prm2xxx.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm2xxx.h
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm3xxx.c
ARM: make of_device_ids const
2015-02-19 09:44:25 +01:00
prm3xxx.h
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers
2015-01-07 14:27:39 -08:00
prm7xx.h
arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy
2014-07-22 14:35:05 -06:00
prm33xx.c
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm33xx.h
ARM: OMAP2+: PRM: provide generic API for system reset
2014-10-27 08:39:26 -07:00
prm44xx_54xx.h
ARM: OMAP3+: PRM: remove prm_get_reset_sources declaration from headers
2015-01-07 14:27:39 -08:00
prm44xx.c
ARM: make of_device_ids const
2015-02-19 09:44:25 +01:00
prm44xx.h
ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
2013-06-08 11:02:20 -06:00
prm54xx.h
ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
2013-06-08 11:41:01 -06:00
prm_common.c
The clock framework changes for 3.20 contain the usual driver additions,
2015-02-21 12:30:30 -08:00
prm-regbits-24xx.h
ARM: OMAP2: PRM/CM: Cleanup unused header
2013-07-21 21:13:59 -06:00
prm-regbits-33xx.h
ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
2013-08-29 19:10:59 -07:00
prm-regbits-34xx.h
ARM: OMAP3: PRM/CM: Add back macros used by TI DSP/Bridge driver
2014-07-06 15:51:23 -06:00
prm-regbits-44xx.h
ARM: OMAP4: PRM/CM: Cleanup unused header
2013-07-21 22:10:14 -06:00
prm.h
ARM: OMAP3: PRM: add support for legacy iomapping init
2015-01-30 10:55:23 -08:00
prminst44xx.c
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
2014-10-27 08:39:25 -07:00
prminst44xx.h
ARM: OMAP2+: PRM: add generic API for deasserting hardware reset
2014-10-27 08:39:25 -07:00
scrm44xx.h
ARM: OMAP4: clock: Add 44xx data using common struct clk
2012-11-12 19:10:20 -07:00
scrm54xx.h
ARM: OMAP5: SCRM: Add OMAP54XX header file.
2013-06-08 11:55:44 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdram-micron-mt46h32m32lf-6.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdram-nokia.c
ARM: OMAP: remove plat/clock.h
2012-10-18 16:23:20 -07:00
sdram-nokia.h
sdram-numonyx-m65kxxxxam.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdram-qimonda-hyb18m512160af-6.h
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
2012-10-17 10:18:37 -07:00
sdrc2xxx.c
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
sdrc.c
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
2012-11-30 08:40:31 -08:00
sdrc.h
ARM: OMAP2+: raw read and write endian fix
2014-05-08 07:09:53 -07:00
serial.c
ARM: OMAP: serial: remove last vestige of DTR_gpio support.
2014-11-10 09:06:44 -08:00
serial.h
ARM: OMAP2+: Fix relative includes for serial.h
2012-10-31 15:37:14 -07:00
sleep24xx.S
ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
2013-02-06 13:48:14 -07:00
sleep34xx.S
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
2012-11-30 08:40:31 -08:00
sleep44xx.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
smartreflex-class3.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
soc.h
ARM: OMAP2+: Fix ti81xx class type
2015-01-14 17:37:16 -08:00
sr_device.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
sram34xx.S
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
2012-10-21 01:01:11 -06:00
sram242x.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sram243x.S
ARM: convert all "mov.* pc, reg" to "bx reg" for ARMv6+
2014-07-18 12:29:04 +01:00
sram.c
ARM: OMAP4+: Remove static iotable mappings for SRAM
2014-09-18 09:47:35 -07:00
sram.h
ARM: OMAP4+: Remove static iotable mappings for SRAM
2014-09-18 09:47:35 -07:00
ti81xx-restart.c
ARM: OMAP2+: Fix reboot for 81xx
2015-01-14 17:37:16 -08:00
ti81xx.h
ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code
2012-11-08 12:33:07 -07:00
timer.c
ARM: SoC non-critical fixes
2015-02-17 09:15:46 -08:00
twl-common.c
ARM: OMAP: Work around hardcoded interrupts
2015-01-17 08:56:12 -08:00
twl-common.h
ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
2013-01-22 10:34:50 +01:00
usb-host.c
usb: phy: rename <linux/usb/usb_phy_gen_xceiv.h> to <linux/usb/usb_phy_generic.h>
2014-04-21 14:07:24 -05:00
usb-musb.c
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
usb-tusb6010.c
ARM: omap2+: usb-tusb6010.c: Cleaning up variable is set more than once
2014-07-07 04:52:31 -07:00
usb.h
ARM: OMAP2+: Remove unused ti81xx platform init code
2015-01-14 17:21:00 -08:00
vc3xxx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vc44xx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vc.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
vc.h
ARM: OMAP3: Fix idle mode signaling for sys_clkreq and sys_off_mode
2014-05-06 13:48:35 -07:00
voltage.c
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
voltage.h
ARM: OMAP2+: voltage: Remove some unused functions
2015-01-07 09:53:51 -08:00
voltagedomains2xxx_data.c
voltagedomains3xxx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
voltagedomains44xx_data.c
Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock
2012-11-13 13:25:38 -08:00
voltagedomains54xx_data.c
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
2013-06-25 17:11:06 -07:00
vp3xxx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vp44xx_data.c
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
vp.c
OMAP voltage layer updates towards supporting auto-retention/auto-off
2012-11-06 17:06:37 -08:00
vp.h
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
2012-11-05 15:08:22 -08:00
wd_timer.c
arm: mach-omap2: Convert pr_warning to pr_warn
2014-09-18 09:53:57 -07:00
wd_timer.h
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
2012-10-18 16:05:55 -07:00